Filtern
Erscheinungsjahr
- 2014 (4) (entfernen)
Dokumenttyp
Referierte Publikation
- ja (4) (entfernen)
Schlagworte
- Crash-material (2)
- Crashkörper (2)
- Energiedissipation (2)
- Energy dissipation (2)
- Explosionsbeanspruchung (2)
- Fassadenverankerung (2)
- Façade connector (2)
- Aerodynamic damping (1)
- Baustoffe (1)
- Bemessungskonzeptblast loads (1)
Energiedissipierende Fassadenverankerung mit Crashmaterial für explosionsbeanspruchte Gebäude
(2014)
Wenn repräsentative Bauwerke wie Botschaften und Flughäfen außergewöhnlichen Lasten aus Explosion ausgesetzt sind, dann kann das Ausmaß des zu erwartenden Schadens aus einer solchen Belastung durch den Einsatz von energiedissipierenden Schutzbauteilen in der Fassadenverankerung begrenzt werden. Bisher ist über das Tragverhalten solcher Schutzbauteile wenig bekannt. In diesem Aufsatz werden Konstruktion und Wirkungsweise einer Verankerung für vorgehängte Fassaden vorgestellt, die in der Lage sind, einen Teil der Stoßenergie über Verformung eines Crashmaterials zu dissipieren. Versuche an einer bauteilähnlichen Konstruktion liefern Informationen über das Tragverhalten der Fassadenverankerung, insbesondere bei dynamischen Belastungen. Aus den Ergebnissen wird ein Konzept für die Vordimensionierung der vorgestellten Schutzbauteile abgeleitet.-----------------------------------------------------------------------------------------------------------------------------------------------------------
In the past few years public awareness of the need to protect structures against blast effects has risen. Blast wave energy is transmitted to the supporting structure by its façade connectors. Energy dissipating protective components placed at the connectors allow protecting people in the building as well as the primary building structure from damage. In this paper we present a protective component that dissipates blast energy by crash material. The report explores the system's fundamentals of operation from an experimental point of view. The results of dynamic tests are the basis of a design concept for the protective components.
Die Forderung, für repräsentative Bauwerke wie Botschaften und Flughäfen auch außergewöhnliche Lasten aus Explosion zu berücksichtigen, wurde in jüngerer Vergangenheit zunehmend gestellt. Das aufgrund dieser Lasten zu erwartende Schadensausmaß kann durch den Einsatz von energiedissipierenden Schutzbauteilen in der Fassadenbefestigung begrenzt werden. Die Dissipation der Explosionsenergie in den Schutzbauteilen kann beispielsweise über ein Crashmaterial erfolgen. In diesem Aufsatz werden Untersuchungen an zementgebundenen Materialien, die diesem Zweck dienen sollen, vorgestellt. Der Einfluss unterschiedlicher Zusätze auf die für ein Crashmaterial maßgebenden Eigenschaften wird in einer Parameterstudie untersucht. Als besonders geeignet wird ein Material identifiziert, bei dem die Zugabe eines Gasbildners das Matrixgefüge im Hinblick auf das gewünschte Kraft-Verformungs-Verhalten positiv verändert. Dynamische Versuche mit diesem Material geben Aufschluss über dessen Komprimierungsverhalten bei hohen Stauchraten.-----------------------------------------------------------------------------------------------------------------------------------------------
In the past few years public awareness of the need to protect structures against blast effects has risen. Energy dissipating protective components placed at the façade connectors allow protecting people in the building as well as the primary building structure from damage due to blast loads. One possibility to dissipate the blast energy is using protective components with crash material. This paper presents tests on cementitious crash materials studying the effect of different additives to the compression-behavior of the material. Additional experiments enable analyzing the material behavior under static and dynamic test conditions.
Overhead transmission lines are very sensitive structures in regards to wind action. The cables, spanning over a few hundred meters contribute in particular to the overall action on the suspension towers. These slender structures incorporate both structural nonlinearities from the large deformation of the cables and aerodynamic nonlinearities which need to be accounted for when it is to estimate the system response to strong wind events. In this work, a finite element procedure is presented to model an existing power line section using nonlinear cable elements. The wind force is assumed quasi-steady with force coefficients determined in wind tunnel test on a conductor section. Further, aerodynamic damping is incorporated by considering the relative velocity between cable nodes and oncoming wind flow. The results are compared with on-site measurements of the cables support reaction. The results show a significant effect of damping since almost no resonant amplification is visible both in observation and simulation. In addition, wind tunnel tests approved aerodynamic damping to be large for the system of sagging cables, but nonlinear in its nature. It is concluded, that the dynamic response of overhead transmission line cables has to be modeled with care, considering all sources of nonlinearities. That is of particular interest in case of random excitation such as wind because the peak response depends on the probability distribution of the system's response.
Overhead transmission line cables under wind gust loading - measurements and numerical simulations
(2014)
Overhead transmission lines with conductor cables spanning over a few hundred meters are highly
sensitive to the action of wind. Particularly wind acting on the cables signifies a major load on the
suspension towers. In order to identify critical loading parameters and the load-response
mechanism of those structures, measurements are carried out along a high voltage overhead
transmission line capturing the acting wind field as well as the structural response of the cables. A
finite element model of the structure is built and used to simulate the system's response. A method
is presented which allows generating a complete wind field for all the models nodes
incorporating measured wind velocities and estimated parameters of the acting wind. The full
scale measurements of both action and reaction will be compared to the numerical results.