Filtern
Erscheinungsjahr
- 2014 (7) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (5)
- Beitrag zu einem Sammelband (1)
- Vortrag (1)
Schlagworte
- Rheology (2)
- Anti-graffiti agent (1)
- Beton (1)
- Betonangriff (1)
- Brick (1)
- Cleaning efficacy (1)
- Compatibility (1)
- Concrete (1)
- Concrete (E) (1)
- Cultural Heritage (1)
Eingeladener Vortrag
- nein (1)
Cultural Heritage objects are in many cases invaluable and irrecoverable, therefore their protection is a prior goal. One threat arises by intentionally defacing such objects with graffiti. One possibility to face the imminent threat is the application of a surface protection in form of anti-graffiti systems (AGS). However, the knowledge about the performance and durability of AGS on substrates used for historical buildings is still fragmented. The goal of the presented study was to investigate the performance of a newly developed agent in comparison to a selection of commercial anti-graffiti agents on different substrates, which were used for historical buildings. Four commercial anti-graffiti agents with different chemical formulations were selected and tested with the new agent on different stone and brick substrates. The results showed clearly that AGS based on dense, water vapour impermeable coatings are not suitable to porous substrates such as sandstone, brick or porous limestone due to their impair of the hygric properties and the visual appearance of a substrate. The new agent could not completely reach the cleaning efficacy of the dense coatings but exhibited a much lower impact on the properties of the substrate and was therefore better compatible to historical surfaces.
Though, concrete in general is a non-combustible building material, modern High Performance Concrete (HPC) is very susceptible to violent explosive spalling during a fire attack. This requires protective measures for fire safety design of concrete structures. The current most worthwhile method to prevent explosive spalling is the addition of monofilament Polypropylene fibres (PP-fibres). However, since it has become common knowledge that PP-fibres are suitable for fire safety design, a variety of theories concerning the mode of action of PP-fibres have been suggested. The present article summarizes the most important hypothesis and presents an innovative method for the analysis of micro structural processes in heated specimens. The results show that due to the thermal decomposition of PP-fibres capillary channels are created. Simultaneously, a netlike micro crack formation occurs, which connects these capillary channels. This enables the relief of internal stresses (mechanical effect) and the formation of a permeable transport system for the escaping water vapour (permeation effect).
High resolution synchrotron X-ray diffraction (SyXRD) was applied for a microstructural profile analysis of concrete deterioration after sulfate attack. The cement matrices consist of ordinary Portland cement and different amounts of supplementary cementitious materials, such as fly ash, natural pozzolana and granulated blast furnace slag. The changes of the phase composition were determined along the direction of sulfate ingress. This approach allows the identification of reaction fronts and zones of different phase compositions and conclusions about the mechanisms of sulfate attack. Two reaction fronts were localized in the initial 4 mm from the sample surface. The mechanism of deterioration caused by the exposition in the sulfate-bearing soil is discussed. SyXRD is shown to be a reliable method for investigation of cementitious materials with aggregates embedded in natural environments.
The fresh behaviour of self-compacting concrete (SCC) at varying temperatures differs from that of normal vibrated concrete. This is because the rheology of SCC depends not only on degree of cement hydration, but also on the adsorption of superplasticizers – mostly polycarboxylate based polymers (PCE) -, which is affected by the time and hydration progress. Due to the variety of PCEs and mixture compositions for SCC a prediction of the rheology at varying temperatures is complicated. The charge densities of PCEs as well as the water to solid ratio in the paste are identified to be the main decisive parameters for robust fresh concrete properties.
Rheometric concrete investigations with different SCC mixture compositions and varied anionic charge densities of the PCE were conducted. SCC which is rich in powder components showed robust performance at low temperatures while SCC with low powder content was favourable at high temperatures. High charge density PCE pointed out to be very robust at low temperatures but at high temperatures it significantly reduced the flow retention. Low charge density PCE could not generate self-compacting properties at low temperatures but retained the flow performance over sufficiently long time. Based on considerations about particle interactions and adsorption mechanisms of PCEs, the relevant processes are explained and options for the development of robust mixture compositions for individual temperature ranges are itemised.
Chemischer Angriff auf Betonbauwerke - Bewertung des Angriffsgrads und geeignete Schutzprinzipien
(2014)
In verschiedenen Bereichen des Betonbaus ist Beton einem chemischen Angriff von außen ausgesetzt, der die Dauerhaftigkeit des betreffenden Bauteils bzw. des gesamten Bauwerks beeinträchtigen kann. Für einen chemischen Angriff in natürlichen Böden und Grundwässern bestehen normative Vorgaben in DIN 4030-1 [R10] bzw. DIN 1045-2 [R19], um den Angriffsgrad anhand der Art und Konzentration der angreifenden Stoffe in Expositionsklassen XA1 (schwach angreifend) bis XA3 (stark angreifend) einzustufen. Hinsichtlich weiterer maßgeblicher Einflussfaktoren wird an dieser Stelle nicht näher differenziert, ob und inwieweit die Regelungen für Böden und Grundwässer auch auf andere Bereiche mit chemischem Angriff auf Beton zu übertragen sind, ist stets im Einzelfall zu überprüfen. Ebenfalls sind die zu treffenden Maßnahmen über die Vorgaben der DIN EN 206-1/DIN 1045-2 [R19] hinaus anwendungsspezifisch festzulegen. Der Hauptausschuss Baustofftechnik (HABT) des DBV hat daher den Arbeitskreis "Chemischer Angriff auf Beton" beauftragt, dieses Merkblatt zu erarbeiten, das Hilfestellung bei der Bewertung einer projektspezifischen chemischen Angriffssituation auf Beton sowie bei der Planung und Ausführung von Schutzprinzipien leisten soll.
To design robust self-consolidating concrete (SCC) for various environmental conditions, it is essential to understand the relevant mechanisms that control the flow performance. This paper depicts how high range water reducing agents (HRWRAs) interact with clinker and hydration phases, and it discusses the important role of the charge density of polycarboxylic HRWRAs in the way the rheology is affected. Based on the rheometric investigations on SCC mixture compositions with different water to powder ratios (w/p) and observations of their pastes' Vicat setting times, the study shows that increasing charge densities of the HRWRA and decreasing w/p reduce the flow retention and have lesser retarding effect on the setting. Based on the test results and discussions optimization procedures for the mixture composition and the HRWRA modification are suggested to achieve optimized performance for varying environmental situations and highest robustness for specific conditions.