Filtern
Dokumenttyp
- Zeitschriftenartikel (1)
- Vortrag (1)
Sprache
- Englisch (2)
Schlagworte
- Compressive strength (1)
- Dispersion (1)
- Earth block masonry (EBM) (1)
- FEM (1)
- Partial safety factor (1)
- Reliability (1)
- Waves (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
The main aim of the research was the development of a first valid database for material parameters of earth block masonry (EBM) with particular regard to statistical characteristics. A solid database is needed for the determination of the materials partial safety factor. Therefore, compressive strength tests were carried out with two types of earth blocks and two types of prefabricated earth mortar.
The evaluation has shown that the mean variation of the compressive strength was remarkably less than expected, which indicates high quality standards of the components earth block and mortar with regard to industrial production. Using the reliability method, a partial safety factor for EBM subjected to compression was determined on the basis of these test results. The findings have shown that a common calculation method for EBM based on partial safety factors following the valid masonry construction standard is feasible.
Elastic waves in inhomogeneous meshes avoiding numerical artifacts
Elastic waves in solids resulting from damage processes, e.g. microcracking are used to monitor the integrity of structures. The numerical modelling of these acoustic Emission processes is hindered by the different scales involved. Crack opening is a fast process and the size of the damaged zone is small, leading to small time steps and fine meshes in a numerical finite element simulation. On the other hand the relevant wave Propagation takes place on a much larger spatial scale, e.g covering the distance between Emission source and sensor.
To avoid numerical oscillations, the mesh size at the emission source has to be coupled to its time scale. Using higher order spectral elements can be beneficial with respect to the needed number of degrees of freedom. To make the computation of an acoustic emission process feasible one is lead to coarsening the mesh for larger distances to the source. Solution components with a higher frequency will be reflected at mesh density steps. The mesh coarsening has to be done in a way to avoid or minimize this kind of reflections.
To get more insight into the propagation characteristics of the numerical solution, dispersion curves are calculated for different element types assuming a structured mesh with constant element size. Coupling two meshes with different mesh densities will then lead to frequency dependent reflections at the boundary similar to the coupling of different materials.
The starting mesh density is dictated by the acoustic emission source time scale. The largest allowable mesh size needs to resolve the components of propagating signal with the highest frequency, smallest wavelength which is given by the bandwidth of the sensor.
Still coarser meshes may be used when high frequency components are propagated by a different method.