Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (143)
- Vortrag (51)
- Beitrag zu einem Tagungsband (30)
- Beitrag zu einem Sammelband (28)
- Posterpräsentation (13)
- Buchkapitel (10)
Schlagworte
- Femtosecond laser (28)
- Laser-induced periodic surface structures (LIPSS) (26)
- Femtosecond laser ablation (24)
- Laser ablation (23)
- Laser processing (14)
- Radiation protection (12)
- Silicon (11)
- Laser cleaning (10)
- Ablation (9)
- Materialbearbeitung (9)
- Surface functionalization (9)
- Laser-induced X-ray emission (8)
- Nanosecond laser (8)
- Nanostructures (8)
- Ultrashort laser pulses (7)
- Laser (6)
- Röntgenstrahlung (6)
- Titanium (6)
- Ultrakurze Laserpulse (6)
- Femtosecond pulse laser (5)
- Femtosekundenlaser (5)
- High-speed optical techniques (5)
- Laser beam effects (5)
- Laser safety (5)
- Laser-induced periodic surface structures (5)
- Paper (5)
- Steel (5)
- Strahlenschutz (5)
- CIGSe (4)
- Chalcopyrite (4)
- DDT (4)
- Double-pulse experiments (4)
- Femtosecond laser processing (4)
- Friction (4)
- Laser-induced periodic surface structures, LIPSS (4)
- Laserreinigung (4)
- Micro solar cell (4)
- Microstructures (4)
- Polymer (4)
- Semiconductors (4)
- Tribology (4)
- Ultrafast optical techniques (4)
- Ultrakurzpulslaser (4)
- Ultrashort laser material interaction (4)
- X-ray emission (4)
- Abschirmung (3)
- Aluminium (3)
- Applications (3)
- Biofilms (3)
- Bone implant (3)
- Cleaning (3)
- Copper-indium-gallium-diselenide (3)
- Damage (3)
- Damage threshold (3)
- Dielectrics (3)
- Femtosecond (3)
- Femtosecond laser patterning (3)
- Fused silica (3)
- Incubation (3)
- Laser-induced damage threshold (3)
- Laser-induced forward transfer (3)
- Laser-induced forward transfer (LIFT) (3)
- Laser-induzierte Röntgenstrahlung (3)
- Laserschutz (3)
- Light concentration (3)
- Mach-Zehnder interferometer (3)
- Micromachining (3)
- Microphone (3)
- Oxidation (3)
- Photovoltaics (3)
- Secondary hazard (3)
- Silicon compounds (3)
- Silk (3)
- Surface morphology (3)
- Surface structure (3)
- Threshold (3)
- Titanium alloy (3)
- Titanium nitride (3)
- Ultrakurze Laserimpulse (3)
- Ultrashort pulse laser processing (3)
- Ultrashort pulsed laser (3)
- Wear (3)
- Acoustic measurement (2)
- Aluminium oxide (2)
- Auge (2)
- Auger electron spectroscopy (2)
- Bioceramic coating (2)
- Calcium phosphate (2)
- Cell adhesion (2)
- Decontamination (2)
- Doping (2)
- Elemental semiconductors (2)
- Femtosecond-Pulse Laser (2)
- Fluid transport (2)
- Glass (2)
- Glasses (2)
- Image enhancement (2)
- Image restoration (2)
- Indium phosphide (2)
- Laser damage (2)
- Laser impact on surfaces (2)
- Laser micromachining (2)
- Laser-beam impact phenomena (79.20.Ds) (2)
- Laser-induced x-ray emission (2)
- Lasersicherheit (2)
- Material processing (2)
- Medizinische Anwendung (2)
- Micro solar cells (2)
- Micro-concentrator solar cell (2)
- Multimode fiber (2)
- Multispectral imaging (2)
- Nanosekundenlaser (2)
- Niobium (2)
- Optical fiber (2)
- Optical multimode fiber (2)
- Optical properties (2)
- Pacemaker (2)
- Physical radiation damage (2)
- Physical radiation damage (61.80.-x) (2)
- Polaritons (2)
- Pulslaser (2)
- Radiation treatment (2)
- Röntgenemission (2)
- Scanning electron microscopy (2)
- Schutzbrille (2)
- Second harmonic generation (SHG) (2)
- Selective emitter (2)
- Silica (2)
- Silica glass (2)
- Silicon oxide (2)
- Solar cell (2)
- Subpicosecond laser ablation (2)
