Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (41)
- Zeitschriftenartikel (15)
- Vortrag (11)
- Posterpräsentation (6)
- Beitrag zu einem Sammelband (4)
- Monografie (1)
- Buchkapitel (1)
Schlagworte
- Drop test (18)
- Drop testing (13)
- Package (8)
- Package testing (5)
- Container (4)
- Radioactive material (4)
- Fire (3)
- Full-scale (3)
- Impact limiter (3)
- Measurement methods (3)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (11)
Integrity of the "POLLUX" cask for final disposal: Experimental results of the mechanical tests
(1995)
This paper describes the analytical, numerical and experimental investigations on the phenomenon of
interactions between cask components and content of packages for the transport of radioactive material during drop
tests required according to the IAEA Regulations for the Safe Transport of Radioactive Material.
Radial and axial gaps between cask components and content are usually necessary for thermal reasons but larger
gaps can exist because of the geometrical dimensions of the specified content. Consequently interactions between
content and cask components (lid system, cask body, etc.) are possible and can not be excluded during drop tests.
Interactions in this context are relative movements between cask and content which are mainly due to elastic spring
effects after releasing the cask for the free drop. These relative movements can cause interior collisions between
content and cask during the main impact of the package onto the unyielding target.
Drop tests with various types of Type A and Type B packages fully instrumented with strain gauges and
accelerometers showed that these interactions respectively interior collisions can be considerable relating to high forces
acting on cask lids, lid bolts and the content. Of course the real quantitative consequences of the interactions depend
upon different conditions, among others the drop orientation, the design characteristics of the impact limiters, the
dimensions of the gaps, the material characteristics of the contents, etc. .
In order to investigate more precisely the phenomenon of interactions BAM carried out finite element
calculations for the named casks using the ABAQUS/ Standard and ABAQUS/ Explicit computer code comparing them
with results obtained from experiments. Additionally, tests with a simplified model instrumented with accelerometers
were carried out accompanied by finite element calculations and analytical calculations using MATHEMATICA.
The investigations on the mentioned phenomena of interaction show that they should be considered in approval design
tests and/ or calculations.
Tests with different Type B casks confirm the existence of effects with stress peaks in cask components due to
interactions between the cask and its contents. These effects can be caused by a delayed strike of the content onto surrounding cask components which cannot be excluded if the content is movable. Some results of the drop tests with two different Type B casks and with a model designed for the study of this problem are presented in the paper. Results of calculations performed with the ABAQUS computer code and by use of analytical methods to simulate the measured effects are discussed.
ANF-18 - A new transport container for fresh PWR fuel assemblies according to IAEA requirements
(2001)
Internal Cask-Content-Collisions During Drop Test of Transport Casks for Radioactive Materials
(2012)
Federal Institute for Materials Research and Testing (BAM) is the competent authority for mechanical and thermal safety assessment of transport packages for spent fuel and high level waste in Germany. In context with package design approval of the new German high level waste cask CASTOR® HAW28M, BAM performed several drop tests with a half scale model of the CASTOR® HAW/TB2. The cask is manufactured by Gesellschaft für Nuklear Service mbH and was tested under accident transport conditions on the 200 tons BAM drop test facility at the BAM Test Site Technical Safety. For this comprehensive test program, the test specimen CASTOR® HAW/TB2 was instrumented at 21 measurement planes with altogether 23 piezo resistive accelerometers, five temperature sensors and 131 triaxial strain gauges in the container interior and exterior respectively. The strains of four representative lid bolts were recorded by four uniaxial strain gauges per each bolt. Helium leakage rate measurements were performed before and after each test in the above noted testing sequence. The paper presents some experimental results of the half scale CASTOR® HAW/TB2 prototype (14 500 kg) and measurement data logging. It illustrates the extensive instrumentation and analyses that are used by BAM for evaluating the cask performance to the mechanical tests required by regulations. Although some of the quantitative deceleration, velocity and strain values cannot be shown because of confidentially issues, they are provided qualitatively to illustrate the types of measurements and methodologies used at BAM.
BAM (Federal Institute for Material Research and Testing) is the competent authority for mechanical and thermal safety assessment of transport packages for spent fuel and high level waste (HLW) in Germany. In context with package design approval of the new German HLW cask CASTOR HAW28M, BAM performed several drop tests with a half-scale model of the CASTOR HAW/TB2. The test model was manufactured by GNS (Gesellschaft fur Nuklear Service mbH) and tested under accident transport conditions on the 200 tons BAM drop test facility at the BAM Test Site Technical Safety. For this comprehensive test program the test specimen CASTOR HAW/TB2 was instrumented at 21 measurement planes with altogether 23 piezo-resistive accelerometers, five temperature sensors and 131 tri-axial strain gauges in the container interior and exterior, respectively. The strains of four representative lid bolts were recorded by four uniaxial strain gauges per each bolt. Helium leakage rate measurements were performed before and after each test in the above noted testing sequence. The paper presents some experimental results of the half-scale CASTOR HAW/TB2 prototype (14,500 kg) and measurement data logging.
The crush test for light weight and low density type B packages was introduced for the first time into the 1985 edition of the International Atomic Energy Agency (IAEA) transport safety regulations. In the early 1970s, the need for an additional mechanical test besides or instead of the well known 9 m drop test was deliberated. Various authors and test facilities, including BAM and Sandia National Laboratories (SNL), were able to prove that the level of safety provided by IAEA drop and puncture tests in the regulations did not protect against dynamic crush forces to smaller packages. As early as the third PATRAM symposium held in 1971 (Richland, WA, USA), Robert F. Barker asked for '... a more strenuous crushing test for protecting small, light weight packages ...' BAM developed from research activities a proposal as to which types of packages should be subject to crush tests and how the crush tests should be performed, which was presented at the 5th PATRAM symposium held in 1978 (Las Vegas, NV, USA). At the IAEA, the possible need for a crush test was first mentioned in 1977. The subject for a discussion, besides the principal need for this test, was also the development of suitable set of crush test boundary conditions. It took more than four years of discussion until a dynamic crush test similar to today's test was recommended by experts to the IAEA regulatory revision panel. Finally, after a rigorous evaluation process in which also the boundary conditions were determined, the crush test was proposed to be incorporated into the IAEA regulations. BAM and SNL participated in the crush test development and implementation process right from the beginning in the early 1970s until its implementation in the IAEA regulations in 1985. Today, BAM performs crush test procedures according to para. 727(c) of TS-R-1, which have not been changed since their first implementation. Crush tests performed in 2002 at BAM will be discussed. These approval design tests were performed on birdcage pellet transport containers under normal and accident conditions according to the IAEA regulations.
For validation of structural integrity under normal and hypothetical accident conditions during transport and storage of dangerous goods the Federal Institute for Materials Research and Testing (BAM) focuses its safety related scientific research on advanced mechanical safety assessment methods including simulation of high rate impact of model components and structures.
An impact and crash test facility was recently developed for performing dynamic impact tests with component size specimen, or to crash specimens of impact limiter materials and structural components.
The paper presents experimental techniques of BAM drop test machine and options of several measurement methods and advancements in order to characterize typical shock-absorbing materials under impact loading conditions. Instrumented drop weight tests are performed to complete materials data base and energy absorption of shock-absorbing materials as well as to implement materials and structural parameters into FEA of reference structures.