Filtern
Dokumenttyp
Referierte Publikation
- nein (11) (entfernen)
Schlagworte
- Active thermography (1)
- Copper substrate (1)
- Environmental media (1)
- Hochtemperaturanwendungen (1)
- Laser (1)
- Local thermal excitation (1)
- Oxidation protection (1)
- Rocket engine (1)
- Schichtherstellung (1)
- Schichttestung (1)
Eingeladener Vortrag
- nein (4)
In rocket engine combustion chambers, the cooling channels experience extremly high temperatures and environmental attack. Thermal protection can be provided by Thermal Barrier Coatings. Due to the need of good heat conduction, the inner combustion liner is made of copper. The performance of a standard coating system for nickel based substrates is investigated on copper substrates.
Thermal cycling experiments are performed on the coated samples. Due to temperature limitations of the copper substrate material, no thermally grown oxide forms at the interface of the thermal barrier coating and the bond coat. Delamination of the coatings occurs at the interface between the substrate and the bond coat due to oxide formation of the copper at uncoated edges. In real service a totally dense coating can probably not be assured which is the reason why this failure mode is of importance. Different parameters are used for thermal cycling to understand the underlying mechanisms of delamination. Furthermore, laser heating experiments account for the high thermal gradient in real service. Pilot tests which led to a delamination of the coating at the substrate interface were performed successfully.
Laser induced active thermography for the visualization of transport processes in building materials
(2009)
Untersuchung von Transport- und Schädigungsprozessen mittels lokal angeregter aktiver Thermografie
(2010)
Als schnelles und berührungsfreies Messverfahren kann die aktive
Thermografie auch in-situ eingesetzt werden, d.h. während sich Materialeigenschaften
aufgrund direkter oder indirekter Einflüsse ändern.
In diesem Beitrag stellen wir die Methode der aktiven Thermografie mittels lokaler
Laseranregung und deren Anwendung auf unterschiedliche Materialien wie Holz,
Sandstein und Keramiken vor. Mit der im Folgenden beschriebenen Methode
wurden der Einfluss von Holzschutzmitteln auf die thermischen Eigenschaften von
Holz, Feuchtetransportprozesse in Naturstein sowie die thermischen Eigenschaften
von Siliziumcarbid unterschiedlicher Dicke und von Hochtemperaturkeramiken
nach zunehmender thermischer Belastung in-situ untersucht.
Experimentelle Ergebnisse werden u. a. im Vergleich mit numerischen Simulationen
vorgestellt.
In diesem Beitrag wird die Entwicklung eines aktiven Thermografieverfahrens zur zeit- und ortsaufgelösten in-situ und Echtzeit-Visualisierung von Transport- und Schädigungsprozessen für Anwendungen in Industrie und Umwelt vorgestellt. Das Verfahren ermöglicht unter Verwendung verschiedener thermischer Anregungsquellen u.a. die Bestimmung der thermischen Materialeigenschaften von Keramiken und trockenen und feuchten mineralischen Baustoffen. Schädigungsprozesse in Keramiken können in-situ visualisiert werden. Weiterhin werden Messergebnisse vorgestellt, die während des kapillaren Feuchtetransports in Naturstein erfasst wurden und diesen abbilden können.
Laser Thermal Shock Experiments - Performance and Evaluation on the Basis of Advanced Ceramics
(2010)
Laser thermal shock experiments - performance and evaluation on the basis of advanced ceramics
(2011)
The thermal shock behaviour in air and vacuum of three different advanced ceramics is investigated by introducing a new testing method. This thermal shock testing system permits the reproducible setting of defined temperature profiles in thin disks. In order to perform heating - up thermal shock experiments under reproducible conditions and to measure the transient temperature fields, a laser beam is directed spirally across the surface of the specimen. In this process, the specimen is heated up faster than the temperature gradient is compensated by thermal conductivity. Resulting temperature fields were recorded space and time resolved. Based on the knowledge of the local temperature distribution at the moment of failure, the critical fracture stress can be calculated. The scatter of thermal shock strength is quantitatively determined for the tested ceramics by using a improved statistical method.