The spatial resolution in ultrasonic testing as a wave phenomenon in nature is limited to a
certain fraction of the wavelength, usually defined to be close to the Rayleigh criterion. In case of
complicated reflector surfaces – such as stress corrosion cracking - this limitation prevents an exact
visualization of the defect shape. There exist a few approaches to improve the spatial resolution, whose
reconstruction quality all in common also depend on the achieved signal-to-noise ratio of the raw data. In this
work we present a specific SAFT analysis, in which a high number of different angles of incidence produce a
sufficiently high number of different reflections at the crack edges resulting in an improved SNR. In doing
so, we reconstruct a coherent crack structure. First investigations were made at artificially simulated crack
configurations with different contours and curvatures in flat and cylindrical test blocks. The measurements
results visualized by representative scans – show details of crack design and crack orientation. We also will
present a comparison of the SAFT analysis between modelling and phased array measurements.
Within a know-how transfer project funded by the government conventional ultrasonic
technique was replaced by phased array technique for automated round-bar testing. Instead of
applying a great number of conventional probes to achieve acceptable volume coverage we used
curved linear arrays. The benefits of phased array technique such as programmable skew angles,
beamforming and beam positions, led not only to a significant decrease in inspection time, but also the
number of probes could be substantially reduced . Finally, the testing parameters for a large range of
bar-diameters could be adapted by software control instead of time-consuming mechanical
replacement. The probe-design was carried out by a proprietary modelling program. Both the
theoretical calculations as well as the latter experimental verifications revealed significant advantages
of curved arrays versus the planar types. A radial oriented probe offers perfect adaption to the
cylindrical shape of the specimen allowing wide variations of the sound field. Thus beam direction,
beam size and beam position could be optimized with respect to a minimum of inspection cycles, as
inspections have to be executed in-line during the production. A number of laboratory tests were
carried out on special test components. In order to achieve an optimal performance of the reference
rod we implemented three different types of reference reflectors: (i) flat-bottom-holes with diameters
of 0.8 mm and 1.2 mm, (ii) side-drilled-holes with a diameter of 0.7 mm for the detection of
volumetric flaws, and (iii) notches with a depth of 0.2 mm and 0.5 mm for the detection of surfaceoriented
defects. All laboratory tests were carried out with the COMPAS-XXL inspection system, a
proprietary development of BAM.
Ultrasonic testing of adhesively bonded joints using air-coupled cellular polypropylene transducers
(2014)
In air-coupled ultrasonic testing, the impedance mismatch between the transducer and the air is commonly being solved by adding matching layers to composite transducers. To avoid the difficult technological procedure regarding matching layers, some new piezoelectric materials have been proposed. Most promising are ferroelectrets, which are charged cellular polymers, having ferroelectric and consequently piezoelectric properties. In particular, the extreme softness of cellular polypropylene (cPP) leads to a high piezoelectric constant and to a good impedance match with the air, making matching layers redundant. Its elasticity modulus below 1 MPa causes an additional effect not observed with common piezoelectric materials: that is the electrostrictive effect, here defined as the thickness change due to the attractive force between the transducer electrodes. This effect exceeds the piezoelectric effect at excitation voltages over 1 kV. The extreme softness of cPP leads also to high flexibility, enabling easy focusing by bending the transducer.
We have developed air-coupled ultrasonic transducers based on cPP. This includes the electrical matching networks for the transmitter and for the receiver. The transmitter is excited with voltages up to 2.5 kV, so that the electrostrictive effect dominates, leading to sound pressure around 145dB at the transducer surface. These transducers have been applied for testing carbon-fiber-reinforced polymer plates, adhesive joints and other composite structures. Here we report about ultrasonic transmission of two types of adhesive joints. The first one is multi-layer aluminium components with some artificial disbonds, which are common in aerospace industry, and the second one is an aluminium-steel joint with polyurethane adhesive, which is used in automotive industry.
Quantitative NDE methods play a key role when it comes to inspect components,
which requires high operational safety. UT-SAFT is one of the well-known reconstruction tools,
which provides information about the defect size. In this work we studied the use of phased array
technique in combination with the SAFT algorithm to inspect power plant components. As a first
example we inspected a real-sized mock-up model representing a part of a reactor pressure vessel with
a 180 mm-thick ferritic base material followed by a 6 mm-thick austenitic cladding layer. The phased
array probe was coupled at the outer ferritic surface. We detected and sized fatigue cracks within the
cladding with a depth ranging from 4 mm to 10 mm. Secondly, we investigated a mock-up model
resembling a nozzle including a thermo sleeve inlet and a maximum wall thickness of about 37 mm.
Artificially inserted notches with a depth of 3 mm could be detected and sized, where the thermo
sleeve is welded at the inside of the nozzle.
Guided waves travel in plates and hollow cylinders over large distances and propagate with multiple mode shapes. Therefore the waves can be used viably for integrity tests of large scale structures. The number of propagating modes increases with frequency. Due to their dispersive character the different modes are manageable only in a limited frequency range. Depending on the wave length and on the angle of impingement of the wave front to the coupling surface between transducer and structure, a trace wavelength is predefined and a selective excitation of single modes becomes feasible. By using phased array technique the excited wave mode can be selected by controlling the input signal of the transducer. Different modes are excitable with a sin-gle mechanical set-up. In a first step of the investigation, a calculation model is developed modelling the wave propagation and the selective excitation of guided wave modes depending on the control parameters. Dedicated experiments show the applicability of the method presented. The flaw detection of different sized cracks and of material thickness reductions is examined depending on the excitation wave mode.