Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (38)
- Sonstiges (4)
- Forschungsbericht (1)
Schlagworte
- NEXAFS (43) (entfernen)
Organisationseinheit der BAM
NEXAFS analysis of a plasma treated, partially crystalline poly(ehtylene terephtalate) surface
(1996)
Self-assembled octadecyltrichlorosilane (CH3(CH2)17SiCl3, OTS) films were deposited on an oxidized silicon wafer. They were carefully exposed to a low-pressure oxygen direct current (dc) plasma and/or Cr vapor. Subsequently, they were characterized by X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and atomic force microscopy. Detailed information on the oxygen functionalization and the molecular conformation of the OTS films was obtained. The main result was that functionalization conditions can be found where the order of the film remains almost unaffected. Similarly, Cr evaporation of pure OTS films revealed only slight effects on the order in the film. Cr evaporation of an ordered but functionalized OTS film immediately changes its state toward a fully isotropic one. In the course of interaction, oxygen sites at the surface of the functionalized OTS film are reduced whereas Cr becomes oxidized. A redox reaction scheme is proposed for this interfacial reaction. Finally, it is concluded that the given study should be of importance for advanced plasma processing of polyolefins.
Plasma-deposited polymer films were prepared from organic molecules and investigated using near edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) for aging effects after exposure to air. Results from the investigation of homopolymers are summarized. Primarily the effect of the deposition parameters duty cycle and power are dealt with. The effect of the deposition parameter pressure is briefly discussed. An example to show the effect of feed gas composition on the aging of plasma polymerized ethylene/allyl alcohol and styrene/allyl alcohol copolymer is also given. In general, change in content of unsaturated or aromatic species, change in concentration of monomer functionality, and change in the oxygen content was observed in the plasma polymerized films on aging.
XPS and NEXAFS spectroscopy were used for the chemical characterization of pulsed plasma-deposited ethylene films before and after exposure to ambient air. The influence of external plasma parameters on the spectroscopic results was investigated. Information on the chemical character of the plasma-polymerized films, such as the regularity of the primary structure, the amount of long-living radicals, and branching or cross-linking or both was derived from this data. Irregularity and radical concentration for post-plasma reactions of the plasma-deposited films increased with the duty cycle or power. A decreased level of monomer fragmentation and, consequently, an increase in regularity is partially concluded from the experimental data when the monomer pressure is increased. The concentration of surface radicals available for post-plasma reactions also increased with monomer pressure. The correlation found between the degree of the post-plasma oxygen incorporation and the variation of the various external parameters agreed with earlier ToF-SSIMS findings.
The formation of plasma-deposited materials made from organic molecules is a technologically attractive way to obtain films with unique properties, e.g. adhesion, wettability, conductivity or selected chemical functionalization. A detailed chemical characterization of these films is a great challenge for the analyst because of the co-existence of a large number of chemical species in plasma-deposited films. We investigated these types of organic films using photoelectron spectroscopy for chemical analysis (ESCA, XPS), near edge X-ray absorption fine structure (NEXAFS) spectroscopy at synchrotron radiation source BESSY II and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). A dedicated plasma preparation chamber was designed and added to the main analysis chamber of the respective spectrometers. This approach offers the possibility of studying plasma-deposited films without exposure to air before analysis (often called in-situ analysis) and the influence of post-plasma reactions, i.e. the ageing process. The present investigations are aimed at finding correlations between basic chemical properties of the deposited films and the plasma deposition parameters, e.g. duty cycle in pulsed plasmas and the power of discharge.