- Surface plasmon polaritons (2)
- Surface plasmons (2)
- Surface texture (2)
- Surface wetting (2)
- Textiles (2)
- Ultra-short pulse laser processing (2)
- Ultrafast phenomena (2)
- Wooden artworks (2)
- X-ray photoelectron spectroscopy (2)
- Zahn (2)
- (LIPSS) (1)
- Ab initio calculations (1)
- Absorber optimization (1)
- Acoustical measurement (1)
- Ageing (1)
- Aluminium alloys (1)
- Amorphization (1)
- Amorphous (1)
- Ancient manuscripts (1)
- Anodic oxidation (1)
- Anodization (1)
- Antibacterial surfaces (1)
- Application (1)
- Arbeitsschutz (1)
- Artificial soiling (1)
- Atomic force microscopy (1)
- Bacterial adhesion (1)
- Barium aluminium borosilicate glass (1)
- Bariumalumoborosilicate glass (1)
- Bariumalumoborosilicate glass surfaces (1)
- Bending strength (1)
- Bioaktives Material (1)
- Bioceramics (1)
- Biochemical reaction mechanisms and kinetics (1)
- Biofilm (1)
- Bioinspiration (1)
- Biologische Anwendungen (1)
- Biomedizin (1)
- Biomimetic surfaces (1)
- Biomometics (1)
- Bionic materials (1)
- Biosensor (1)
- Bone (1)
- Bor (1)
- Bug (1)
- CHOCLAB (1)
- CIGSe micro solar cells (1)
- Calcium compounds (1)
- Calcium phosphate coating (1)
- Carbon (81.05.Uw) (1)
- Carrier excitation (1)
- Central Asia (1)
- Cleaning threshold (1)
- Coatings (1)
- Cold atmospheric pressure plasma (1)
- Colorimetry (1)
- Conduction bands (1)
- Conservation (1)
- Copper indium gallium diselenide (CIGSe) (1)
- Copper-indium-gallium-diselenide (CIGSe) (1)
- Crystallization (1)
- Cu(In,Ga)Se2 (1)
- CuInSe2 (1)
- Cultural heritage (1)
- Defect model (1)
- Degree of polymerization (1)
- Dentistry (1)
- Diamond-like carbon (1)
- Diffusion (1)
- Doping thin films (1)
- Double-pulse (1)
- Dry Etching (1)
- Dünnfilm, diamantartig (1)
- Dünnfilmtechnologie (1)
- Dünnschicht, halbleitend (1)
- Dünnschicht, metallisch (1)
- EN 12254 (1)
- EN 207 (1)
- EN 208 (1)
- Editorial (1)
- Electrochemistry (1)
- Electromagnetic scattering (1)
- Ellipsometrie (1)
- Etch Process (1)
- European Materials Research Society (E-MRS) (1)
- European standard (1)
- Eye protection (1)
- FS-laser ablation (1)
- Farbmessung (1)
- Fatigue (1)
- Fatigue testing (1)
- Femtosecond pulses (1)
- Femtosekunden (1)
- Femtosekundenpulslaser (1)
- Fermi-Level Pinning (1)
- Fiber waveguides (1)
- Fiber waveguides (42.81.Qb) (1)
- Fictive temperature (1)
- Filter (1)
- Filterpapier (1)
- Fourier transforms (1)
- Fs-laser patterning (1)
- Glasfilter (1)
- Glass transitions (1)
- Glasses (81.05.Kf) (1)
- Glucose (1)
- Gold films (1)
- Hadernpapier (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Heat affected zone (1)
- Hierarchical micro-nanostructures (1)
- Holz (1)
- Holzhaltiges Papier (1)
- Hydrocarbons (1)
- ISO 11254-2 (1)
- Implantat (1)
- Indium (1)
- Indium islands (1)
- Indium preferential nucleation (1)
- Industrial applications (1)
- Interfacial Electronic States (1)
- Interferometer (1)
- Justierbrille (1)
- Knochenersatz (1)
- Kohlenstoffschichten (1)
- Kunststoffschicht (1)
- Kurzpulslaser (1)
- LIDT (1)
- LIFT (1)
- Laser Machining (1)
- Laser Processing (1)
- Laser beam machining (1)
- Laser induced damage (1)
- Laser irradiation surface effects (1)
- Laser materials (1)
- Laser materials processing (1)
- Laser pulses (1)
- Laser spallation (1)
- Laser treatment (1)
- Laser-Ablation (1)
- Laser-Material-Bearbeitung (1)
- Laser-Materialbearbeitung (1)
- Laser-beam impact phenomena (1)
- Laser-induced damage (1)
