Filtern
Dokumenttyp
Schlagworte
- LTCC (9)
- Ferrite (4)
- Capacitor (3)
- Co-firing (3)
- Barium titanate (2)
- Capacitors (2)
- BaTiO3 (1)
- BaTiO3 and titanates (1)
- Bariumtitanat (1)
- Brazing (1)
- Ceramic-ceramc joints (1)
- Cofiring (1)
- Compsite tapes (1)
- Constrained sintering (1)
- Dickschicht (1)
- Dielectric properties (1)
- Ferrites (1)
- Grenzflächenreaktion (1)
- High-K Keramik (1)
- Inkjet (1)
- Interface (1)
- Keramische Multilayer (1)
- Kondensator (1)
- LTCC modules (1)
- LiF (1)
- MnZn-ferrite (1)
- Permeability (1)
- Shrinkage behavior (1)
- Silver conductor (1)
- Silver conductors (1)
- Sintering (1)
- Tintenstrahldruck (1)
Eingeladener Vortrag
- nein (6)
Silver in LTCC - Interfacial reactions, transport processes and influence on properties of ceramics
(2009)
Due to addition of minor amounts of suitable additive combinations to BaTiO3 powder the sintering temperature was reduced to 900 °C. Excellent densification (more than 98% of theoretical density) and good dielectric properties were achieved after sintering at 900 °C for 2 hours. Dielectric properties can be improved by modifying the composition of sintering additives and additon of further dopants. The low sintering temperature of newly developed capacitor material allows a co-sintering with pure silver electrodes. No interfacial reaction between silver electrodes and ceramics was observed by microprobe analysis. The dielectric constants of about 1200 to 3000 and the dielectric losses of about 0.008 to 0.02 were measured (f = 1 kHz, T = 25 °C). The temperature dependency of dielectric constant for new capacitor materials is low, almost X7R characteristics. Furthermore, the densification and the dielectric properties of embedded capacitors in LTCC were investigated.