Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (40) (entfernen)
Sprache
- Englisch (34)
- Deutsch (4)
- Mehrsprachig (1)
- Serbisch (1)
Schlagworte
- Aluminium (5)
- Welding (5)
- Grain refinement (4)
- Neural networks (4)
- Friction stir welding (3)
- GTA welding (3)
- Laser beam welding (3)
- Mechanical properties (3)
- Welding simulation (3)
- Automated manufacturing (2)
- Columnar to equiaxed transition (CET) (2)
- FEA (2)
- Fatigue tests (2)
- Festigkeit (2)
- Gas metal arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- High-strength low-alloy steel (2)
- Life Cycle Assessment (LCA) (2)
- Notch stress approach (2)
- Rissbildung (2)
- Temperature (2)
- Tensile tests (2)
- Transformable steels (2)
- Tubular X-joints (2)
- Werkstofffragen (2)
- Wire arc additive manufacturing (2)
- Adaptive control (1)
- Additive manufacturing (1)
- Al Ti5B1 (1)
- AlMg0.7SiTiB filler wire (1)
- Alloy 1050A (1)
- Alloy 5083 (1)
- Alloy 6082 (1)
- Aluminium/Aluminiumlegierungen (1)
- Analysis techniques (1)
- Arc welding (1)
- Automatisierte Fertigung (1)
- Axial force (1)
- Carbon dioxide footprint (1)
- Crack formation (1)
- Design of experiments (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Dissimilar welding (1)
- Duplex nucleation theory (1)
- Dynamic fracture tests (1)
- Economic wide technology replacement (1)
- Energy density distribution (1)
- Energy efficiency (1)
- Energy input (1)
- Environment (1)
- Environmental impact categories (1)
- Epitaxial nucleation (1)
- Equivalent stress concentration factors (1)
- Experimental validation (1)
- Fair salary (1)
- Fracture (1)
- Functional-analytical solution (1)
- GMA welding (1)
- GMA-laser hybrid welding (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Global optimisation (1)
- Grade S960QL steel (1)
- Grain size (1)
- Greenhouse gas mitigation (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat conduction (1)
- Heat flow (1)
- Heat transfer (1)
- High power welding (1)
- High-strength steel (1)
- Hochfester Stahl (1)
- Hochleistungsschweißen (1)
- Hohlprofilknoten (1)
- Human health (1)
- Hybrid laser arc welding (1)
- Inverse heat conduction problem (1)
- Inverse modelling (1)
- Kerbspannungskonzept (1)
- Laser arc-hybrid welding (1)
- Laser beams (1)
- Laser-MSG-Hybridschweißen (1)
- Life cycle assessment (1)
- Life cycle assessment (LCA) (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Local fatigue spproaches (1)
- MAG welding (1)
- MSG-Schweißen (1)
- Martensite start temperature (1)
- Material flow (1)
- Material modeling (1)
- Material questions (1)
- Measurement (1)
- Metallurgische Fragen (1)
- Microcracking (1)
- Model calibration (1)
- Model order reduction (1)
- Model prediction (1)
- Multi-regional inputeoutput data (1)
- Narrow gap welding (1)
- Normen (1)
- Numerical simulation (1)
- Numerical welding simulation (1)
- Open science (1)
- Open source (1)
- Optimisation (1)
- Optimization (1)
- Phase transformation (1)
- Precipitation hardening aluminum alloys (1)
- Prior austenite grain size (1)
- Process innovations (1)
- Proper generalized decomposition (1)
- Research data management (1)
- Residual stress (1)
- Resistance spot welding (1)
- Resource efficiency (1)
- Schweißnahtfehler (1)
- Schweißnahtgeometrie (1)
- Sensor (1)
- Simulating (1)
- Social Life Cycle Assessment (SLCA) (1)
- Standards (1)
- Stochastic search method (1)
- Strain-rate (1)
- Strength (1)
- Stress-strain behavior (1)
- Structural stress approach (1)
- Super martensitic filler material (1)
- Sustainability assessment (1)
- TRIP - transformation induced plasticity (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Tear tests (1)
- Technical crack detection (1)
- Temperature field generation (1)
- Thermal analysis (1)
- Thermal energy generation (1)
- Thermo physical simulation (1)
- Tool torque (1)
- Transformation induced plasticity (TRIP) (1)
- Traverse force (1)
- Tubular joints (1)
- Ultrasonic vibration (1)
- Umweltschutz (1)
- Viscoplasticity (1)
- Volume heat source (1)
- Volumetric heat source (1)
- Weld defects (1)
- Weld seam geometry (1)
- Welding residual stresses (1)
- Welding-induced residual stress (1)
- Weldx (1)
- digital image correlation (1)
- dual phase steel (1)
- resistance spot welding (1)
- sensitivity analysis (1)
- welding residual stresses (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Ökobilanz (1)
Organisationseinheit der BAM
The sound numerical prediction of welding-induced thermal stresses, residual stresses, and distortions strongly depends on the accurate description of a welded material’s thermomechanical deformation behaviour. In this work, we provide experimental data on the viscoplastic deformation behaviour of a grade-s960ql steel up to a temperature of 1000 ◦C. In addition, a multi-phase viscoplastic material model is proposed, which accounts for the experimentally observed isothermal deformation behaviour of grade-s960ql steel base and austenitised material, as well as for athermal contributions that originate from solid-state phase transformations. The multi-phase viscoplastic and a classic rateindependent isotropic hardening material model were applied in the numerical simulations of both-ends-fixed bar Satoh tests and a single-pass gas metal arc weld. The influence of material modelling choices on the agreement between numerical simulation and experimental results is discussed, and recommendations for further work are given.