- Laser-induced fixation (1)
- Laser-induced nanostructures (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface strcutures (LIPSS) (1)
- Laser-material interactions (1)
- Laser-modified surface (1)
- Laserinduzierte Zerstörschwelle (1)
- Lasermaterialbearbeitung (1)
- Lasermikrobearbeitung (1)
- Lasersintern (1)
- Lasertechnik (1)
- Lichtwellenleiter (1)
- Lizard (1)
- MOS Diode (1)
- Materials processing (1)
- Mechanical stress (1)
- Melting (1)
- Membrane perforation (1)
- Metallprothese (1)
- Metals (1)
- Michelson interferometer (1)
- Micro-concentrator (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microconcentrator solar cell (1)
- Microscopy (1)
- Microsecond laser (1)
- Microstructuring (1)
- Mikrobearbeitung (1)
- Mikroskopie (1)
- Molybdenum substrate (1)
- Multi-Photon Absorption (1)
- Multicrystalline silicon (1)
- Multiple-pulse damage (1)
- Nanosecond Pulses (1)
- Nanosecond laser cleaning (1)
- Nanostrcutures (1)
- Nd:YAG laser (1)
- Nd:YAG-Laser (1)
- Nonlinear Electroreflectance (1)
- Oberflächenstrukturierung (1)
- Ophthalmology (1)
- Optical breakdown (1)
- Optical coatings (1)
- Optical constants (78.20.Ci) (1)
- Optical fibers (1)
- Optical microscopy (1)
- Optical proper (1)
- Optics at surfaces (1)
- Optische Konstanten (1)
- Optische Multimodefaser (1)
- Orthopaedics (1)
- Oxide (1)
- Oxide growth (1)
- Papery (1)
- Parchment (1)
- Personal protective equipment (1)
- Photochemical reactions of biomolecules (1)
- Photoelektron spectroscopy (1)
- Photovoltaik (1)
- Physical vapor deposition (1)
- Picture Post Card (1)
- Pigments (1)
- Polarisation (1)
- Poly(methylmetacrylate) (1)
- Polycarbonate (1)
- Polyethylene (1)
- Polymer ablation (1)
- Polymerfilter (1)
- Polymers (1)
- Polymers-radiation effects (1)
- Polymethylmethacrylate (1)
- Probekörper (1)
- Prosthetics (1)
- Protection housing (1)
- Pulse Laser (1)
- Pulse duration (1)
- Radiation treatment (81.40.Wx) (1)
- Refractive index (1)
- Reproducibility (1)
- Ripples (1)
- Rods (structures) (1)
- Round-robin experiment (1)
- S on 1-LIDT (1)
- SHG (1)
- SIMS (1)
- Scanning Auger electron microscopy (1)
- Second-Harmonic Generation (1)
- Sekundärstrahlung (1)
- Semiconductor (1)
- Semiconductor electrode (1)
- Silicon nitride (1)
- Silicon solar cell (1)
- Silk Road (1)
- Simulation (1)
- Single- and multi-shot ablation (1)
- Solid electrolyte interface (1)
- Solid-state plasma (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy (1)
- Spot size (1)
- Spring Meeting 2016 (1)
- Structuring (1)
- Sub-Picosecond-Pulse Laser (1)
- Subpicosecond-Pulse Laser (1)
- Superconductivity (1)
- Surface and interface chemistry of polymers (1)
- Surface plasmon polariton (1)
- Surface processing (1)
- Surface superconductivity (1)
- Surface treatment (1)
- Technische Materialien (1)
- Textile (1)
- Thin films (1)
- Threshold fluence (1)
- Threshold of silicon (1)
- Ti-6Al-4V alloy (1)
- Ti6Al4V alloys (1)
- Ti:sapphire laser (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved measurements (1)
- Time-resolved reflectivity measurements (1)
- Titanium alloys (1)
- Titanium nitride films (1)
- Treshold (1)
- Tungsten (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser (1)
- Vanadium alloys (1)
- Verrußung (1)
- Viscometry (1)
- Wall paintings (1)
- Wandmalerei (1)
- Water (1)
- Wetting (1)
- Wood (1)
- X-ray (1)
- X-ray diffraction (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray spectrum (1)
