Filtern
Dokumenttyp
- Beitrag zu einem Sammelband (10) (entfernen)
Referierte Publikation
- nein (10)
Schlagworte
- Masonry (2)
- Non-destructive testing (2)
- Radar (2)
- SAFT (2)
- Ultrasonic (2)
- Asphalt (1)
- Beton (1)
- Bildgebende Darstellung (1)
- Concrete (1)
- EFIT Modelling (1)
Since several years ultrasonic imaging techniques are used for testing concrete elements. Combined with a reconstruction calculation they lead to an acoustic imaging of scatterers and reflectors from the inside of the concrete element. For several testing problems it is an advantage to use a two dimensional synthetic aperture and to combine it with a three-dimensional reconstruction calculation (3D-SAFT, Synthetic Aperture Focussing Technique).
This enables the analysis of the tested volume by means of B-scans in two directions and C-scans (projections parallel to the surface), respectively. Using the 2D-scanning technique, especially the disturbing influence of the reinforcing rebars can be minimised.
In this contribution the state of the art of this method is demonstrated and analysed. Examples of the application are presented, concerning
Localisation of honeycombing and compaction faults
Characterisation of cracks (especially measuring the crack depth)
Investigation of tendon ducts
The results presented are obtained in the frame of a research initiative Non-destructive Evaluation of Concrete Structures Using Acoustic and Electromagnetic Echo-Methods supported by the German Science Council (FOR 384 of DFG, Deutsche Forschungsgemeinschaft). The methods are assessed and improved in cooperation with the partners participating in the project.
During the re-use process of existing concrete memebers like foundations information about geometry and location of piles or strip foundation is necessary. Ultrasonic echo with a need of only one-sided access may provide this information and help the engineer to assess foundations. Cost effectiveness by the re-use of foundations gains an increasing economic role due to decreasing average economic lifetime of buildings on urban sites. Results of systematic ultrasonic echo investigations at a slab from 75 cm to 125 cm thickness with ten different reinforcement ratios are presented. The influence of the varying reinforcement ratio and thickness on the reliability of the results is shown. Available data-processing algorithms based on reconstruction calculation and imaging of results to reveal the geometry of a slab and the location of piles or strip foundations are introduced. Practical guidance for the application of ultrasonic echo and its limits are presented to ensure reliable results.
Ultrasonic Reflection Properties at Interfaces Between Concrete Steel and Air: Imaging and Modelling
(2006)
Non-destructive and minor destructive testing methods enable a classification of historic structures, building processes, applied building technologies and materials. Therefore, these methods should be part of the global investigation of historic buildings which is usually required before the planning of any building intervention. The case study presented herein encompasses experimental work carried out at the St. Servatius Church in Quedlinburg, Germany. Within a comprehensive restoration campaign, non-destructive on-site investigations were carried out with radar and ultrasonics. The results were combined with plans, views and cores recorded in advance.