Filtern
Erscheinungsjahr
- 2014 (11) (entfernen)
Dokumenttyp
- Vortrag (6)
- Beitrag zu einem Tagungsband (4)
- Zeitschriftenartikel (1)
Schlagworte
- Explosion protection (2)
- Nanostäube (2)
- Sicherheitstechnische Kenngrößen (2)
- Brand- und Explosionsschutz (1)
- Dust explosion (1)
- Dust explosion testing (1)
- Exploding wire (1)
- Explosion characteristics (1)
- Ignition (1)
- Ignition source (1)
Eingeladener Vortrag
- nein (6)
Nanotechnologie gilt als die Wachstumsbranche der nächsten Jahrzehnte. Nicht zuletzt ist diese Entwicklung den veränderten Eigenschaften der Materialien im Nanometerbereich zuzuschreiben. Das anders geartete Verhalten solcher Stoffe und die daraus ableitbare Unkenntnis über die Interaktion dieser Materialien mit ihrer Umgebung erfordert zur Risikoabschätzung eine intensive Auseinandersetzung mit der Thematik. Aufgrund von Erfahrungen mit Stäuben mit Partikelgrößen im Mikrometerbereich ist bekannt, dass Stoffe mit abnehmender Partikelgröße kritischer einzustufen sind, da ihre Explosionsheftigkeit und Zündempfindlichkeit durch die Zunahme der reaktiven Oberfläche des Staubs zunimmt. Nachfolgend werden Ergebnisse von Versuchen mit nanoskalig hergestellten Metallstäuben präsentiert. Der Fokus dieser Studie lag darauf, möglichst das kritischste Brand- und Explosionsverhalten solcher Stäube zu erfassen
This paper describes experiences and results of experiments with several metallic dusts within the nanometer range. The nano dusts (aluminium, .iron, zinc, titanium and copper) were tested in a modified experimental Setup for the test apparatus 20-L sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was already introduced in earlier papers by the authors. It was designed to allow the determination of safety characteristics of nano powders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). Furthermore the influence of passivation on explosion behaviour is investigated and additional tests with deposited dust were carried out to describe the burning behaviour of all dusts. For a better characterisation all samples were tested with a simultaneous thermal analysis (STA). To minimise the influence of oxidation all samples were handled at inert conditions until shortly before ignition or start of the test respectively.
This paper describes experiences and results of experiments with several metallic dusts within the nanometer range. The nano dusts (aluminium, iron, zinc, titanium and copper) were tested in a modified experimental setup for the test apparatus 20 L-sphere (also known as 20-L Siwek Chamber), that enables the test samples to be kept under inert atmospheric conditions nearly until ignition. This setup was already introduced in earlier papers by the authors. It was designed to allow the determination of safety characteristics of nano powders under most critical circumstances (e.g. minimisation of the influence of oxidation before the test itself). Furthermore the influence of passivation on explosion behaviour is investigated and additional tests with deposited dust were carried out to describe the burning behaviour of all dusts. For a better characterisation all samples were tested with a simultaneous thermal analysis (STA). To minimise the influence of oxidation all samples were handled at inert conditions until shortly before ignition or start of the test respectively.
Nanotechnologie gilt als die Wachstumsbranche der nächsten Jahrzehnte. Nicht zuletzt ist diese Entwicklung den veränderten Eigenschaften der Materialien im Nanometerbereich zuzuschreiben. Das anders geartete Verhalten solcher Stoffe und die daraus ableitbare Unkenntnis über die Interaktion dieser Materialien mit ihrer Umgebung erfordert zur Risikoabschätzung eine intensive Auseinandersetzung mit der Thematik. Aufgrund von Erfahrungen mit Stäuben mit Partikelgrößen im Mikrometerbereich ist bekannt, dass Stoffe mit abnehmender Partikelgröße kritischer einzustufen sind, da ihre Explosionsheftigkeit und Zündempfindlichkeit durch die Zunahme der reaktiven Oberfläche des Staubs zunimmt. Nachfolgend werden Ergebnisse von Versuchen mit nanoskalig hergestellten Metallstäuben präsentiert. Der Fokus dieser Studie lag darauf, möglichst das kritischste Brand- und Explosionsverhalten solcher Stäube zu erfassen.
Validation of the new ignition source 'exploding wire' for dust explosion testing in the 20-L-sphere
(2014)
The safety characteristics Maximum Explosion Pressure pniB, Maximum Explosion Pressure Rise (dp/dt)™* and Lower Explosion Limit LEL are determined in closed vessels such as the 20-L-sphere according to international Standards. Dust ignition is carried out using pyrotechnical igniters which are defined in the Standards. Due to various disadvantages of pyrotechnical igniters the need for alternative ignition sources arises again and again. Studies at the Federal Institute for Material Research and Testing (BAM) with ignition units which were able to generate ignition energies up to 2000 J showed that the so-called “exploding wire” or “fuse wire“ is suitable as an alternative ignition source. The paper presents further test results for the Validation of the exploding wire for the determination of Pm» and (dp/dt)mx in the 20-L-sphere. The tests were performed with a new ignition unit and improved electrodes which allowed ignition energies up to 10000 J. The paper also analyses propagation of flame and electrical arc on basis of high speed camera recordings. Turbulence measurements with a LDA System in the 20-L-sphere allowed investigation whether the activation of the ignition sources has an influence on the turbulence field generated during dust dispersion and whether the influence differs depending on the ignition source.