Filtern
Dokumenttyp
Schlagworte
- Magnetic flux leakage (7)
- GMR (5)
- Sensor array (4)
- Electromagnetic testing (3)
- Finite element method (3)
- Non-destructive testing (3)
- Spherical defects (3)
- Giant magneto resistance (2)
- Adjoint sensitivity analysis (1)
- Eddy current (1)
Eingeladener Vortrag
- nein (1)
Size adapted GMR arrays for the automated inspection of surface breaking cracks in roller bearings
(2014)
Their small size together with a remarkable field sensitivity are the most prominent features of present-day GMR sensors paving the way for various applications in automated non-destructive testing (NDT). This work presents a prototype for fast and automated magnetic testing of roller bearings. A local magnetization unit excites the magnetic field inside the bearing. As a result of a design study and the following wafer fabrication the probe was equipped with NDT-adapted GMR sensor arrays in which 48 elements measures the field response. The detection of artificial and 40 µm deep defects could be resolved with a SNR better than 20 dB. In addition, we report of first results of a POD (Probability of Detection) analysis using GMR sensors to investigate bearings with EDM (electronic discharge machining) notches having depths down to 10 µm. Finally, we estimate successfully the depth of a 57 µm notch from the measured data.
Eddy Current Technique is a powerful method for detection of surface notches and of buried flaws during inspection of metallic parts. Recent EC array probes have demonstrated a fast and efficient control of large surfaces. Nevertheless, when the size of flaws decreases or the defect is rather deep, traditional winding coil probes turn out to be useless. Magnetoresistive sensors present the advantages of flat frequency response and micron size. These sensors are hence very attractive for the detection of buried defects that require low frequencies because of skin depth effect. An optimization of the probe with magnetoresistive sensors as receivers has been made by simulations using CIVA software and finite elements methods with OPERA. EC probes for buried flaw detection have been designed. Experimental results have been compared with simulations.
We present a prototype for automated magnetic stray field testing of ferromagnetic roller bearings. For this purpose NDE-adapted GMR sensor arrays (giant magneto resistance) are used for the detection of surface breaking cracks. The sensors are miniaturized down to the lower µm-regime to achieve adequate spatial resolution. In doing so, sensor arrays with up to 48 elements are used to inspect the bearing surface within a few seconds only. In contrast to magnetic particle inspection (MPI), where the global magnetization requires a further inspection step and succeeding demagnetization, the presented prototype only locally magnetize the surface area in the vicinity of the GMR Sensors. For the local magnetization, the applied sub-surface magnetic field was simulated and proofed for detecting flaws with a depth of a few 10 µm. By multiplexing the sensor array with an adapted read out electronics we quasi simultaneously detect the normal field component of about 100µm above the surface. The detection of artificial notches with a depth of 40 µm and more could be resolved with a SNR better than 20 dB. The presented testing facility is fast and provides a step towards automated testing of safety relevant steel components.
Mechanische Belastung wie z. B. der Rollkontakt zwischen den Rollen und Lagerringen eines Wälzlagers oder der Rad-Schiene-Kontakt bei der Eisenbahn führen bei ferritischen Stählen zu einer Aufhärtung der Oberfläche. Die mit der Aufhärtung verbundene Versprödung begünstigt die Entstehung von Ermüdungsrissen. Zur Risstiefenbestimmung mit dem Wirbelstromprüfverfahren werden in der Regel Kalibrierkörper mit künstlichen Testfehlern aus dem Grundwerkstoff des Prüfteils verwendet. Die betriebsbedingte Aufhärtung der Prüfteiloberfläche bleibt bei der Kalibrierung unberücksichtigt. Die lokale Aufhärtung der Oberfläche führt zu einem ortsabhängigen Offset des Wirbelstromsignals in Richtung der Rissanzeigen und somit zu einer Überbewertung der Risstiefe. Bei einzelnen Rissen lässt sich der Effekt kompensieren, in dem das Wirbelstromgerät neben jedem Riss abgeglichen bzw. die Differenz zwischen dem Offset und der Rissanzeige berechnet wird. In der Realität liegen die Ermüdungsrisse jedoch oft so dicht nebeneinander, dass auf Grund der Überlagerung benachbarter Rissanzeigen weder ein Abgleich zwischen den Rissen noch eine Bestimmung des Offsets möglich ist. Finite-Elemente-Berechnungen ermöglichen es, die in der Realität stets kombiniert auftretenden Wirbelstromsignale der Ermüdungsrisse und der Oberflächenaufhärtung getrennt zu simulieren, um Erkenntnisse für eine Verbesserung der Risstiefenbestimmung zu erlangen.
Zunehmend werden hochpräzise Magnetfeldsensoren in der
Materialprüfung verwendet. Aus dem Zoo der Magnetfeldsensoren eignen sich
GMR-Sensoren (Giant Magneto Resistance) aufgrund ihrer hohen Feld-
Empfindlichkeit, ihrem hohen Signal-Rausch-Verhältnis sowie ihrer kleinen
Sensorflächen (verbunden mit einer hohen Ortsauflösung) hierfür im Besonderen.
Mit GMR-Sensoren wurden Risse untersucht und konnten mit einer Tiefe ≤ 50 µm
noch mit einem guten Signal-Rausch-Verhältnis aufgelöst werden. Die an
Prüfkörpern mit künstlich eingebrachten Defekten gemessenen Streufeldsignale
wurden anhand von analytischen Lösungen verifiziert. Anhand der analytischen
Lösungen wurden auch Defektparameter zu den aufgezeichneten Signalen
rekonstruiert.
Micro-cracks in a magnetized ferromagnetic material cause stray fields that can be observed using giant magnetoresistive (GMR) sensors. This work investigates the applicability of GMR sensors to the non-destructive evaluation of micro-cracks via the observation of stray fields. For this purpose, our measurement setup is assessed using a fast new sensitivity analysis based on adjoint states, employing the finite-element method. A model for the GMR sensor is developed and verified. We are able to resolve micro-cracks with an opening of 3 µm and a depth of 30 µm. GMR positioning inaccuracies are analyzed.
We present a simulation study which pursues the objective to find probe geometries for a MR-based eddy current (EC) probe (MR magneto resistance, e.g., GMR giant magneto resistance, TMR tunnel magneto resistance). MR sensor technology exhibits two significant advantages compared with conventional coil systems. First, MR sensors are relatively frequency-independent within common EC-frequency ranges which enable us to operate them in hidden defects testing problems. Secondly, MR technology is well suited for miniaturization helping us to design small elements in the order of below 100 µm. In this paper simulation and experimental results obtained with the probes for low frequency application, i.e. for hidden defects detection are discussed.
Our simulations are based on two different approaches for a better validation, a commercial finite element method software (Opera, Vectorfields) and the semi-analytical software CIVA. We investigated both coil arrangement in order to excite sufficient high eddy currents inside the test samples and position of MR-elements at the array chip. In doing so the MR sensors were positioned that they are not exposed to excitation fields. In addition, different coil geometries, in particular coil length, e.g. Ι = 20 mm, were analyzed in order to generate a consistent eddy current distribution beneath an array of up to 32 MR-elements. To prove obtained probe principles we built GMR-EC-probes. The first test measurements are in good agreement with the simulations performed by BAM and CEA. On basis of our findings the IMAGIC consortium developed new MR-EC-probes using integrated ASIC technology.