- fused silica (1)
- laser damage (1)
- lossy materials (1)
- nanosecond laser (1)
- optical fiber (1)
- plasmon lifetime (1)
- surface plasmon polaritons (1)
Organisationseinheit der BAM
- 6 Materialchemie (56)
- 6.2 Material- und Oberflächentechnologien (56)
- 9 Komponentensicherheit (4)
- 9.5 Tribologie und Verschleißschutz (4)
- 6.7 Materialsynthese und Design (3)
- 4 Material und Umwelt (2)
- 4.1 Biologische Materialschädigung und Referenzorganismen (2)
- 6.1 Oberflächen- und Dünnschichtanalyse (2)
- 5 Werkstofftechnik (1)
- 5.1 Mikrostruktur Design und Degradation (1)
Paper des Monats
- ja (3)
The possibility to excite surface plasmon polaritons (SPPs) at the interface between two media depends on the optical properties of both media and geometrical aspects. Specific conditions allowing the coupling of light with a plasmon-active interface must be satisfied. Plasmonic effects are well described in noble metals where the imaginary part of the dielectric permittivity is often neglected ('perfect medium approximation (PMA)'). However, some systems exist for which such approximation cannot be applied, hence requiring a refinement of the common SPP theory. In this context, several properties of SPPs such as excitation conditions, period of the electromagnetic field modulation and SPP lifetime then may strongly deviate from that of the PMA. In this paper, calculations taking into account the imaginary part of the dielectric permittivities are presented. The model identifies analytical terms which should not be neglected in the mathematical description of SPPs on lossy materials. These calculations are applied to numerous material combinations resulting in a prediction of the corresponding SPP features. A list of plasmon-active interfaces is provided along with a quantification of the above mentioned SPP properties in the regime where the PMA is not applicable.
Surface nanostructures provide the possibility to create and tailor surface functionalities mainly via controlling their topography along with other chemical and physical material properties. One of the most appealing technologies for surface functionalization via micro- and nanostructuring is based on laser processing. This can be done either via direct contour-shaping of the irradiated material using a tightly focused laser beam or in a self-ordered way that allows employing larger laser beam diameters along with areal scanning to create a variety of laser-induced periodic surface structures (LIPSS). For the latter approach, particularly ultrashort pulsed lasers have recently pushed the borders across long-lasting limitations regarding the minimum achievable feature sizes and additionally boosted up the production times. This chapter reviews the plethora of recently investigated applications of LIPSS—for example, via imposing diffractive or plasmonic structural colors, the management of liquids and surface wetting properties, biomedical and bioinspired functionalities, beneficial effects in tribology for reducing friction and wear, the manipulation of optical scattering and absorption in photovoltaics, or the modification of magnetic or superconducting surface properties in other energy applications. The footprint of the LIPSS-based technology is explored in detail regarding the current state of industrialization, including an analysis of the market and associated LIPSS production costs.
