Filtern
Dokumenttyp
Sprache
- Deutsch (8)
- Englisch (8)
- Mehrsprachig (1)
Schlagworte
- Thermal shock (3)
- Ceramics (2)
- Weibull statistics (2)
- Acoustic emission (1)
- Active thermography (1)
- Advanced ceramic (1)
- Copper substrate (1)
- Different media (1)
- Differential scanning calorimetry (1)
- Elastische Energie (1)
Eingeladener Vortrag
- nein (4)
In rocket engine combustion chambers, the cooling channels experience extremly high temperatures and environmental attack. Thermal protection can be provided by Thermal Barrier Coatings. Due to the need of good heat conduction, the inner combustion liner is made of copper. The performance of a standard coating system for nickel based substrates is investigated on copper substrates.
Thermal cycling experiments are performed on the coated samples. Due to temperature limitations of the copper substrate material, no thermally grown oxide forms at the interface of the thermal barrier coating and the bond coat. Delamination of the coatings occurs at the interface between the substrate and the bond coat due to oxide formation of the copper at uncoated edges. In real service a totally dense coating can probably not be assured which is the reason why this failure mode is of importance. Different parameters are used for thermal cycling to understand the underlying mechanisms of delamination. Furthermore, laser heating experiments account for the high thermal gradient in real service. Pilot tests which led to a delamination of the coating at the substrate interface were performed successfully.
Thermal barrier coatings (TBCs) are used to increase the operating temperature of land-, sea-, or air-based turbines. As failure of the coating may result in serious damage of the turbine, reliable estimation of the lifetime is essential. Most experiments to assess the lifetime or to determine parameters for simulations of the behavior of TBCs are done by burner-rig-tests, where the operating conditions are simulated by cyclic heating of the surface and cooling of the backside of a coated sample.
In this work a possibility is presented to do comparable experiments by heating the surface with laser irradiation instead of a burner. For this purpose a Nd:YAG-laser with a maximum output power of 1?kW and a wavelength of 1064?nm is used. The laser spot can be moved by integrated optics across the sample surface to achieve homogeneous heating of the coating. Cooling of the backside is done by air. The temperature of the sample surface is determined by an infrared-camera which also enables the possibility to detect failures in the coating via thermography. Additionally, acoustic sensors attached to the sample holder are used to detect failures in the sample. The investigated ceramic material (yttria stabilized zirconia) has a very low absorption coefficient at the used laser wavelength. Therefore, a pre-treatment of the samples was needed to increase the absorption coefficient to be able to heat up the samples.
In this paper, the experimental setup and first experimental results are presented.
Laser induced active thermography for the visualization of transport processes in building materials
(2009)
Der vorliegende Beitrag beschreibt typische Bruchmuster, die an SSiC Proben nach Thermoschockexperimenten beobachtet wurden und korreliert diese qualitativ mit der aufgebrachten Belastung. Der Thermoschock wird durch eine schnelle, in der Probenmitte beginnende spiralförmige Aufheizung dünner Scheiben mit Laserstrahlung realisiert. Durch diese Versuchsführung wandert ein zunehmender Temperaturgradient von der Mitte beginnend in radialer Richtung durch die Probe. Dieser Temperaturgradient ist für die Ausbildung von Druckspannungen im Probeninneren und Zugspannungen im kalten Randbereich der Probe verantwortlich. Beim Erreichen einer kritischen, versagensrelevanten Spannung tritt Probenbruch auf. Dabei wird die bis zu diesem Zeitpunkt in der Probe gespeicherte elastische Energie teilweise in die Schaffung von Rissoberflächen umgewandelt. Der Zusammenhang zwischen gespeicherter elastischer Energie und Bruchmuster wird dargestellt.
Untersuchung von Transport- und Schädigungsprozessen mittels lokal angeregter aktiver Thermografie
(2010)
Als schnelles und berührungsfreies Messverfahren kann die aktive
Thermografie auch in-situ eingesetzt werden, d.h. während sich Materialeigenschaften
aufgrund direkter oder indirekter Einflüsse ändern.
In diesem Beitrag stellen wir die Methode der aktiven Thermografie mittels lokaler
Laseranregung und deren Anwendung auf unterschiedliche Materialien wie Holz,
Sandstein und Keramiken vor. Mit der im Folgenden beschriebenen Methode
wurden der Einfluss von Holzschutzmitteln auf die thermischen Eigenschaften von
Holz, Feuchtetransportprozesse in Naturstein sowie die thermischen Eigenschaften
von Siliziumcarbid unterschiedlicher Dicke und von Hochtemperaturkeramiken
nach zunehmender thermischer Belastung in-situ untersucht.
Experimentelle Ergebnisse werden u. a. im Vergleich mit numerischen Simulationen
vorgestellt.
In diesem Beitrag wird die Entwicklung eines aktiven Thermografieverfahrens zur zeit- und ortsaufgelösten in-situ und Echtzeit-Visualisierung von Transport- und Schädigungsprozessen für Anwendungen in Industrie und Umwelt vorgestellt. Das Verfahren ermöglicht unter Verwendung verschiedener thermischer Anregungsquellen u.a. die Bestimmung der thermischen Materialeigenschaften von Keramiken und trockenen und feuchten mineralischen Baustoffen. Schädigungsprozesse in Keramiken können in-situ visualisiert werden. Weiterhin werden Messergebnisse vorgestellt, die während des kapillaren Feuchtetransports in Naturstein erfasst wurden und diesen abbilden können.