Filtern
Dokumenttyp
Sprache
- Englisch (4)
Referierte Publikation
- ja (4) (entfernen)
Schlagworte
- Residual strength (3)
- Sample testing (2)
- Slow burst test (2)
- Anderson-Darlington-test (1)
- Composite cylinders (1)
- Composite pressure cylinders (1)
- Cycle fatigue (1)
- Degradation (1)
- Destructive testing (1)
- Distribution function (1)
Organisationseinheit der BAM
The test data for static burst strength and load cycle fatigue strength of pressure vessels can often be well described by Gaussian normal or Weibull distribution functions. There are various approaches which can be used to determine the parameters of the Weibull distribution function; however, the performance of these methods is uncertain. In this study, six methods are evaluated by using the criterion of OSL (observed significance level) from Anderson-Darling (AD) goodness of Fit (GoF), These are: a) the norm-log based method, b) least squares regression, c) weighted least squares regression, d) a linear approach based on good linear unbiased estimators, e) maximum likelihood estimation and f) method of moments estimation. In addition, various approaches of ranking function are considered. The results show that there are no outperforming methods which can be identified clearly, primarily due to the limitation of the small sample size of the test data used for Weibull analysis. This randomness resulting from the sampling is further investigated by using Monte Carlo simulations, concluding that the sample size of the experimental data is more crucial than the exact method used to derive Weibull parameters. Finally, a recommendation is made to consider the uncertainties of the limitations due to the small size for pressure vessel testing and also for general material testing.
Faserverbundwerkstoffe (Komposite) zeigen außergewöhnliche Veränderungen ihrer Eigenschaften in Abhängigkeit von der Betriebsdauer. Daraus leitet sich auch die Notwendigkeit ab, eine Methode zu finden, die in der Lage ist, Festigkeiten und Restfestigkeiten von Komposit-Druckbehältern zu ermitteln. Dies kann mittels Lastwechselprüfung oder in anderen Fällen vorzugsweise mittels der langsamen Berstprüfung erfolgen. Für eine aussagekräftige Beschreibung der Festigkeit bedürfen die Ergebnisse beider Prüfverfahren einer statistischen Auswertung. Aber insbesondere die statistische Auswertung der berstbezogenen Festigkeitseigenschaften unterliegt neben der Frage der Stichprobengröße einer großen Unsicherheit mit enormen Folgen. Dies ist die Frage, welche Verteilungsfunktion der Streuung der Festigkeitseigenschaft konservativ zugrundegelegt werden darf. So ist zu untersuchen, ob die Gaußsche Normalverteilung (NV) die wahre Verteilung richtig beschreibt. Es könnten aber auch andere Funktionen, wie z. B. die Weibull-Verteilung notwendig sein, um eine Überschätzung der Überlebenswahrscheinlichkeit bzw. Zuverlässigkeit in dem interessanten Bereich von einem Ausfall pro 104 bis 108 Druckbehältern zu vermeiden.
Slow burst testing of samples as a method for quantification of composite cylinder degradation
(2014)
The current practise to focus periodic retesting of composite cylinders primarily on the hydraulic pressure test has to be evaluated as critical. The test itself always causes a certain amount of micro damage to the cylinders but does not necessarily deliver sufficient and evaluable information. Thus BAM Federal Institute of Materials Research and Testing (Germany) moves the focal point to a new approach for validation of composite cylinders, based on destructive sample tests parallel to operation. Statistical assessment of results of these destructive tests is employed for the estimation of remaining safe service life, based on reliability demands. The estimated service life is also used for the determination of re-test periods of the examined population of composite cylinders.
An essential aspect of this approach is the validation of current residual strength and its prediction at any point of service life. In cases of gas cylinders with very high cycle strength, residual strength cannot be quantified statistically by means of hydraulic load cycles. As a replacement, creep tests or burst tests may be employed. BAM suggests the 'slow burst test SBT' as a combination of these two test procedures. This is a compromise between the practicability of the (conventional) burst test and the practical relevance of sustained loads during service, to be tested in creep rupture tests. In this paper, a variety of 99 burst results of a cylinder design type used for breathing apparatus (CFRP with PE-liner) is evaluated. The influence of test procedure parameters and nature and intensity of artificial ageing on the test sample strength are analysed statistically. This leads to an evaluation of different procedures of artificial ageing and the recommendation to substitute conventional burst tests by slow burst tests for the assessment of composite pressure receptacles.
There is evidence that composite materials degrade under static loads. Consequently there is no way to design composite gas cylinders for unlimited service life. Yet this fact is not reflected by design standards for composite receptacles approved for the transport of dangerous goods or for stationary application. Unnecessary cost and weight result from this.
Due to the degradation aspects of composites it is necessary to provide appropriate retesting procedures, which allow rejection of used vessels as is common practice for metallic receptacles. The current procedure of hydraulic tests appears to be an expensive procedure with serious doubts regarding its usefulness for composite cylinders.
Consequently, an efficient method is needed, which allows limiting the life time to its safe maximum. It is thus recommended to combine retesting with the assessment of residual life time. Since relevant non-destructive methods are not yet sufficiently matured and standardized enough, a concept featuring destructive tests on composite cylinders parallel to operation should be considered. An alternative concept introduced here, proposes to substitute the hydraulic testing of 100% of a population by a probabilistic evaluation of destructive tests on samples parallel to operation. Intensified pre-fill inspections should be an additional component of such a concept.