Unwanted X-ray emission in ultrashort pulse laser processing: From metallic to biological materials
(2023)
Ultrashort laser pulses have become established in many industrial processes. Additionally, they are also an integral part of medical applications especially in ophthalmology and to some extent in dentistry. The availability of highly repetitive powerful laser sources and advanced laser beam control systems have favored these developments. However, the laser processing may be accompanied by the generation of unwanted X-rays. Small doses per laser pulse can accumulate to significant dose levels at high laser pulse repetition rates. Moreover, burst mode processing increases the X-ray dose rates compared to single pulse use and results in X-ray photon energies up to 40 keV for tungsten targets. For laser treatment of human teeth, clearly noticeable X-ray skin dose rates can be found. The paper summarizes the current state of the art in the field of undesired generation of X-ray radiation during ultrashort pulse laser processing in air.
Bacterial biofilms pose serious problems in medical and industrial settings. One of the major societal challenges lies in the increasing resistance of bacteria against biocides used in antimicrobial treatments, e.g., via overabundant use in medicine, industry, and agriculture or cleaning and disinfection in private households. Hence, new efficient bacteria-repellent strategies avoiding the use of biocides are strongly desired. One promising route to achieve bacteria-repellent surfaces lies in the contactless and aseptic large-area laser-processing of technical surfaces. Tailored surface textures, enabled by different laser-processing strategies that result in topographic scales ranging from nanometers to micrometers may provide a solution to this challenge. This article presents a current state-of-the-art review of laser-surface subtractive texturing approaches for controlling the biofilm formation for different bacterial strains and in different environments. Based on specific properties of bacteria and laser-processed surfaces, the challenges of anti-microbial surface designs are discussed, and future directions will be outlined.
Ultrakurzpuls-Lasertechnik ist heute der Schlüssel für eine Vielzahl von Anwendungen in der industriellen Lasermaterialbearbeitung. Beim Einsatz hoher Laser-Intensitäten kann allerdings unerwünschte Röntgenstrahlung erzeugt werden. Die Röntgendosis und Energieverteilung ist von Laser-, Material- und Prozessparametern abhängig. Es können Röntgendosen über den erlaubten Grenzwerten für die Exposition des Menschen erreicht werden.
Laser-induced periodic surface structures (LIPSS) are a universal phenomenon and can be generated on almost any material by irradiation with linearly polarized radiation. This chapter reviews the current state in the field of LIPSS, which are formed in a “self-ordered” way and are often accompanying materials processing applications. LIPSS can be produced in a single-stage process and enable surface nanostructuring and, in turn, adaption of optical, mechanical, and chemical surface properties. Typically, they feature a structural size ranging from several micrometers down to less than 100 nm and show a clear correlation with the polarization direction of the light used for their generation. Various types of LIPSS are classified, relevant control parameters are identified, and their material-specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics. Finally, technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.
Laser-induced periodic surface structures (LIPSS) are a universal phenomenon and can be generated on almost any material by irradiation with linearly polarized radiation. This chapter reviews the current state in the field of LIPSS, which are formed in a “self-ordered” way and are often accompanying materials processing applications. LIPSS can be produced in a single-stage process and enable surface nanostructuring and, in turn, adaption of optical, mechanical, and chemical surface properties. Typically, they feature a structural size ranging from several micrometers down to less than 100 nm and show a clear correlation with the polarization direction of the light used for their generation. Various types of LIPSS are classified, relevant control parameters are identified, and their material-specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics. Finally, technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.
