Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (40) (entfernen)
Sprache
- Englisch (34)
- Deutsch (4)
- Mehrsprachig (1)
- Serbisch (1)
Schlagworte
- Aluminium (5)
- Welding (5)
- Grain refinement (4)
- Neural networks (4)
- Friction stir welding (3)
- GTA welding (3)
- Laser beam welding (3)
- Mechanical properties (3)
- Welding simulation (3)
- Automated manufacturing (2)
- Columnar to equiaxed transition (CET) (2)
- FEA (2)
- Fatigue tests (2)
- Festigkeit (2)
- Gas metal arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- High-strength low-alloy steel (2)
- Life Cycle Assessment (LCA) (2)
- Notch stress approach (2)
- Rissbildung (2)
- Temperature (2)
- Tensile tests (2)
- Transformable steels (2)
- Tubular X-joints (2)
- Werkstofffragen (2)
- Wire arc additive manufacturing (2)
- Adaptive control (1)
- Additive manufacturing (1)
- Al Ti5B1 (1)
- AlMg0.7SiTiB filler wire (1)
- Alloy 1050A (1)
- Alloy 5083 (1)
- Alloy 6082 (1)
- Aluminium/Aluminiumlegierungen (1)
- Analysis techniques (1)
- Arc welding (1)
- Automatisierte Fertigung (1)
- Axial force (1)
- Carbon dioxide footprint (1)
- Crack formation (1)
- Design of experiments (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Dissimilar welding (1)
- Duplex nucleation theory (1)
- Dynamic fracture tests (1)
- Economic wide technology replacement (1)
- Energy density distribution (1)
- Energy efficiency (1)
- Energy input (1)
- Environment (1)
- Environmental impact categories (1)
- Epitaxial nucleation (1)
- Equivalent stress concentration factors (1)
- Experimental validation (1)
- Fair salary (1)
- Fracture (1)
- Functional-analytical solution (1)
- GMA welding (1)
- GMA-laser hybrid welding (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Global optimisation (1)
- Grade S960QL steel (1)
- Grain size (1)
- Greenhouse gas mitigation (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat conduction (1)
- Heat flow (1)
- Heat transfer (1)
- High power welding (1)
- High-strength steel (1)
- Hochfester Stahl (1)
- Hochleistungsschweißen (1)
- Hohlprofilknoten (1)
- Human health (1)
- Hybrid laser arc welding (1)
- Inverse heat conduction problem (1)
- Inverse modelling (1)
- Kerbspannungskonzept (1)
- Laser arc-hybrid welding (1)
- Laser beams (1)
- Laser-MSG-Hybridschweißen (1)
- Life cycle assessment (1)
- Life cycle assessment (LCA) (1)
- Life-cycle assessment (1)
- Lifetime (1)
- Local fatigue spproaches (1)
- MAG welding (1)
- MSG-Schweißen (1)
- Martensite start temperature (1)
- Material flow (1)
- Material modeling (1)
- Material questions (1)
- Measurement (1)
- Metallurgische Fragen (1)
- Microcracking (1)
- Model calibration (1)
- Model order reduction (1)
- Model prediction (1)
- Multi-regional inputeoutput data (1)
- Narrow gap welding (1)
- Normen (1)
- Numerical simulation (1)
- Numerical welding simulation (1)
- Open science (1)
- Open source (1)
- Optimisation (1)
- Optimization (1)
- Phase transformation (1)
- Precipitation hardening aluminum alloys (1)
- Prior austenite grain size (1)
- Process innovations (1)
- Proper generalized decomposition (1)
- Research data management (1)
- Residual stress (1)
- Resistance spot welding (1)
- Resource efficiency (1)
- Schweißnahtfehler (1)
- Schweißnahtgeometrie (1)
- Sensor (1)
- Simulating (1)
- Social Life Cycle Assessment (SLCA) (1)
- Standards (1)
- Stochastic search method (1)
- Strain-rate (1)
- Strength (1)
- Stress-strain behavior (1)
- Structural stress approach (1)
- Super martensitic filler material (1)
- Sustainability assessment (1)
- TRIP - transformation induced plasticity (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Tear tests (1)
- Technical crack detection (1)
- Temperature field generation (1)
- Thermal analysis (1)
- Thermal energy generation (1)
- Thermo physical simulation (1)
- Tool torque (1)
- Transformation induced plasticity (TRIP) (1)
- Traverse force (1)
- Tubular joints (1)
- Ultrasonic vibration (1)
- Umweltschutz (1)
- Viscoplasticity (1)
- Volume heat source (1)
- Volumetric heat source (1)
- Weld defects (1)
- Weld seam geometry (1)
- Welding residual stresses (1)
- Welding-induced residual stress (1)
- Weldx (1)
- digital image correlation (1)
- dual phase steel (1)
- resistance spot welding (1)
- sensitivity analysis (1)
- welding residual stresses (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Ökobilanz (1)
Organisationseinheit der BAM
