Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- BOFDA (8)
- Brillouin scattering (7)
- Distributed sensor (6)
- Fiber optic sensor (6)
- Dike monitoring (5)
- Structural health monitoring (5)
- Brillouin sensor (4)
- Distributed sensing (4)
- Geotextiles (4)
- POF OTDR (4)
Organisationseinheit der BAM
We report on the development of a complete system for spatially resolved detection of critical soil displacement in river embankments. The system uses Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain in silica optical fibers. Our development consists of the measurement unit, an adequate coating for the optical fibers and a technique to integrate the coated optical fibers into geotextiles as they are commonly used in dike construction. We present several laboratory and field tests that prove the capability of the system to detect areas of soil displacement as small as 2 meters. These are the first tests of truly distributed strain measurements on optical fibers embedded into geosynthetics.
Analytical model for ball-lensed couplers to calculate the insertion loss for each optical mode. The basis for the calculation are commercial perfluorinated polymer optical (PFGI-POFs) and silica based fibres (SOFs). The modal power distribution for given misalignments are presented as well as the reflection-based losses at all optical interfaces. Additionally, the ball-lensed interconnection between PFGI-POF and SOF was theoretically demonstrated.
Bond monitoring in temperature dependent applications using Brillouin optical time domain analyser
(2016)
Adhesive bond has to be evaluated for its integrity over a range of temperature. Adhesive is being used to bond the sensors with structures. There is no validated technique to test its performance. In this paper, we propose a Brillouin Optical Time Domain Analyzer (BOTDA) based methodology to detect temperature-induced adhesive bond failure below room temperature using distributed fiber optic sensor. The differential coefficient of thermal expansion of the structure and fiber sensor can lead to bond failure at low temperature. Optical fiber impregnated in the structure will experience differential temperature/strain due to debond of the adhesive. This leads to the frequency and amplitude decomposition of the Brillouin spectra. This is a good indication for real-time monitoring of the integrity of a bond.
We compare four different sensing solutions suitable for distributed fiber optic humidity sensing in per uorinated graded-index polymer optical fibers (PFGI-POFs). Compared to silica fbers, polymer optical fibers over advantageous beneffits including signifficantly higher break down strain, fracture toughness and humidity sensitivity. Various humidity-related effects in PFGI-POFs have been reported in the last years including measured attenuation and length changes as well as Brillouin frequency and Bragg wavelength shifts. The four aforementioned methods could serve as a basis for distributed and quasi-distributed humidity sensing and are described here closely with an emphasis on plausible cross effects to temperature and strain. The main focus of this paper lies on the comparison of four approaches with regard to method complexity, sensitivity to humidity, spatial resolution, real-time capability and effort to compensate for cross effects.
We report on the development of distributed fiber sensors and their integration into
geosynthetics as they are commonly used in the construction of dikes and dams for flood protection.
The sensing system uses Stimulated Brillouin Scattering (SBS) in silica optical fibers.
Using the Brillouin frequency analysis, the system is capable of detecting changes in both strain
and temperature along the optical fibers. The strain experienced by the optical fibers corresponds
to the deformation of the geosynthetics in case of a critical soil displacement. To satisfy
requirements of dike structures, the system will be optimized to detect soil displacement with a
spatial resolution of 5 m or less over a length in the range of 10 km. These rather modest requirements
leave space for optimization on resolution of the measurement values, measurement
time and cost efficiency.
To our knowledge, this is the first distributed fiber sensor using SBS that is especially designed
for the monitoring of soil displacement in dikes which is made possible by a novel method
for the integration of optical fibers into different types of geosynthetics.
We present our research on the development of a Brillouin optical frequency-domain analysis (BOFDA) using a perfluorinated graded-index polymer optical fiber (PFGI-POF) as a sensing fiber. The described works include investigations both on the selection of the setup components with respect to mode coupling effects and on the impact of the humidity cross-sensitivity. The suitability of the developed POF-based BOFDA is proved by a distributed measurement on an 86 m long PFGI-POF recorded with the spatial resolution of 6 m.
We report on the development of a distributed fiber optical sensor system for structural health monitoring of largc-scale geotechnical and civil infrastructures. The system is based on Brillouin frequency domain analysis (BOFDA) for distributed measurement of strain and temperature along Standard silica optical fibers used as sensors. By additional incorporation of the fiber optic sensors in geosynthetics, two-dimensional sensors can be realized. Such smart geosynthetics can be used for reinforeerneut of geotechnical and masonry structures and the embedded fiber optic sensors can provide information about the condition of the structures and detect the presence of any damages and destructions in real time.