Filtern
Dokumenttyp
Sprache
- Englisch (13) (entfernen)
Schlagworte
- NDT (5)
- Scanner (5)
- Diagnosis (4)
- Betonflächendiagnose (3)
- Concrete (3)
- Corrosion (3)
- Ultrasound (3)
- ZfP im Bauwesen (3)
- Assessment of concrete structures (2)
- BetoScan (2)
The introduction of an innovative process for non-destructive testing is described in terms of its different phases and how the process is controlled in the Fraunhofer IZFP in order to obtain optimal results. Examples are discussed of applications by IZFP in various important and safety-relevant industrial sectors where the automated inspection systems were introduced. These case studies include the inspection of railway components such as the wheel sets of the German high-speed train and in-line pipe inspection by using intelligent pipeline inspection gauges. Complex inspection systems, both hardware and software, developed in partnership with the Federal Institute for Materials Research and Inspection (BAM), were applied to inspection tasks in civil engineering. Two automated systems based on a robot and on a flexible manipulation are presented. Both systems can be applied to diverse inspection technologies and to the data fusion of various types of non-destructive testing (NDT) data.
For the assessmentand for monitoring of timber structures there are numerous promising methods that enable the quantitative description of the current condition of construction elements or parts of a structure. This concerns material properties like modulus of elasticity, moisture content and density as well as structural properties like dynamic characteristics, localization of inhomogeneities, cracks, and biological attack. During the work in COST Action FP 1101, since 2012 the capability of experimental methods are discussed and compared. This covers electrical and electromagnetic wave methods (resistivity, microwave, Radar, X-Ray), elastic waves (ultrasound, pile testing) and mechanical testing (static and dynamic). Describing and collecting the use of the experimental methods for monitoring purposes was the objective of working group 3 "Monitoring of Timber Structures" of the COST Action. Monitoring capabilities will extend the use of timber structures to further applications in civil engineering. So far, no standard exists but collections of application examples and review papers representing the state of the art. From there needs for further developments regarding monitoring and NDT methods for timber structures can be identified and these are described in this paper.
Control and data acquisition of automated multi-sensor systems - two examples from civil engineering
(2010)
The vast experience with the automated, ultrasonic system for the inspection of hollow railway axles used by Deutsche Bahn shows that much smaller flaws are detectable than required. This results in a number of false calls. False calls lead to unnecessary demounting and disassembling of wheelsets, which generates unnecessary additional costs. In order to adjust the sensitivity of the inspection system to reduce the number of false calls without compromising safety, the capability of the system to detect cracks needs to be comprehensively established. This capability can be quantified by using probability of detection (POD) curves for the system. The multi-parameter POD model makes it possible to include several factors that influence the crack detection in the analysis. The analysis presented in this paper shows that crack position, orientation, depth extension, and shape as well as the geometry of the axle all have influence on the ultrasonic response amplitude. For future work, calculation of the POD using multi-parameter POD model with these parameters is planned.
BETOSCAN - An instrumented mobile robot system for the diagnosis of reinforced concrete floors
(2009)
Infrastructure is subject to continuous ageing. This has given life cycle management of infrastructure an increasing role. Reliable inspection and monitoring tools are therefore an increasing demand. A combination of different non-destructive test methods is often necessary to receive reliable results for material characterization,
flaw detection and the determination of component specific geometry parameters.
Regarding concrete structures thickness measurements are combined with flaw detection and additional information about reinforcement and tendon ducts is required.
Therefore, a multi-sensor measurement approach is necessary with a high degree of automation. Otherwise a time consuming succession of manual measurements has to be performed which would prevent practical applications. A modular control and data acquisition approach is described and the application of two different automated measurement devices is shown. The BetoScan system consists of a self-navigating
mobile robot. The system is especially designed for the investigation of reinforced concrete floors exposed to de-icing salts. The data acquisition of the OSSCAR system a multi-sensor scanner is similar to the robot approach. These different applications are based on a similar kernel allowing the modular use of different contact and noncontact sensors. The described general concept of multi-sensor data acquisition and data analysis presented here is not limited to the field of civil engineering applications.