In order to generate a material data base for computational welding mechanics, temperature and strain-rate dependent stress-strain experiments were performed by using a Gleeble®3500 testing system. The object of the investigation was HSLA transformable steel S960QL and related solid phases as bainite, martensite and austenite. For the production of these solid phases, the base material was heat treated according to an average weld temperature cycle which was extracted within the heat affected zone of a thermal numerical weld simulation of a GMA weld. The hot tensile tests were carried out via cost-saving flat specimen geometries. Two experimental series with different strain-rates were conducted, where the longitudinal strain-rate was controlled by specification of the transversal strain-rate applying Poisson’s-ratio. Subsequently, the resulting stress-strain curves were approximated in accordance with the Ramberg-Osgood-materials law. Consequently, it is shown that the temperature and strain-rate dependent stress-strain behavior of metals can be successfully characterized by means of a Gleeble®-system.
However, this requires a control of the longitudinal strain-rate by specification of the transversal strain-rate. The related experimental procedure and the method of evaluation are explained in detail. With regard to all tested solid phases, a significant strain-rate dependency can only be observed upwards from temperatures of 400 °C. Based on experimental results, Ramberg-Osgood-parameters will be presented to describe the stress-strain behavior of steel S960QL and related solid phases for temperatures between 25 °C and 1200 °C. Furthermore, the use of costsaving flat specimen-geometry appears reasonable.
A combined experimental and numerical approach is applied for a numerical analysis of the non-uniform martensitic transformation kinetic on welding residual stresses and distortion of a single pass weld. The (γ → α)-transformation kinetic within the weld pool region is governed by a non-uniform distribution of the elements chromium and nickel. The single-pass weld was performed by use of the low-alloyed high-strength steel S960QL with the high-alloyed high-strength filler wire CN 13/4-IG®. A thermo-mechanical FE model of the welding process was experimentally validated against temperature field, solid phase distribution, transformation behaviour, X-Ray stress measurements and transient optical distortion measurements.
The experimentally determined and calculated weld residual stresses and transient distortion are in good agreement. It can be shown that the change on the (γ → α)-transformation kinetic driven by the inhomogeneous distribution of the chemical contents causes a strong influence on the weld residual stresses within the volume of the weld pool, which could promote crack propagation within the solidified weld pool by use of high-alloyed filler materials. Furthermore, a significant influence on the development of the transient welding distortion is visible. This influence should be respected during numerically calculation of welding distortion in case of multi-pass welding using interpass temperatures and high-alloyed filler materials.
Single-wire gas metal arc welding (SGMAW) and high power tandem GMAW (TGMAW) are evaluated with respect to energy efficiency. The key performance indicator electrical deposition efficiency is applied to reflect the energy efficiency of GMAW in different material transfer modes. Additionally, the wall-plug efficiency of the equipment is determined in order to identify the overall energy consumption. The results show that energy efficiency can be increased by 24% and welding time is reduced over 50% by application of the tandem processes. A comparative life cycle assessment of a 30-mm-thick weld is conducted to investigate the influences of the energy efficiency on the environmental impacts. The environmental impacts on the categories global warming potential, acidification potential, eutrophication potential, and photochemical ozone creation potential can be reduced up to 11% using an energy-efficient TGMAW process.
