Filtern
Dokumenttyp
Sprache
- Englisch (9)
Schlagworte
- Distributed strain sensor (9) (entfernen)
Organisationseinheit der BAM
Application results of a dynamic technique for simultaneous measurement of length changes and optical power changes between multiple reflection points in an optical fiber are presented. The technique is based on incoherent optical frequency domain reflectometry (I-OFDR) and allows for measuring for example length changes and optical power changes quasi-distributed at repetition rates up to 2 kHz. Precise measurement with length change resolutions in the µm-range can be conducted using standard single-mode or multi-mode fibers. Previous results of dynamic refractive index change measurement and the use of polymer optical fibers for high-strain measurement are concluded and possible sources of measurement inaccuracies are discussed. Field test results with sensors installed on a masonry building during a seismic shake test are presented. The versatility and simplicity of this technique makes it potentially interesting for application in the structural health monitoring sector and chemical process control.
Recently, we have proposed, to our knowledge for
the first time, to use perfluorinated graded-index polymer
optical fiber (POF) for distributed measurement of strain.
Thanks to their low attenuation and low modal dispersion
compared to standard-POF, this fiber type allows to extend the
measurement length to more than 500 meters at increased
spatial resolution. In this paper, two mechanisms for strain
sensing are introduced. As in standard PMMA POF, strain in the
fiber can be detected by evaluating the local backscatter
increase occurring at strained fiber sections. Further, we
propose, to our knowledge for the first time, a true distributed
length change measurement in POF using cross-correlation
analysis of the fibers characteristic backscatter signature.
Using this technique, it is possible to measure relative
displacement between different fiber sections avoiding signal
fading failures that are inherent in other measurement
principles. Cross-sensitivities to the sensor signal, as fiber
bends and temperature, are investigated and quantified.
Sensing characteristics of standard polymer
optical fibers (POF) are further studied using the optical time
domain reflectometry (OTDR) technique. The level of the
backscattering inside POF, which highly increases at locations
where strain is applied to the fiber, is further investigated with
respect to spectral behavior, strain rate and span of time from
the stretching event. An algorithem to overcome the problem of
the decrease of spatial resolution as a result of pulse
broadening due to modal disperion, is proposed. The research
is carried out on the background of the development of a new
strain sensor that is integrated in technical textiles.
We present the latest advances in distributed strain measurement in perfluorinated polymer optical fibres (POFs) using backscatter techniques. Compared to previously introduced poly(methyl methacrylate) POFs, the measurement length can be extended to more than 500 m at improved spatial resolution of a few centimetres. It is shown that strain in a perfluorinated POF can be measured up to 100%. In parallel to these investigations, the incoherent optical frequency domain reflectometry (OFDR) technique is introduced to detect strained fibre sections and to measure distributed length change along the fibre with sub-millimetre resolution by applying a cross-correlation algorithm to the backscatter signal. The overall superior performance of the OFDR technique compared to the optical time domain reflectometry in terms of accuracy, dynamic range, spatial resolution and measurement speed is presented. The proposed sensor system is a promising technique for use in structural health monitoring applications where the precise detection of high strain is required.
POF sensors integrated in technical textiles for monitoring of earthwork structures and masonry
(2009)
Polymer optical fiber (POF) sensors have the unique ability to measure high strain distributed along the fiber up to 40% using the optical time-domain reflectometry (OTDR) technique. Both, standard PMMA fibers and perfluorinated (PF) graded-index (GI) POF are introduced and evaluated in potential use and applicability. Further, distributed length change measurement based on cross-correlation analysis of the characteristic fiber signature of PF POF is introduced. We conclude the advances in distributed POF strain sensors technology with respect to application in structural health monitoring. Special focus is on the sensor integration into technical textiles for health monitoring of geotechnical structures and masonry structures. Measurement results of sensor-equipped textiles in different model tests are presented, displacement of soil and cracks in retrofitted masonry structures are detected and evaluated.