Filtern
Dokumenttyp
- Zeitschriftenartikel (7)
- Vortrag (3)
Sprache
- Englisch (10)
Schlagworte
- Slow burst test (10) (entfernen)
Eingeladener Vortrag
- nein (3)
Faserverbundwerkstoffe (Komposite) zeigen außergewöhnliche Veränderungen ihrer Eigenschaften in Abhängigkeit von der Betriebsdauer. Daraus leitet sich auch die Notwendigkeit ab, eine Methode zu finden, die in der Lage ist, Festigkeiten und Restfestigkeiten von Komposit-Druckbehältern zu ermitteln. Dies kann mittels Lastwechselprüfung oder in anderen Fällen vorzugsweise mittels der langsamen Berstprüfung erfolgen. Für eine aussagekräftige Beschreibung der Festigkeit bedürfen die Ergebnisse beider Prüfverfahren einer statistischen Auswertung. Aber insbesondere die statistische Auswertung der berstbezogenen Festigkeitseigenschaften unterliegt neben der Frage der Stichprobengröße einer großen Unsicherheit mit enormen Folgen. Dies ist die Frage, welche Verteilungsfunktion der Streuung der Festigkeitseigenschaft konservativ zugrundegelegt werden darf. So ist zu untersuchen, ob die Gaußsche Normalverteilung (NV) die wahre Verteilung richtig beschreibt. Es könnten aber auch andere Funktionen, wie z. B. die Weibull-Verteilung notwendig sein, um eine Überschätzung der Überlebenswahrscheinlichkeit bzw. Zuverlässigkeit in dem interessanten Bereich von einem Ausfall pro 104 bis 108 Druckbehältern zu vermeiden.
Slow burst testing of samples as a method for quantification of composite cylinder degradation
(2014)
The current practise to focus periodic retesting of composite cylinders primarily on the hydraulic pressure test has to be evaluated as critical. The test itself always causes a certain amount of micro damage to the cylinders but does not necessarily deliver sufficient and evaluable information. Thus BAM Federal Institute of Materials Research and Testing (Germany) moves the focal point to a new approach for validation of composite cylinders, based on destructive sample tests parallel to operation. Statistical assessment of results of these destructive tests is employed for the estimation of remaining safe service life, based on reliability demands. The estimated service life is also used for the determination of re-test periods of the examined population of composite cylinders.
An essential aspect of this approach is the validation of current residual strength and its prediction at any point of service life. In cases of gas cylinders with very high cycle strength, residual strength cannot be quantified statistically by means of hydraulic load cycles. As a replacement, creep tests or burst tests may be employed. BAM suggests the 'slow burst test SBT' as a combination of these two test procedures. This is a compromise between the practicability of the (conventional) burst test and the practical relevance of sustained loads during service, to be tested in creep rupture tests. In this paper, a variety of 99 burst results of a cylinder design type used for breathing apparatus (CFRP with PE-liner) is evaluated. The influence of test procedure parameters and nature and intensity of artificial ageing on the test sample strength are analysed statistically. This leads to an evaluation of different procedures of artificial ageing and the recommendation to substitute conventional burst tests by slow burst tests for the assessment of composite pressure receptacles.
Gas cylinders made from composite materials receive growing popularity in applications where light weight is of advantage. At the same time manufacturers are interested in cutting cost and weight through material reduction for better acceptance of a product, e.g. H2-vehicles. This requires a better understanding of safety relevant properties.
The safety determination of current standards is mainly based on the minimum burst pressure of a few specimens. Various research projects were conducted aiming at reducing minimum burst pressure requirements without compromising safety. No satisfying results were found. While looking at reliability aspects it could be concluded, that the minimum burst pressure of unused specimens is not a satisfying criterion for safety during service life.
This paper introduces first ideas for a method to determine one aspect of reliability of composite gas cylinders, employing probabilistic analysis of burst pressures of a sample of specimens. This can create potential for saving material cost while granting a higher safety level than the current method. Additionally, degradation over service time can be assessed.
Applications by fire brigades expose the composite cylinders to harsh temperature and handling conditions. Standards have been used for certifying composite cylinders, which are designed for transport of dangerous goods and do not reflect service conditions specific to fire brigades. In this paper, the residual safety of a design type (fully wrapped with aluminum and carbon fiber composite) at the end of their service life of 15 yrs is analyzed. One sample underwent hydraulic load cycle (LC) tests, another conventional burst tests, and the third slow burst tests (SBTs). The statistical evaluation and the handling of an unexpected high amount of early failures are shown.
Developers interested in high pressure storage of hydrogen for mobile use increasingly rely on composite cylinders for onboard storage or transport of dangerous goods. Thus, composite materials and systems deserve special consideration. History gives interesting background information important to the understanding of the current situation as to regulations, codes and standards.
Based on this review, origins of different regulations for the storage of hydrogen as dangerous good and as propellant for vehicles will be examined. Both categories started out using steel and sometimes aluminium as cylinder material. With composite materials becoming more common, a new problem emerged: vital input for regulations on composite pressure systems was initially derived from decades of experience with steel cylinders. As a result, both regulatory fields suffer somewhat from this common basis. Only recent developments regarding requirements for composite cylinders have begun to go more and more separate ways. Thus these differences lead to some shortcomings in regulation with respect to composite storage systems.
In principle, in spite of separate development, these deficits are in both applications very much the same: there are uncertainties in the prediction of safe service life, in retesting procedures of composite cylinders and in their intervals. Hence, different aspects of uncertainties and relevant approaches to solutions will be explained.
Gas cylinders made of composite materials receive growing popularity in light-weight applications. Current standards are mostly based on safety determination relying on minimum amounts of endured load cycles and a minimum burst pressure of a small number of specimens. This paper investigates the possibilities of a probabilistic strength assessment for safety improvements as well as cost and weight savings. The probabilistic assessment is based on destructive testing of small sized samples. The influence of sample size on uncertainty of the assessment is analysed. Furthermore, methods for the assessment of in-service ageing (degradation) are discussed and displayed in performance charts.
Hydraulic pressure testing of composite gas cylinders damages the cylinders, but provides very limited information. For this reason, the Federal Institute of Materials Research and Testing (BAM) demands the assessment of the safety of design types for retest periods of more than three years by employing destructive testing of small samples.
This gives insight in properties not quantified by current standards.
Depending on the cycle fatigue behaviour of the individual design type either cycle tests or slow burst tests are employed. In this paper methods are introduced for a statistical assessment of sample results of both test methods. This includes gathering the average and load cycle burst strength, and the scatter of a sample as well as analysing and plotting them as a pair of values. Each pair of values representing a sample can be assessed approximately regarding its survival rate in service, if the introduced performance charts are employed.
This presentation provides the main issue of a probabilistic based safety assessment.
It shows the differences in terms of survival rate between some current deterministic standards and the probabilistic approach.
It deals with three test procedures: slow burst test, cycle test and fire engulfment test.
The application range of CPV (composite pressure vessels)
is multifaceted. But also the failure forms and the spectrum of measurement methods is manifold. On various, at BAM observed effects, it is shown why the micromechanical analysis of the composites is of such great interest for the prediction of aging effects of CPVs.