Filtern
Erscheinungsjahr
- 2006 (9) (entfernen)
Dokumenttyp
Schlagworte
- Concrete (3)
- Impulse-thermography (3)
- Active thermography (2)
- Blind / characteristic frequency (2)
- CFRP-laminates (2)
- Debonding (2)
- Non-destructive testing in civil engineering (2)
- Plaster (2)
- Pulse-phase-thermography (2)
- Quality control (2)
Impulse-thermography is an active method for quantitative investigations of the near surface region of various structures. It has recently been applied and optimised to applications in civil engineering. By using either an internal or external heat source, parts of the structure under investigation are heated up and the transient heat flux is observed by recording the temperature change at the surface as a function of time. This method is very well suited for the detection of voids and honeycombing in concrete, up to concrete covers of 10 cm as well as for the location of delaminations in multi-layered systems (e.g. plaster on concrete, CFRP-laminates on concrete, asphalt on concrete). Also safety relevant defects like voids in tendon ducts and cracks in concrete could be recognised.
False colour infrared (IR) thermography was performed on a sunny summer day in the Berlin Botanic Garden. The main interest focused on blossoms of different size, colours and shapes: disk-, bowl- and funnel-like anatomy demonstrating various modes of light absorption and heating-up during the day. Some of the flowers were phototropic or even solar tracking. Blossom temperatures ranged from 18.0 to 33.3 °C (mean 26.3 ± 2.5 °C, S.D., n = 37) at 21 °C air temperature. Several thermograms showed honey- and bumblebees also. In some cases the results are compared with those of a contact-free IR thermometry. One winter- and one late-spring-flowering plant are included in the overview.
An advanced quantitative approach of pulse-phase-thermography for nondestructive
testing in civil engineering is described in this contribution. The
characteristic frequency of the maximum phase-contrast between defects and sound
areas is used as a means for the characterization of its depth.
The new approach is tested in the laboratory on concrete structures with defects of
polystyrene. The surfaces of the structures were heated with IR-radiators for varying
time periods.
The presented investigations were funded by the Deutsche Forschungsgemeinschaft
(DFG) and were carried out in co-operation with the Technical University of Berlin
(TUB).
The active approach for non-destructive-testing in Civil Engineering (NDT-CE) with infraredthermography (IR), developed at the Federal Institute for Materials Research and Testing (BAM), is described in part one of this contribution. The active IR-approach is based on the principles of impulse- (IT) and pulse-phase-thermography (PPT). The concept is a direct result of a research project at the BAM in cooperation with the Technical University of Berlin (TUB) and was funded by the Deutsche Forschungsgemeinschaft (DFG). In the second part results of the new thermography-scanning system (thermo-scanner) of BAM on debonding of multi-layered structures, especially carbon fibre reinforced plates (CFRP) on concrete are presented. Both, the thermo-scanner developed at BAM, and the investigations carried out, are part of the
EU-Project Sustainable Bridges. In the third part of the paper the characteristic frequency of the optimum phase-contrast as a means for the characterization of defects depth in CE by means of PPT is introduced. A new quantitative approach is tested and discussed on concrete structures with defects of polystyrene and gas concrete.