Filtern
Erscheinungsjahr
Dokumenttyp
Referierte Publikation
- nein (19) (entfernen)
Schlagworte
- Creep (5)
- Superalloys (5)
- Porosity (3)
- CMSX-4 (2)
- Dendritic structure (2)
- Diffusion (2)
- Interface (2)
- Microstructure (2)
- Misfit (2)
- Ni-base superalloy (2)
Eingeladener Vortrag
- nein (1)
Changes in the structure of single-crystal (SC) superalloy SRR99 during creep at 980 °C and 200 MPa were investigated. Geometrical parameters of the y/y'-microstructure, y/y'-misfit, stresses in the phases and local misorientation of the structure were determined at defined points of the dendritic structure by use of X-ray diffraction (XRD), wavelength dispersive X-ray spectroscopy (WDXS), scanning (SEM) and transmission (TEM) electron microscopy. Correlation of the microstructural period and local misorientation of the structure with creep strain were found.
Optical and scanning electron microscopy, as well as electron microprobe analysis and electron backscatter diffraction, have been used to study diffusion processes that occur in a diffusion pair that consistsof a single-crystal CMSX-10 nickel-base superalloy and polycrystalline nickel, at temperatures of 1050–1250°C. It has been found that, in this system, the distributions of γ-stabilizing elements (Cr, Co, W, and Re) are described by the Boltzmann solution for diffusion between two semiinfinite plates of a binary alloy. The processing of these distributions has shown that the diffusion coefficients of Cr, Co, W, and Re in the multicomponent system are close to those in binary alloys of these elements with Ni. The diffusion redistribution of the elements leads to the dissolution of the γ′ phase in the nickel-base superalloy, growth of nickel grains toward the superalloy constituent of the diffusion pair, and the formation of porosity on both sides of the migrating interface, which is determined from a crystal misorientation of the alloy single crystal and nickel grains.
Electron microscopy investigation of the structure of a compact extruded from nanopowder of nickel
(2007)
Pore annihilation was investigated in the single-crystal nickel-base superalloy CMSX-4. HIP tests at 1288 °C/103 MPa were interrupted at different times, then the specimens were investigated by TEM, metallography and density measurements. The kinetics of pore annihilation was determined. The pore closure mechanism was identified as plastic deformation on the octahedral slip systems. A model describing the kinetics of pore closure has been developed on the base of crystal plasticity and large strain theory. Mechanical tests with the superalloy CMSX-4 and the Ru-containing superalloy VGM4 showed, that HIP significantly increases the fatigue life at low temperatures but has no effect on creep strength.