This paper investigates gas metal arc welding (GMAW) with respect to energy consumption and its associated environmental impacts. Different material transfer modes and power levels for single wire GMAW (SGMAW) and tandem GMAW (TGMAW) are evaluated by means of the indicator electrical deposition efficiency. Furthermore, the wall-plug efficiency of the equipment is measured in order to describe the total energy consumption from the electricity grid. The results show that the energy efficiency is highly affected by the respective process and can be significantly enhanced by a TGMAW process. The wall-plug efficiency of the equipment shows no significant dependency on the power range or the material transfer mode. Moreover, the method of life cycle assessment (LCA) is adopted in order to investigate the influences of energy efficient welding on the environmental impacts. In the comparative LCA study, the demand of electrical energy is reduced up to 24%. In consequence, the indicator values for global warming potential (100), acidification potential, eutrophication potential, and photochemical ozone creation potential are reduced up to 11%.
Evaluating innovative process technologies has become highly important within the last decades. As standard tools different Life Cycle Assessment methods have been established, which are continuously improved. While those are designed for evaluating single processes they run into difficulties when it comes to assessing environmental impacts of process innovations at macroeconomic level. In this paper we develop a multi-step evaluation framework building on multi regional inputeoutput data that allows estimating macroeconomic impacts of new process technologies, considering the network characteristics of the global economy.
Our procedure is as follows: i) we measure differences in material usage of process alternatives, ii) we identify where the standard processes are located within economic networks and virtually replace those by innovative process technologies, iii) we account for changes within economic systems and evaluate impacts on emissions.
Within this paper we exemplarily apply the methodology to two recently developed innovative technologies: longitudinal large diameter steel pipe welding and turning of high-temperature resistant materials. While we find the macroeconomic impacts of very specific process innovations to be small, its conclusions can significantly differ from traditional process based approaches. Furthermore, information gained from the methodology provides relevant additional insights for decision makers extending the picture gained from traditional process life cycle assessment.
A combined experimental numerical approach is applied to determine the transformation induced plasticity (TRIP)-parameter K for different strength low-alloy steels of grade S355J2+N and S960QL as well as the super martensitic filler CN13-4-IG containing 13 wt% chromium and 4 wt% nickel. The thermo-physical analyses were conducted using a Gleeble® 3500 facility. The thermal histories of the specimens to be tested were extracted from corresponding simulations of a real gas metal arc weldment. In contrast to common TRIP-experiments which are based on complex specimens a simple flat specimen was utilized together with an engineering evaluation method. The evaluation method was validated with literature values for the TRIP-parameter. It could be shown that the proposed approach enables a correct description of the TRIP behavior.
Numerical sensitivity analysis of TRIP-parameter K on weld residual stresses for steel S355J2+ N
(2016)
A combined experimental numerical approach is applied for sensitivity analysis of the transformation induced plasticity (TRIP)-parameter K on weld residual stresses for welding of structural steel of grade S355J2+N. K was determined experimentally using the Gleeble 3500 facility. A thermomechanical FE model of the real welding process was experimentally validated against temperature field and X-ray stress measurements. Within sensitivity analyses K was varied by several orders of magnitude and the influence on the calculated residual stresses is evaluated by performing corresponding FEA. The correct order of magnitude is sufficient to reproduce the residual stresses qualitatively and quantitatively.
Life Cycle Assessment (LCA) and Social Life Cycle Assessment (SLCA) are applied in evaluating possible social and environmental impacts of the state-of-art welding technologies, such as Manual Metal Arc Welding (MMAW), Manual Gas Metal Arc Welding (GMAW), Automatic GMAW and Automatic Laser-Arc Hybrid Welding (LAHW). The LCA results indicate that for 1 meter weld seam, MMAW consumes the largest amount of resources (like filler material and coating on electrodes) and energy, which contributes to comparatively higher environmental impacts in global warming potential, acidification, photochemical ozone creation potential and eutrophication than other chosen processes. With regard to social aspects, the health issues and fair salary are under survey to compare the relative potential risk on human health caused by fumes in different welding technologies, and to indicate the sufficiency of current salary of welders in Germany. The results reflect that the wage status of welders is still fair and sufficient. The manual processes bring much higher potential risk of welders health than the automatic processes, especially MMAW.
This paper presents an approach to reconstruct the three-dimensional transient temperature field for fusion welding processes as input data for computational weld mechanics. The methodology to solve this inverse heat conduction problem fast and automatically focuses on analytical temperature field models for volumetric heat sources and application of global optimisation. The important issue addressed here is the question which experimental data is needed to guarantee a unique reconstruction of the experimental temperature field. Different computational-experimental test cases are executed to determine the influence of various sets of discrete experimental data on the solvability of the optimisation problem. The application of energy distributions utilised for laser beam welding allows reconstructing the temperature field efficiently. Furthermore, the heat input into the workpiece determined by the simulation contributes to the evaluation of the thermal efficiency of the welding process.