Filtern
Dokumenttyp
Sprache
- Englisch (15) (entfernen)
Schlagworte
- Airborne ultrasound transducer (2)
- Directivity (2)
- Guided waves (2)
- High pressure airborne ultrasound (2)
- Plate-like structures (2)
- Ray tracing (2)
- Sound pressure (2)
- Thermo-acoustic (2)
- Thermo-acoustic effect (2)
- Thermoacoustic (2)
Ultrasonic investigation of inhomogeneous anisotropic materials such as austenitic welds is complicated because its columnar grain structure leads to curved energy paths, beam splitting and asymmetrical beam profiles. A ray tracing model has potential advantage in analyzing the ultrasonic sound field propagation and there with optimizing the inspection parameters. In this contribution we present a 2D ray tracing model to predict energy ray paths, ray amplitudes and travel times for the three wave modes quasi longitudinal, quasi shear vertical, and shear horizontal waves in austenitic weld materials. Inhomogenity in the austenitic weld material is represented by discretizing the inhomogeneous region into several homogeneous layers. At each interface between the layers the reflection and transmission problem is computed and yields energy direction, amplitude and energy coefficients. The ray amplitudes are computed accurately by taking into account directivity, divergence and density of rays, phase relations as well as transmission coefficients. Ultrasonic sound fields obtained from the ray tracing model are compared quantitatively with the 2D Elastodynamic Finite Integration Technique (EFIT). The excellent agreement between both models confirms the validity of the presented ray tracing results. Experiments are conducted on austenitic weld samples with longitudinal beam transducer as transmitting probe and amplitudes at the rear surface are scanned by means of electrodynamical probes. Finally, the ray tracing model results are also validated through the experiments.
Progress in acoustical defect sizing NDT methods for the inspection of power-plant components
(2012)
The demand of improved NDT methods with proper visualization and sizing
capabilities is a persistent trend in maintenance and manufacturing quality inspection.
Especially when dealing with high quality standards in conjunction with safety-critical
components in the sector of energy and transportation quantitative NDT techniques are
vital to provide reliable quality control systems and a corresponding deeper insight into
the component structure for a further fracture-mechanical estimation. The paper thus
focuses the progress of the defect sizing capabilities of modern Ultrasonic Testing
(UT). In Ultrasonic Testing the SAFT-algorithm (Synthetic Aperture Focusing
Technique) currently experiences a renaissance. The method is based on combining the
data of different transducer positions with their corresponding varied propagating time
and it is currently applied in several industrial applications. SAFT enhances the SNR
and the spatial resolution and is thus a valuable tool when it comes to improved
defect detection and sizing. A tomographic-like data mapping is illustrated on several
examples, where adapted phased array systems were used for the inspection of turbine
components and also for a cladded mock-up of a nuclear reactor pressure vessel. In a
statistical investigation we also performed a comparison with other defect sizing
methods like TOFD (Time of flight diffraction).
In this contribution a simulation tool is developed to compute the energy skewing angles and energy coefficients
for the reflected and refracted plane waves in following general cases: (1) reflection and refraction
of plane elastic waves at an interface between isotropic and transversely isotropic solid, (2) reflection
and refraction of plane elastic waves at an interface between transversely isotropic and isotropic solid, (3)
reflection and refraction of plane elastic waves at an interface between two general transversely isotropic
solid and (4) reflection of plane elastic waves from a stress free boundary of a transversely isotropic solid.
Computational results for analytically evaluated acoustic wave energy skewing angles and energy reflection
and transmission coefficients in acoustically anisotropic materials such as austenitic steel materials
exhibiting columnar grain orientation are presented. The obtained results show that the acoustic energy
skewing angles and coefficients in austenitic steel materials strongly depend upon the columnar grain
orientation and are less influenced by the grain orientations which are parallel and perpendicular to the
interface.
Ultrasonic examination of anisotropic inhomogeneous austenitic welds is challenging, because of the columnar grain structure of the weld leads to beam skewing and splitting. Modeling tools play an important role in understanding the ultrasound field propagation and optimization of experimental parameters during the ultrasonic testing of austenitic welds as well as the interpretation of the test results. In this contribution, an efficient theoretical model based on the ray tracing concepts is developed to calculate the ultrasonic fields in inhomogeneous austenitic welds quantitatively. The developed model determines the ultrasound fields by taking into account the directivity of the ray source, the inhomogenity of the weld as well as ray transmission coefficients. Directivity of the ray source in columnar grained austenitic materials (including layback orientation) is obtained in three dimensions based on Lamb's reciprocity theorem. Ray energy reflection and transmission coefficients at an interface between two general columnar grained austenitic materials are calculated in three dimensions. The ray tracing model predictions on inhomogeneous austenitic weld material are compared against those from CIVA, a commercial non-destructive modeling and simulation tool. The ultrasonic modeling tools in CIVA are based on semi-analytical solutions. For beam propagation simulation, a so-called 'pencil method' is used, which involves modeling the probe as a set of individual source points, each radiating 'a bundle' of diverging rays into the medium and integrating those elementary contributions. Inhomogenity in the weld region is approximated by mapping the grain orientations on weld macrograph. Simulation results for ultrasonic field profiles for an austenitic weld are shown to be in good agreement with the corresponding experimental results.
