Filtern
Dokumenttyp
- Zeitschriftenartikel (21) (entfernen)
Sprache
- Englisch (10)
- Deutsch (9)
- Mehrsprachig (2)
Schlagworte
- Beton (4)
- Concrete (3)
- High resolution (3)
- SyXRD (3)
- Cement hydration (2)
- Cleaning efficacy (2)
- Durability (2)
- Graffiti (2)
- Hydrophobicity (2)
- In-situ (2)
Höchst dynamische Hydratationsprozesse in den ersten Sekunden bei der Entstehung eines Bauwerkes lassen sich mithilfe von Synchrotron-Röntgenbeugung mit einer sehr hohen Zeitauflösung nachverfolgen. Der Schwerpunkt lag dabei auf der Beeinflussung der Bildung erster kristalliner Hydratationsprodukte während des Frühstadiums der Zementhydratation.
Setting cement: Highly dynamic hydration processes that occur during the first seconds of cement hydration were studied by time-resolved synchrotron X-ray diffraction. Polycarboxylate ether additives were found to influence the formation of the initial crystalline hydration products on a molecular level.
Deciphering the sulfate attack of cementitious materials by high-resolution micro-x-ray diffraction
(2011)
The durability of cementitious materials depends, among others, on their resistance against chemical attack during the service life of a building. Here, we present an approach to analyze changes in the phase composition due to chemical attack in the form of sulfate ingress within the microstructure. Micro-X-ray (µX-ray) diffraction using synchrotron radiation in Debye–Scherrer (transmission) geometry allowed a spatial resolution of 10 µm. Phase transformations in the wake of damaging processes were observed in a detailed high-resolution imaging study. In comparison, samples containing supplementary cementitious materials were investigated and used to reconstruct the influence of different degeneration processes in detail. Additionally, reaction fronts within the bulk were localized by micro-X-ray fluorescence analysis. The experimental setup provided the possibility for analyzing the phase assemblage of a given sample without destroying the microstructure. The specimens for phase analysis are thick sections of the primary material and can be used for further microscopic analysis of the microstructure and microchemistry, e.g., scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDX) or Raman spectroscopy.
Spatially resolved analysis of complex multi-phase systems can be validated through different analytical methods. This study compares investigations by scanning electron microscopy coupled with energy dispersive X-ray fluorescence analysis and high resolution X-ray diffraction. The studied sulfate attacked cement paste containing fly ashes consists of different interacting crystalline and amorphous phases. The complementary methods revealed in detail changes in phase composition due to the chemical attack. The advantages and disadvantages of both methods are discussed and suggestions are given for combining them with additional methods to maximize the information content.
Der Beitrag gibt einen Überblick über die Eigenschaften industriell hergestellter Bauprodukte aus Lehm für den Mauerwerksbau. Die Qualität der industriellen Fertigung dieser Produktgruppe hat inzwischen einen Stand erreicht, der vergleichbar mit dem anderer Bauprodukte ist. Lehm-Putzmörtel gibt es als Universalputze für ein- oder mehrlagige Anwendung oder in Form von Unter-, Ober- oder Feinputzen. Lehmsteine werden in verschiedenen Größen und mit Lochung angeboten. Die mechanischen Eigenschaften verschiedener Lehmsteinsorten sind geprägt durch Druckfestigkeiten bis 11 N/mm2, mit üblichen Werten bei 2 bis 5 N/mm2. Ein kritischer Punkt ist die Abhängigkeit der Festigkeitseigenschaften der Lehmsteine von der Materialfeuchte. Die vorliegenden Untersuchungen haben jedoch gezeigt, dass in einem Luftfeuchtebereich von 40 bis 70 % RLF die Druckfestigkeit von Lehmsteinen verhältnismäßig konstant ist. Mauerwerk, errichtet mit Lehmsteinen und Lehm-Mauermörtel, zeigt ähnliche Druckfestigkeiten und E-Module wie Mauerwerk, das mit Porenbetonsteinen errichtet wurde. Infolge einer geringeren Haftscherfestigkeit zwischen Lehmmörtel und Lehmstein ist die Schubfestigkeit von Lehmsteinmauerwerk vergleichsweise niedrig.-------------------------------------------------------------------------------------------------------------------------------------
Properties of industrially produced earthen building products for masonry and behaviour of earth block masonry. The contribution gives an overview of the properties of industrially produced earthen building products for masonry. In the meantime the quality of the industrial production of this group of building materials reached a level similar to that of other products for construction. Earth plasters exist as plasters for universal, one or multi layer applications or as lower, upper or finish plasters. Earth blocks are provided in different sizes and with different perforations. The mechanical properties of different earth block types are signified by compressive strength of up to 11 N/mm2 but are typically in a range between 2 and 5 N/mm2. A critical point is the correlation of the strength of earthen materials with their moisture content. Results from earth blocks showed that in a relative humidity window between 40 and 70 % rh the compressive strength of earth blocks is fairly constant. Masonry made from earth block and earth mortar exhibited compressive strength and elastic modules similar to masonry made with aerated autoclaved concrete blocks. The shear strength of earth block masonry, however, is fairly low, due to the weak bond between earth block and earth mortar.