Filtern
Dokumenttyp
Schlagworte
- Scanner (9)
- BetoScan (7)
- Betonflächendiagnose (7)
- ZfP im Bauwesen (7)
- Radar (5)
- Diagnosis (4)
- NDT (4)
- Zerstörungsfreie Prüfung im Bauwesen (4)
- Corrosion (3)
- Kombination (3)
Eine Vielzahl zerstörungsfreier Prüfverfahren hat in den letzten Jahren Einzug in die Bauwerksuntersuchung gehalten. Um die Aussagekraft der Einzelverfahren zu erhöhen und den wirtschaftlichen Einsatz weiter voranzubringen, lag es nahe, die Verfahren kombiniert auf einer automatisierten Plattform zu montieren. Zu diesem Zweck wurde das BetoScan-System entwickelt. Um weitere Erfahrungen mit dem BetoScan-System zu erhalten, wurde ein langjährig genutztes Parkhaus aus Stahlbeton mit Gussasphaltfahrbahn als Untersuchungsobjekt ausgewählt. Bei der experimentellen Bauwerksuntersuchung wurden die Verfahren Wirbelstrom, Radar, Ultraschall und Mikrowelle zum Einsatz gebracht. Von der Anwendung des Systems und der Auswertung der Ergebnisse wird in diesem Beitrag berichtet.-----------------------------------------------------------------------------------------
In recent years a variety of non-destructive evaluation methods are more and more used for the inspection of constructions. Increasing the information value of inspections and the economic aspects of applications leads to a combination of methods on an automated system. Therefore, the BetoScan robot was developed. Gaining more experience in applications was realized with the inspection of a car park which was unused for several years. The building was made of reinforced concrete with melted asphalt as floor coating. Within the frame of the inspections eddy current, radar, ultrasound and microwaves were used. The application of the BetoScan system and the results are presented in this article.
Control and data acquisition of automated multi-sensor systems - two examples from civil engineering
(2010)
BETOSCAN - An instrumented mobile robot system for the diagnosis of reinforced concrete floors
(2009)
Infrastructure is subject to continuous ageing. This has given life cycle management of infrastructure an increasing role. Reliable inspection and monitoring tools are therefore an increasing demand. A combination of different non-destructive test methods is often necessary to receive reliable results for material characterization,
flaw detection and the determination of component specific geometry parameters.
Regarding concrete structures thickness measurements are combined with flaw detection and additional information about reinforcement and tendon ducts is required.
Therefore, a multi-sensor measurement approach is necessary with a high degree of automation. Otherwise a time consuming succession of manual measurements has to be performed which would prevent practical applications. A modular control and data acquisition approach is described and the application of two different automated measurement devices is shown. The BetoScan system consists of a self-navigating
mobile robot. The system is especially designed for the investigation of reinforced concrete floors exposed to de-icing salts. The data acquisition of the OSSCAR system a multi-sensor scanner is similar to the robot approach. These different applications are based on a similar kernel allowing the modular use of different contact and noncontact sensors. The described general concept of multi-sensor data acquisition and data analysis presented here is not limited to the field of civil engineering applications.