In this contribution we present a novel thermo-acoustic approach for the generation of broad band airborne ultrasound and investigate the applicability of resonance-free thermo-acoustic emitters for very short high pressure airborne ultrasound pulses. We report on measurements of thermo-acoustic emitter consisting of a 30 nm thin metallic film on a usual soda-lime glass substrate, generating sound pressure values of more than 140 dB at 60 mm distance from the transducer and compare the results with conventional piezoelectric airborne ultrasound transducers. Our experimental investigations show that such thermo-acoustic devices can be used as broad band emitters using pulse excitation.
Defect sizing is required for a quantitative assessment of the quality and reliability of safety relevant components and materials using ultrasonic non-destructive testing. The SAFT (Synthetic Aperture Focussing Technique) and the TOFD technique (Time Of Flight Diffraction) are such promising sizing candidates, extracting more information from the raw ultrasound echo data and the corresponding crack tip response. In this work the phased array technique is used to inspect a clad mock-up model of a pressure vessel section. The full scale model contains artificial test reflectors which are located in the weld and in the cladding region as well. The defects—representing typical flaws at a very early stage—are analysed with different frequencies, beam angles and directions of incidence.
For the reconstruction of reflector indications a SAFT algorithm is applied to the phased array measurement results. Additionally the reflectors are analysed by means of the TOFD technique, using different beam angles at the same time. Both analysis methods are performed using different directions of incidence considering the complex cladding structure underneath the inner surface of the mock-up model. A direct comparison of the SAFT and TOFD techniques shows that, besides the clarity of the results, the detection and sizing capabilities of SAFT are far better.
We present a generalized analytical model of thermo-acoustic sound generation based on the analysis of thermally induced energy density fluctuations and their propagation into the adjacent matter. The model provides exact analytical prediction of the sound pressure generated in fluids and solids; consequently, it can be applied to arbitrary thermal power sources such as thermophones, plasma firings, laser beams, and chemical reactions. Unlike existing approaches, our description also includes acoustic near-field effects and sound-field attenuation. Analytical results are compared with measurements of sound pressures generated by thermo-acoustic transducers in air for frequencies up to 1 MHz. The tested transducers consist of titanium and indium tin oxide coatings on quartz glass and polycarbonate substrates. The model reveals that thermo-acoustic efficiency increases linearly with the supplied thermal power and quadratically with thermal excitation frequency. Comparison of the efficiency of our thermo-acoustic transducers with those of piezoelectric-based airborne ultrasound transducers using impulse excitation showed comparable sound pressure values. The present results show that thermo-acoustic transducers can be applied as broadband, non-resonant, high-performance ultrasound sources.
Thermoacoustic generation of airborne ultrasound using carbon materials at the micro- and nanoscale
(2012)
The generation of airborne ultrasound is presented using the thermoacoustic principle applied to carbon materials at the micro- and nanoscale. Such materials are shown to be capable of emitting ultrasound when being fed by an alternating current. We tested the acoustic performance of carbon fibers, bucky papers and electrospun polyacrylonitrile-derived carbon nanofibers and determined the sound pressure for frequencies up to 350 kHz. A comparison between the experimental results and the theoretical prediction showed remarkable agreement for frequencies up to 150 kHz. Beyond 150 kHz, we found slight deviations from the expected sound pressure dependence on the square root of the frequency.
A method has been developed for the generation of airborne ultrasound using the thermoacoustic principle applied to carbon materials at the micro- and nanoscale. Such materials are shown to be capable to emitting the ultrasound. We tested the acoustic performance of electrospun polyacrylonitrile-derived carbon nanofibers tissues and determined the sound pressure for frequencies up to 350 kHz. The experimental results are compared to analytic calculations.
Ultrasound propagation in inhomogeneous anisotropic materials is difficult to examine because of the directional dependency of elastic properties. Simulation tools play an important role in developing advanced reliable ultrasonic non destructive testing techniques for the inspection of anisotropic materials particularly austenitic cladded materials, austenitic welds and dissimilar welds. In this contribution we present an adapted 2D ray tracing model for evaluating ultrasonic wave fields quantitatively in inhomogeneous anisotropic materials. Inhomogeneity in the anisotropic material is represented by discretizing into several homogeneous layers. According to ray tracing model, ultrasonic ray paths are traced during its energy propagation through various discretized layers of the material and at each interface the problem of reflection and transmission is solved. The presented algorithm evaluates the transducer excited ultrasonic fields accurately by taking into account the directivity of the transducer, divergence of the ray bundle, density of rays and phase relations as well as transmission coefficients. The ray tracing model is able to calculate the ultrasonic wave fields generated by a point source as well as a finite dimension transducer. The ray tracing model results are validated quantitatively with the results obtained from 2D Elastodynamic Finite Integration Technique (EFIT) on several configurations generally occurring in the ultrasonic non destructive testing of anisotropic materials. Finally, the quantitative comparison of ray tracing model results with experiments on 32 mm thick austenitic weld material and 62 mm thick austenitic cladded material is discussed.