Ultrashort laser pulses have found their way into industrial material processing. They take advantage of the fact that moderate laser fluences can produce high quality material removal without significant thermal influence. The growing availability of powerful, highly repeating laser sources and an advanced laser beam control have favored these developments. However, the laser-matter interaction can be accompanied by the production of X-rays. Small doses per laser pulse can accumulate to significant dose rates at high laser pulse repetition rates which may exceed the permitted X-ray limits for human exposure. Consequently, a proper radiation shielding must be considered in laser material processing. The paper summarizes the current state of the art in the field of undesired generation of X-ray radiation during ultrashort pulse laser material processing in air.
Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon
(2021)
Superficial amorphization and re-crystallization of silicon in <111> and <100> orientation after irradiation by femtosecond laser pulses (790 nm, 30 fs) are studied using optical imaging and transmission electron microscopy. Spectroscopic imaging ellipsometry (SIE) allows fast data acquisition at multiple wavelengths and provides experimental data for calculating nanometric amorphous layer thickness profiles with micrometric lateral resolution based on a thin-film layer model. For a radially Gaussian laser beam and at moderate peak fluences above the melting and below the ablation thresholds, laterally parabolic amorphous layer profiles with maximum thicknesses of several tens of nanometers were quantitatively attained. The accuracy of the calculations is verified experimentally by high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (STEM-EDX). Along with topographic information obtained by atomic force microscopy (AFM), a comprehensive picture of the superficial re-solidification of silicon after local melting by femtosecond laser pulses is drawn.
The exciting properties of micro- and nano-patterned surfaces found in natural species hide a virtually endless potential of technological ideas, opening new opportunities for innovation and exploitation in materials science and engineering. Due to the diversity of biomimetic surface functionalities, inspirations from natural surfaces are interesting for a broad range of applications in engineering, including phenomena of adhesion, friction, wear, lubrication, wetting phenomena, self-cleaning, antifouling, antibacterial phenomena, thermoregulation and optics. Lasers are increasingly proving to be promising tools for the precise and controlled structuring of materials at micro- and nano-scales. When ultrashort-pulsed lasers are used, the optimal interplay between laser and material parameters enables structuring down to the nanometer scale. Besides this, a unique aspect of laser processing technology is the possibility for material modifications at multiple (hierarchical) length scales, leading to the complex biomimetic micro- and nano-scale patterns, while adding a new dimension to structure optimization. This article reviews the current state of the art of laser processing methodologies, which are being used for the fabrication of bioinspired artificial surfaces to realize extraordinary wetting, optical, mechanical, and biological-active properties for numerous applications. The innovative aspect of laser functionalized biomimetic surfaces for a wide variety of current and future applications is particularly demonstrated and discussed. The article concludes with illustrating the wealth of arising possibilities and the number of new laser micro/nano fabrication approaches for obtaining complex high-resolution features, which prescribe a future where control of structures and subsequent functionalities are beyond our current imagination.
Effects of laser-induced periodic surface structures on the superconducting properties of Niobium
(2020)
It is well known that the use of ultrashort (fs) pulsed lasers can induce the generation of (quasi-) periodic nanostructures (LIPSS, ripples) on the surface of many materials. Such nanostructures have also been observed in sample’s surfaces irradiated with UV lasers with a pulse duration of 300 ps. In this work, we compare the characteristics of these nanostructures on 1-mm and on 25-μm thick niobium sheets induced by 30 fs n-IR and 300 ps UV pulsed lasers. In addition to conventional continuous or burst mode processing configurations, two-dimensional laser beam and line scanning modes have been investigated in this work. The latter allows the processing of large areas with a more uniform distribution of nanostructures at the surface. The influence of the generated nanostructures on the superconducting properties of niobium has also been explored. For this aim, magnetic hysteresis loops have been measured at different cryogenic temperatures to analyse how these laser treatments affect the flux pinning behaviour and, in consequence, the superconductor’s critical current values. It was observed that laser treatments are able to modify the superconducting properties of niobium samples.
