Filtern
Dokumenttyp
Schlagworte
- Active thermography (2)
- Active and passive thermography (1)
- CFRP (1)
- Emissivity (1)
- Fibre reinforced composites (1)
- GFRP (1)
- Laser (1)
- Local thermal excitation (1)
- Tensile loading (1)
- Thermal transport (1)
Untersuchung von Transport- und Schädigungsprozessen mittels lokal angeregter aktiver Thermografie
(2010)
Als schnelles und berührungsfreies Messverfahren kann die aktive
Thermografie auch in-situ eingesetzt werden, d.h. während sich Materialeigenschaften
aufgrund direkter oder indirekter Einflüsse ändern.
In diesem Beitrag stellen wir die Methode der aktiven Thermografie mittels lokaler
Laseranregung und deren Anwendung auf unterschiedliche Materialien wie Holz,
Sandstein und Keramiken vor. Mit der im Folgenden beschriebenen Methode
wurden der Einfluss von Holzschutzmitteln auf die thermischen Eigenschaften von
Holz, Feuchtetransportprozesse in Naturstein sowie die thermischen Eigenschaften
von Siliziumcarbid unterschiedlicher Dicke und von Hochtemperaturkeramiken
nach zunehmender thermischer Belastung in-situ untersucht.
Experimentelle Ergebnisse werden u. a. im Vergleich mit numerischen Simulationen
vorgestellt.
The increased use of fibre-reinforced plastic (FRP) composites for improved efficiency and reliability in energy related applications e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers, also increases the demand for innovative non-destructive testing technologies. Thus, in order to achieve increased acceptance of suited and optimized non-destructive testing (NDT) methods in industry, the European Metrology Research Programme (EMRP) project ENG57 Validated Inspection Techniques for Composites in Energy Applications (VITCEA) deals with the development and validation of innovative NDT technologies. In this contribution, results concerning thermographic investigations at test specimens during tensile loading and active thermography testing after tensile loading are presented. Additionally, the determination of the optical properties (relative transmittance and directional spectral emissivity) of CFRP and GFRP test specimens is described.
The increased use of fibre reinforced plastic (FRP) composites for improved efficiency and reliability in energy related applications, e.g. wind and marine turbine blades, nacelles, oil and gas flexible risers, also increases the demand for innovative non-destructive testing technologies. In this contribution, results concerning the characterisation of CFRP and GFRP during and after quasi-static tensile loading are presented. It includes the measurement of optical properties in the infrared spectral range, tensile loading tests with the observation of the temperature distribution at one or both sides of the specimens using an infrared camera for the preparation and monitoring of intended natural defects, and active thermography inspections after tensile loading. It is shown that the defect preparation was successful. Thermographic monitoring during and active thermography testing after tensile loading enable the detection of the lateral extend of the generated defects. Differences between CFRP and GFRP materials are discussed.
In diesem Beitrag wird die Entwicklung eines aktiven Thermografieverfahrens zur zeit- und ortsaufgelösten in-situ und Echtzeit-Visualisierung von Transport- und Schädigungsprozessen für Anwendungen in Industrie und Umwelt vorgestellt. Das Verfahren ermöglicht unter Verwendung verschiedener thermischer Anregungsquellen u.a. die Bestimmung der thermischen Materialeigenschaften von Keramiken und trockenen und feuchten mineralischen Baustoffen. Schädigungsprozesse in Keramiken können in-situ visualisiert werden. Weiterhin werden Messergebnisse vorgestellt, die während des kapillaren Feuchtetransports in Naturstein erfasst wurden und diesen abbilden können.