The increasing adoption of Open Science principles has been a prevalent topic in the welding science community over the last years. Providing access to welding knowledge in the form of complex and complete datasets in addition to peer-reviewed publications can be identified as an important step to promote knowledge exchange and cooperation. There exist previous efforts on building data models specifically for fusion welding applications; however, a common agreed upon implementation that is used by the community is still lacking. One proven approach in other domains has been the use of an openly accessible and agreed upon file and data format used for archiving and sharing domain knowledge in the form of experimental data. Going into a similar direction, the welding community faces particular practical, technical, and also ideological challenges that are discussed in this paper. Collaboratively building upon previous work with modern tools and platforms, the authors motivate, propose, and outline the use of a common file format specifically tailored to the needs of the welding research community as a complement to other already established Open Science practices. Successfully establishing a culture of openly accessible research data has the potential to significantly stimulate progress in welding research.
Numerical sensitivity analysis of TRIP-parameter K on weld residual stresses for steel S355J2+ N
(2016)
A combined experimental numerical approach is applied for sensitivity analysis of the transformation induced plasticity (TRIP)-parameter K on weld residual stresses for welding of structural steel of grade S355J2+N. K was determined experimentally using the Gleeble 3500 facility. A thermomechanical FE model of the real welding process was experimentally validated against temperature field and X-ray stress measurements. Within sensitivity analyses K was varied by several orders of magnitude and the influence on the calculated residual stresses is evaluated by performing corresponding FEA. The correct order of magnitude is sufficient to reproduce the residual stresses qualitatively and quantitatively.
Modeling of gas metal arc welding process using an analytically determined volumetric heat source
(2013)
High peak temperature and continuous deposition of electrode droplets in the weld puddle inhibit real-time monitoring of thermal cycles and bead dimensions in gas metal arc welding. A three-dimensional numerical heat transfer model is presented here to compute temperature field and bead dimensions considering a volumetric heat source to account for the transfer of arc energy into the weld pool. The heat source dimensions are analytically estimated as function of welding conditions and original joint geometry. The deposition of electrode material is modeled using deactivation and activation of discrete elements in a presumed V-groove joint geometry. The computed values of bead dimensions and thermal cycles are validated with the corresponding measured results. A comparison of the analytically estimated heat source dimensions and the corresponding numerically computed bead dimensions indicate that the former could rightly serve as the basis for conduction heat transfer based models of gas metal arc welding process.
Microcrack formation during gas metal arc welding of high-strength fine-grained structural steel
(2014)
The recent development of high-performance-modified spray arc processes in gas metal arc welding due to modern digital control technology and inverter power sources enables a focused spray arc, which results in higher penetration depths and welding speed. However, microcracks occurred in the weld metal while approaching the process limits of the modified spray arc, represented by a 20-mm double layer DV-groove butt-weld. These cracks were detected in structural steel exhibiting a yield strength level of up to 960 MPa and are neither dependent on the used weld power source nor a consequence of the modified spray arc process itself. The metallographic and fractographic investigations of the rather exceptional fracture surface lead to the classification of the microcracks as hot cracks. The effects of certain welding parameters on the crack probability are clarified using a statistical design of experiment. However, these microcracks do not impact the design specification for toughness in the Charpy V-notch test (absorbed energy at -40 °C for the present material is 30 J).