Laser texturing is an emerging technology for generating surface functionalities on basis of optical, mechanical, or chemical properties. Taking benefit of laser sources with ultrashort (fs) pulse durations features outstanding precision of machining and negligible rims or burrs surrounding the laser-irradiation zone. Consequently, additional mechanical or chemical post-processing steps are usually not required for fs-laser surface texturing (fs-LST). This work aimed to provide a bridge between research in the field of tribology and laser materials processing. The paper reviews the current state-of-the-art in fs-LST, with a focus on the tribological performance (friction and wear) of specific self-organized surface structures (so-called ripples, grooves, and spikes) on steel and titanium alloys. On the titanium alloy, specific sickle-shaped hybrid micro-nanostructures were also observed and tribologically tested. Care is taken to identify accompanying effects affecting the materials hardness, superficial oxidation, nano- and microscale topographies, and the role of additives contained in lubricants, such as commercial engine oil.
In this contribution, chemical, structural, and mechanical alterations in various types of femtosecond laser-generated surface structures, i.e., laser-induced periodic surface structures (LIPSS, ripples), Grooves, and Spikes on titanium alloy, are characterized by various surface analytical techniques, including X-ray diffraction and glow-discharge optical emission spectroscopy. The formation of oxide layers of the different laser-based structures inherently influences the friction and wear performance as demonstrated in oil-lubricated reciprocating sliding tribological tests (RSTTs) along with subsequent elemental mapping by energy-dispersive X-ray analysis. It is revealed that the fs-laser scan processing (790 nm, 30 fs, 1 kHz) of near-wavelength-sized LIPSS leads to the formation of a graded oxide layer extending a few hundreds of nanometers into depth, consisting mainly of amorphous oxides. Other superficial fs-laser-generated structures such as periodic Grooves and irregular Spikes produced at higher fluences and effective number of pulses per unit area present even thicker graded oxide layers that are also suitable for friction reduction and wear resistance. Ultimately, these femtosecond laser-induced nanostructured surface layers efficiently prevent a direct metal-to-metal contact in the RSTT and may act as an anchor layer for specific wear-reducing additives contained in the used engine oil.
Ultrashort pulse laser processing of materials allows for precise machining with high accuracy. By increasing the repetition rate to several 100 kHz, laser machining becomes quick and cost-effective. Ultrafast laser processing at high repetition rates and peak intensities above 10^13 W/cm^2 can cause a potential hazard by generation of unwanted x-ray radiation. Therefore, radiation protection must be considered. For 925 fs pulse duration at a center wavelength of 1030 nm, the x-ray emission in air at a repetition rate of 400 kHz was investigated up to a
peak intensity of 2.6 × 10^14 W/cm^2. Based on the presented measurements, the properties of potential shielding materials will be discussed. By extending our previous works, a scaling of the x-ray radiation emission to higher peak intensities up to 10^15 W/cm^2 is described, and emitted x-ray doses are predicted.
Ultrashort pulse laser processing can result in the secondary generation of unwanted X-rays if a critical laser irradiance of about 10^13 W/cm^2 is exceeded. Spectral X-ray emissions were investigated during the processing of tungsten and steel using three complementary spectrometers (based on CdTe and silicon drift detectors) simultaneously for the identification of a worst-case spectral scenario. Therefore, maximum X-ray photon energies were determined, and corresponding dose equivalent rates were calculated. An ultrashort pulse laser workstation with a pulse duration of 274 fs, a center wavelength of 1030 nm, pulse repetition rates between 50 kHz and 200 kHz, and a Gaussian laser beam focused to a spot diameter of 33 µm was employed in a single pulse and burst laser operation mode. Different combinations of laser pulse energy and repetition rate were utilized, keeping the average laser power constant close to the maximum power of 20 W. Peak irradiances ranging from 7.3 × 10^13 W/cm^2 up to 3.0 × 10^14 W/cm^2 were used. The X-ray dose equivalent rate increases for lower repetition rates and higher pulse energy if a constant average power is used. Laser processing with burst mode significantly increases the dose rates and the X-ray photon energies. A maximum X-ray photon energy of about 40 keV was observed for burst mode processing of tungsten with a repetition rate of 50 kHz and a peak irradiance of 3 × 10^14 W/cm^2.