Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (10)
- Beitrag zu einem Sammelband (10)
- Beitrag zu einem Tagungsband (5)
- Buchkapitel (3)
- Vortrag (1)
Sprache
- Englisch (29)
Schlagworte
- Concrete (29) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
Today's civil engineering NDT needs are for quantitative, fast to apply and easy to interpret methods. They are required on site both for evaluation of existing structures/infrastructure and for quality control in new construction. With this purpose, BAM has carried out in-situ feasibility studies, using radar, impact-echo and ultrasonic-echo methods. Two examples are given of their combined application on different railway slab–track constructions, using high frequency radar, scanning impact-echo and ultrasonic array methods. The aim was to evaluate limitations and advantages, comparability and complementarity of these methods. The on-site measurements demonstrated the possibility to investigate, with good accuracy via NDT, the bonding conditions between sleepers and slab, to locate voids and measure layer thickness. The acoustic and electromagnetic methods used, were found to be complementary.
The application of impulse radar for structural investigation of concrete elements has been increased during the last years related to technical developments, i. e. of high frequency antennas. In this paper, case studies will be presented related to the location of reinforcing bars, tendon ducts and repaired concrete areas in concrete bridges, anchors and dowels in concrete highways and delaminations of layered structures as they are used for non-ballasted railway tracks. It is shown that impulse radar can be applied in case of regular inspection and for searching the cause of damages but also for quality assessment in civil engineering.
Active infrared thermography in civil engineering - quantitative analysis by numerical simulation
(2003)
The cooling-down process of building structures after heating-up with an external radiation source was analysed to detect voids inside and below the surface. Quantitative results of concrete test specimen containing voids with different sizes at various depths will be presented here. The experimental results were compared to numerical simulations performed with a Finite Difference program developed at BAM.
New thermography systems enable the application of active investigation techniques, i.e. the observation of the cooling down process after heating the surface of a structure under investigation. Defects like voids in concrete having a different thermal diffusivity in comparison to the bulk material are visualised by different surface temperatures. The differences between temperature transient curves above sound regions and above inhomogeneities are expected to include information about the defect parameters.
Experimental investigations with impulse thermography and radar on a concrete test specimen containing voids were analysed. Radar was used to determine the depth of the voids. The influence of size and depth of the voids on the temperature transient curves was studied for different heating times. The transient curves were also fitted with a simple semi-empirical model.
The structural safety, durability and performance of the infrastructure is of primary interest in every country. An efficient system for early and regular structural assessment as well as for quality assurance during and after the construction of new structures and of reconstruction processes is urgently required. At BAM, NDT methods to be applied in civil engineering are developed and their application improved. From the experience of on-site assessments, quality assurance systems and methodologies for regular inspections are elaborated. This work is mainly performed in the frame of externally funded research projects.
Impulse-thermography has been established as a fast and reliable tool in many areas of non-destructive testing. In recent years several investigations have been done to apply active thermography to civil engineering. For quantitative investigations in this area of application, finite difference calculations have been performed for systematic studies on the influence of environmental conditions, heating power and time, defect depth and size and thermal properties of the bulk material (concrete). The comparison of simulated and experimental data enables the quantitative analysis of defects.