The objective of this paper is to demonstrate a new simulation technique which allows fast and automatic generation of temperature fields as input for subsequent thermomechanical welding simulation. The basic idea is to decompose the process model into an empirical part based on neural networks and a phenomenological part that describes the physical phenomena. The strength of this composite modelling approach is the automatic calibration of mathematical models against experimental data without the need for manual interference by an experienced user. As an example for typical applications in laser beam and GMA-laser hybrid welding, it is shown that even 3D heat conduction models of a low complexity can approximate measured temperature fields with a sufficient accuracy. In general, any derivation of model fitting parameters from the real process adds uncertainties to the simulation independent of the complexity of the underlying phenomenological model. The modelling technique presented hybridises empirical and phenomenological models. It reduces the model uncertainties by exploiting additional information which keeps normally hidden in the data measured when the model calibration is performed against few experimental data sets. In contrast, here the optimal model parameter set corresponding to a given process parameter is computed by means of an empirical submodel based on relatively large set of experimental data. The approach allows making a contribution to an efficient compensation of modelling inaccuracies and lack of knowledge about thermophysical material properties or boundary conditions. Two illustrating examples are provided.
Ultrasonic vibration enhanced friction stir welding (UVeFSW) is a recent modification of conventional friction stir welding (FSW), which transmits ultrasonic vibration directly into the localized area of the workpiece near and ahead of the rotating tool. In this study, a high strength aluminium alloy (2024-T4) was welded by this process and conventional FSW, respectively. Then tensile tests, microhardness tests and fracture surface analysis were performed successively on the welding samples. The tests results reveal that ultrasonic vibration can improve the tensile strength and the elongation of welded joints. The microhardness of the stir zone also increases.
Resistance spot welding (RSW) is widely used in the automotive industry
as the main joining method. Generally, an automotive body contains
around 2000 to 5000 spot welds. Therefore, it is of decisive importance to characterize the mechanical properties of these areas for the further optimization and improvement of an automotive body structure. The present paper aims to introduce a novel method to investigate the mechanical properties and microstructure of the resistance spot weldment of DP1000 sheet steel. In this method, the microstructure of RSW of two sheets was reproduced on one sheet and on a bigger area by changing of the welding parameters, e. g. welding current, welding time, electrode force and type. Then, tensile tests in combination with digital Image correlation (DIC) measurement were performed on the notched tensile specimens to determine the mechanical properties of the weld metal.
The notch must be made on the welded tensile specimen to force the fracture and elongation on the weld metal, enabling the characterization of its properties. Additionally, the parameters of a nonlinear isotropic material model can be obtained and verified by the simulation of the tensile specimens. The parameters obtained show that the strength of DP1000 steel and the velocity of dislocations for reaching the Maximum value of strain hardening, are significantly increased after RSW. The effect of sample geometry and microstructural inhomogeneity of the welded joint on the constitutive property of the weld metal are presented and discussed.
Life Cycle Assessment (LCA) is applied in evaluating environmental impacts of state-of-the-art welding technologies. Manual Metal Arc Welding (MMAW), Laser Arc-Hybrid Welding (LAHW) and two Gas Metal Arc Welding (GMAW) variants are used to join a plate of 20 mm thick structural steel. The LCA results indicate that for 1 m weld seam, MMAW causes the highest environmental impacts in global warming potential (GWP), eutrophication potential (EP), acidification potential (AP), and photochemical ozone creation potential (POCP) among the selected processes, and the LAHW variant performances the least. Filler material and electricity consumptions generally dominate the impacts and reach shares of up to 80% and 61% in the respective impact categories. However, electrode coating consumption in MMAW remarkably contributes impacts on AP and EP, for instance 52% of AP and 76% of EP. Strategies for improvement of the applied welding technologies are discussed.
The high amount of resource consumption of fusion welding processes offers the potential to reduce their environmental impact. While the driving forces are known froma qualitative perspective, the quantitative assessment of the crucial parameters is not a trivial task. Therefore, herein, a welding-specific methodology to utilize life cycle assessment as a tool for evaluating the environmental impact of fusion welding processes is presented. In this context, two welding processes, resistance spot welding and laser beam welding, are analyzed for two different use cases.
These comprise the welding of shear test specimens and a cap profile made of electrogalvanized sheets of DC 05þ ZE (1.0312) as representative of an automotive application. For both welding processes, the main influences on the resulting environmental impact categories are evaluated and compared. The requirements for ecological efficient welding processes are discussed and implemented.