Filtern
Erscheinungsjahr
- 2012 (3) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (3) (entfernen)
Schlagworte
- Batch tests (1)
- Column tests (1)
- Klärschlamm (1)
- Leaching (1)
- Phoshorrückgewinnung (1)
- Standardization (1)
- Waste materials (1)
Synthetic athletic tracks and turf areas for outdoor sporting grounds may release contaminants due to the chemical composition of some components. A primary example is that of zinc from reused scrap tires (main constituent, styrene butadiene rubber, SBR), which might be harmful to the environment. Thus, methods for the risk assessment of those materials are required. Laboratory leaching methods like batch and column tests are widely used to examine the soil–groundwater pathway. We tested several components for artificial sporting grounds with batch tests at a liquid to solid (LS) ratio of 2 L/kg and column tests with an LS up to 26.5 L/kg. We found a higher zinc release in the batch test eluates for all granules, ranging from 15% higher to 687% higher versus data from column tests for SBR granules. Accompanying parameters, especially the very high turbidity of one ethylene propylene diene monomer rubber (EPDM) or thermoplastic elastomer (TPE) eluates, reflect the stronger mechanical stress of batch testing. This indicates that batch test procedures might not be suitable for the risk assessment of synthetic sporting ground components. Column tests, on the other hand, represent field conditions more closely and allow for determination of time-dependent contaminants release.
In Deutschland werden gegenwärtig etwa 53 % der kommunalen Klärschlämme in Mono- und Müllverbrennungsanlagen sowie Kraft- und Zementwerken thermisch und 47 % stofflich, d.h. landwirtschaftlich (30 %) oder in landschaftsbaulichen Maßnahmen u.ä. verwertet (17 %). Bezogen auf die etwa 9,4 Mrd Kubikmeter Abwasser, die pro Jahr in Deutschland anfallen, kann von einem Potenzial von 75000 t Phosphor/a (davon ca. 67500 t P/a im Klärschlamm) ausgegangen werden. Bislang werden in der Literatur ca. 37 Verfahren zur abwasserseitigen Rückgewinnung von Phosphor beschrieben, die im Labor, im Technikumsmaßstab oder in Pilotanlagen erprobt worden sind. Weltweit wurden bisher ca. 12 davon großtechnisch umgesetzt. Etwa vier verschiedene Verfahrenstechniken lassen sich derzeit in Deutschland finden. Einige Verfahren arbeiten mit Ionenaustauschern, zum überwiegenden Teil handelt es sich jedoch um Fällungs- oder Kristallisationsverfahren, bei denen Magnesium-Ammonium-Phosphat (MAP, Struvit) entweder aus den Haupt- oder Nebenströmen einer Kläranlage oder aus dem Schlamm bzw. Schlammwasser gewonnen wird. Für den Nährstoff Phosphor konnte in den Klärschlammaschen ein Gehalt von durchschnittlich 7 % ermittelt werden. Daraus ergibt sich ein Potenzial von etwa 17500 t P/a (Tendenz steigend). Je nach Verfahren kann mit einem Rückgewinnungspotenzial von etwa 60 bis 90 % Phosphor aus der Asche (ca. 55 bis 80 % Pges bezogen auf den Kläranlagenzulauf) gerechnet werden
Leaching tests are fundamental tools for the assessment of long-term impact of contaminated waste materials on the soil-groundwater pathway. Experiments were carried out in the framework of standardization and validation of column percolation and batch test procedures, in particular concerning the stipulation of the experimental setup. The colloid release of column and batch experiments was compared and the influence of different column filling heights (12.5–50 cm) on the release of polycyclic aromatic hydrocarbons (PAH) from soil was studied, as well as the effect of varying contact times (2.5–16 h) on the release of chromium from construction and demolition (C&D) waste and municipal solid waste incineration (MSWI) bottom ash. The results indicate that filtration of the eluate, which is required for batch tests, does not always allow the simulation of the actual colloid amount in soil pore water. Medium column heights four times the inner diameter of the column seemed to provide reasonable equilibrium adjustment conditions and avoid major biodegradation. The release of chromium was only marginally affected by the contact time, varied between 0.115 and 0.150 mg/kg for demolition waste eluate at a liquid-to-solid ratio of approximately 5 L/kg.