Filtern
Dokumenttyp
Schlagworte
- Beton (6)
- Concrete (6)
- Impuls-Thermografie (6)
- Non-destructive testing (5)
- Simulation (5)
- Civil engineering (4)
- Hohlstellen (4)
- Impulse thermography (3)
- Thermografie (3)
- Zerstörungsfreie Prüfung im Bauwesen (3)
Ortung von Hohlstellen und Ablösungen in Betonkonstruktionen mit Radar und Impuls-Thermografie
(2003)
Impulse-thermography has been established as a fast and reliable tool in many areas of non-destructive testing. In recent years several investigations have been done to apply active thermography to civil engineering. For quantitative investigations in this area of application, finite difference calculations have been performed for systematic studies on the influence of environmental conditions, heating power and time, defect depth and size and thermal properties of the bulk material (concrete). The comparison of simulated and experimental data enables the quantitative analysis of defects.
Anwendung der Impuls-Thermografie als quantitatives zerstörungsfreies Prüfverfahren im Bauwesen
(2002)
Zusammenfassung
Die Impuls-Thermografie ist eine aktive Methode zur Strukturuntersuchung von Bauteilen. Im Rahmen eines von der DFG geförderten Projektes wird in Kooperation mit der TU Berlin an der Bundesanstalt für Materialforschung und -prüfung zur Zeit die mögliche Anwendung der Impuls-Thermografie als zerstörungsfreies Prüfverfahren im Bauwesen untersucht.
Die Impuls-Thermografie soll zur Ortung von oberflächennahen Inhomogenitäten, bei denen es sich im Normalfall um Fehlstellen handelt, in typischen Bauteilen verwendet werden und nach Möglichkeit die Geometrie- sowie die Materialparameter der Inhomogenitäten quantitativ bestimmt werden.
Messungen werden derart durchgeführt, dass Oberflächen mit einem geeigneten Heizstrahler erwärmt, die anschließenden Abkühlungsprozesse mit einer Infrarot-Kamera betrachtet und thermische Bilddaten (Thermogramme) aufgezeichnet werden. Der Hauptansatzpunkt für die quantitative Auswertung der Messdaten ist die Betrachtung von Temperatur-Zeit-Kurven (Transienten) des Abkühlungsprozesses über fehlerfreien und fehlerhaften Bereichen des Probekörpers. Zusätzlich werden auf Basis der Finiten-Differenzen-Methode numerische Simulationen durchgeführt. Quantitative Ergebnisse werden sowohl durch den Vergleich der experimentellen Daten mit den Simulationsrechnungen als auch durch eine Anpassung analytischer Funktionen an die Transienten erzielt.
Impulse-thermography is an active method for quantitative investigation of the near surface region of various structures which has recently been applied to civil engineering. It is well suited for the detection of voids and honeycombing in concrete up to concrete covers of 10 cm and more. For quantitative analysis, a computer program for numerical simulation of the heating up and cooling down processes was developed based on Finite Differences. With this program parameter studies have been performed for investigating the influence of environmental conditions, material parameters and geometry on the thermal behaviour. The comparison between experimental and simulated results enables the Inverse Solution.
New thermography systems enable the application of active investigation techniques, i.e. the observation of the cooling down process after heating the surface of a structure under investigation. Defects like voids in concrete having a different thermal diffusivity in comparison to the bulk material are visualised by different surface temperatures. The differences between temperature transient curves above sound regions and above inhomogeneities are expected to include information about the defect parameters.
Experimental investigations with impulse thermography and radar on a concrete test specimen containing voids were analysed. Radar was used to determine the depth of the voids. The influence of size and depth of the voids on the temperature transient curves was studied for different heating times. The transient curves were also fitted with a simple semi-empirical model.
Active infrared thermography in civil engineering - quantitative analysis by numerical simulation
(2003)
The cooling-down process of building structures after heating-up with an external radiation source was analysed to detect voids inside and below the surface. Quantitative results of concrete test specimen containing voids with different sizes at various depths will be presented here. The experimental results were compared to numerical simulations performed with a Finite Difference program developed at BAM.