Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (5) (entfernen)
Sprache
- Englisch (5)
Referierte Publikation
- ja (5) (entfernen)
Schlagworte
- Ray tracing (3)
- Austenitic cladded material (1)
- Austenitic weld (1)
- Austenitic welds (1)
- Crystal microstructure (1)
- EFIT (1)
- Energy vector (1)
- Lamb wave (1)
- NDT (1)
- Ray directivity (1)
This paper presents the numerical modeling of the Lamb wave propagation in thin plates with the elastodynamic finite integration technique (EFIT) and its validation with the measured results. In general, Lamb waves offer an attractive method to detect the defects inside long plate like structures efficiently. However, such a nondestructive testing (NDT) requires profound understanding of the Lamb wave propagation in the plates, generation of the symmetric and anti-symmetric modes of different orders and their interaction with the defects of the materials. Modern simulation tools based on numerical methods such as the finite integration technique (FIT), the finite element method (FEM) and the boundary element method (BEM) can be used to model this NDT situation. The elastodynamic finite integration technique (EFIT) is an effective tool to model Lamb wave propagation in plates over long distances in an efficient way. With the help of the simulation results obtained from the EFIT tool the propagation of different symmetric and anti-symmetric modes is analyzed and thus a proper technique is developed to excite different modes and to separate them from each other precisely. A validation of the numerical results with the analytical results is also presented.
Ultrasonic investigation of inhomogeneous anisotropic materials such as austenitic welds is complicated because its columnar grain structure leads to curved energy paths, beam splitting and asymmetrical beam profiles. A ray tracing model has potential advantage in analyzing the ultrasonic sound field propagation and there with optimizing the inspection parameters. In this contribution we present a 2D ray tracing model to predict energy ray paths, ray amplitudes and travel times for the three wave modes quasi longitudinal, quasi shear vertical, and shear horizontal waves in austenitic weld materials. Inhomogenity in the austenitic weld material is represented by discretizing the inhomogeneous region into several homogeneous layers. At each interface between the layers the reflection and transmission problem is computed and yields energy direction, amplitude and energy coefficients. The ray amplitudes are computed accurately by taking into account directivity, divergence and density of rays, phase relations as well as transmission coefficients. Ultrasonic sound fields obtained from the ray tracing model are compared quantitatively with the 2D Elastodynamic Finite Integration Technique (EFIT). The excellent agreement between both models confirms the validity of the presented ray tracing results. Experiments are conducted on austenitic weld samples with longitudinal beam transducer as transmitting probe and amplitudes at the rear surface are scanned by means of electrodynamical probes. Finally, the ray tracing model results are also validated through the experiments.
Ultrasound propagation in inhomogeneous anisotropic materials is difficult to examine because of the directional dependency of elastic properties. Simulation tools play an important role in developing advanced reliable ultrasonic testing techniques for the inspection of anisotropic materials particularly austenitic cladded materials and dissimilar welds. A 2-D Ray tracing method is developed for evaluating ray path, amplitude and travel time for three wave modes namely quasi longitudinal wave (qP), quasi shear vertical wave (qSV) and shear horizontal waves (SH) in anisotropic materials such as austenitic cladded materials. The inhomogenity in the anisotropic material is represented by discretizing the anisotropic region into several homogeneous layers. The ray paths are traced during its propagation through the various interfaces between those layers. At each interface the problem of reflection and refraction is solved. The ray amplitudes are computed by taking into account the directivity and phase relations. Ray divergence variation and ray transmission coefficients at each refraction boundary are considered. The Ray tracing results for ultrasonic field profiles in austenitic cladded materials are validated quantitatively by 2-D Elastodynamic Finite Integration Technique (EFIT) results and by the experiments.
Ultrasonic examination of anisotropic inhomogeneous austenitic welds is challenging, because of the columnar grain structure of the weld leads to beam skewing and splitting. Modeling tools play an important role in understanding the ultrasound field propagation and optimization of experimental parameters during the ultrasonic testing of austenitic welds as well as the interpretation of the test results. In this contribution, an efficient theoretical model based on the ray tracing concepts is developed to calculate the ultrasonic fields in inhomogeneous austenitic welds quantitatively. The developed model determines the ultrasound fields by taking into account the directivity of the ray source, the inhomogenity of the weld as well as ray transmission coefficients. Directivity of the ray source in columnar grained austenitic materials (including layback orientation) is obtained in three dimensions based on Lamb's reciprocity theorem. Ray energy reflection and transmission coefficients at an interface between two general columnar grained austenitic materials are calculated in three dimensions. The ray tracing model predictions on inhomogeneous austenitic weld material are compared against those from CIVA, a commercial non-destructive modeling and simulation tool. The ultrasonic modeling tools in CIVA are based on semi-analytical solutions. For beam propagation simulation, a so-called 'pencil method' is used, which involves modeling the probe as a set of individual source points, each radiating 'a bundle' of diverging rays into the medium and integrating those elementary contributions. Inhomogenity in the weld region is approximated by mapping the grain orientations on weld macrograph. Simulation results for ultrasonic field profiles for an austenitic weld are shown to be in good agreement with the corresponding experimental results.
The synthetic aperture focusing technique (SAFT) is an imaging technique commonly used in ultrasonic inspection. In order to apply SAFT to the inspection of austenitic welds, the inhomogeneous anisotropic nature of the weld structure has to be taken into account. A suitable approach to accomplish this, is to couple the SAFT-algorithm with a ray tracing program (RT-SAFT). While SAFT-imaging of cracks in austenitic welds by use of ray tracing has been carried out before, all attempts so far were limited to longitudinal cracks which usually allows a treatment as 2-dimensional problem. In case of transverse cracks, a full 3-dimensional ray tracing is necessary in order to perform a SAFT-reconstruction. In this paper, we give an outline of our attempts to reconstruct images of transverse cracks in austenitic welds, utilizing 3-dimensional ray tracing and a layered structure model derived from an empirical model of grain orientations in welds. We present results of this RT-SAFT on experimental data taken from transverse cracks in different austenitic welds, which show that size and position of the cracks can be estimated with good accuracy, and compare them to images obtained by assuming an isotropic homogeneous medium which corresponds to the application of the classical SAFT-algorithm.