Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (10)
- Beitrag zu einem Sammelband (10)
- Beitrag zu einem Tagungsband (5)
- Buchkapitel (3)
- Vortrag (1)
Sprache
- Englisch (29)
Schlagworte
- Concrete (29) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
The applicability of pulse phase thermography (PPT) for the investigation of structures is studied systematically on concrete test specimens and on a plastered sandstone column. In the test specimens, voids and delaminations are implemented in different depths and with different sizes, modelling real voids, honeycombing and debonding. Delaminations of plaster in concrete and masonry and behind tiles on concrete are investigated. PPT is based on the frequency analysis of the cooling down process of actively heated surfaces. Therefore, it is contactless and thus completely non-destructive (if overheating of the surface is prevented), fast and allows the inspection of large surface areas. The interpretation of amplitude and phase images gives semi-quantitative information about the observed defects. The phase images provide a deeper probing up to 1015 cm in relation to the interpretation of the thermograms and to the amplitude images. In addition, the influence of surface inhomogeneities and non-uniform heating is reduced.
Non-destructive testing (NDT) of concrete structures plays an increasing role in civil engineering. This paper presents the results of systematic measurements carried out in the laboratory at BAM and on-site at several bridges using reconstructed and fused radar and ultrasonic echo data sets. For investigating the influence of concrete mixture, radar and ultrasonic measurements were performed at test specimens consisting of concrete mixtures with different pore content and distribution as well as with steel fibres. Further, it is demonstrated how the fusion of data sets recorded with different methods at the same structure (here: concrete bridges) enhances the information content in the fused data set. Different approaches for data fusion algorithms are discussed. The results of these investigations show the high potential of reconstruction and data fusion for the improvement and simplification of the interpretability of large data sets measured with impulse-echo methods. The presented results are based on the research project FOR384 funded by the DFG (Deutsche Forschungsgemeinschaft).
Impulse-thermography has been established as a fast and reliable tool in many areas of non-destructive testing. In recent years several investigations have been done to apply active thermography to civil engineering. For quantitative investigations in this area of application, finite difference calculations have been performed for systematic studies on the influence of environmental conditions, heating power and time, defect depth and size and thermal properties of the bulk material (concrete). The comparison of simulated and experimental data enables the quantitative analysis of defects.
Impulse thermography is an active method for quantitative investigations of the near
surface region of various structures. It has recently been applied and optimized to applications in civil
engineering. For quantitative analysis of data recorded on the building site, the problems are manifold.
Here, the influence of the different surface properties on the detection and characterization of voids
and honeycombing simulated by polystyrene cubes and cubes prepared of porous concrete are
demonstrated.
Influence of concret properties on the calibration of radar, ultrasonics and active thermography
(2008)
The structural safety, durability and performance of the infrastructure is of primary interest in every country. An efficient system for early and regular structural assessment as well as for quality assurance during and after the construction of new structures and of reconstruction processes is urgently required. At BAM, NDT methods to be applied in civil engineering are developed and their application improved. From the experience of on-site assessments, quality assurance systems and methodologies for regular inspections are elaborated. This work is mainly performed in the frame of externally funded research projects.
Monitoring of cracks in historic concrete structures using optical, thermal and acoustical methods
(2015)
Cracks are a major issue in the field of cultural heritage. In order to evaluate the significance of a crack, a long term monitoring of the damaged region is required. However, there is a lack of easy to operate tools for such monitoring measures. Therefore, new or existing methods for other applications have to be optimised for cultural heritage investigation. The paper describes the application of such crack observation methods on a historic concrete sculpture. Beside conventional methods, like mapping by hand and ultrasonic depth profiling, a novel tracking system is presented. Furthermore, the suitability of active thermography for the investigation of cracks was investigated. The results show promising prospects for these non-destructive techniques.