Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (120) (entfernen)
Referierte Publikation
- ja (120) (entfernen)
Schlagworte
- Femtosecond laser ablation (19)
- Laser-induced periodic surface structures (LIPSS) (18)
- Laser ablation (15)
- Femtosecond laser (14)
- Silicon (8)
- Laser processing (6)
- Radiation protection (6)
- Titanium (6)
- High-speed optical techniques (5)
- Laser beam effects (5)
- Laser cleaning (5)
- Laser-induced periodic surface structures (5)
- Double-pulse experiments (4)
- Friction (4)
- Nanostructures (4)
- Steel (4)
- Surface functionalization (4)
- Ultrafast optical techniques (4)
- Ablation (3)
- Aluminium (3)
- Femtosecond laser processing (3)
- Fused silica (3)
- Laser (3)
- Laser-induced X-ray emission (3)
- Laser-induced periodic surface structures, LIPSS (3)
- Mach-Zehnder interferometer (3)
- Nanosecond laser (3)
- Oxidation (3)
- Silicon compounds (3)
- Surface morphology (3)
- Surface structure (3)
- Threshold (3)
- Tribology (3)
- Ultrashort laser pulses (3)
- Ultrashort pulsed laser (3)
- Wear (3)
- Acoustic measurement (2)
- Bioceramic coating (2)
- Biofilms (2)
- Bone implant (2)
- Calcium phosphate (2)
- Damage (2)
- Elemental semiconductors (2)
- Femtosecond (2)
- Femtosecond laser patterning (2)
- Fluid transport (2)
- Glasses (2)
- Incubation (2)
- Laser safety (2)
- Laser-beam impact phenomena (79.20.Ds) (2)
- Laser-induced damage threshold (2)
- Laser-induced x-ray emission (2)
- Micro-concentrator solar cell (2)
- Microphone (2)
- Niobium (2)
- Optical fiber (2)
- Optical properties (2)
- Paper (2)
- Photovoltaics (2)
- Physical radiation damage (2)
- Physical radiation damage (61.80.-x) (2)
- Polaritons (2)
- Polymer (2)
- Radiation treatment (2)
- Scanning electron microscopy (2)
- Silicon oxide (2)
- Subpicosecond laser ablation (2)
- Surface plasmons (2)
- Surface texture (2)
- Surface wetting (2)
- Titanium nitride (2)
- Ultrashort laser material interaction (2)
- X-ray photoelectron spectroscopy (2)
- (LIPSS) (1)
- Ab initio calculations (1)
- Aluminium alloys (1)
- Aluminium oxide (1)
- Amorphization (1)
- Amorphous (1)
- Anodic oxidation (1)
- Anodization (1)
- Antibacterial surfaces (1)
- Applications (1)
- Atomic force microscopy (1)
- Auger electron spectroscopy (1)
- Bacterial adhesion (1)
- Barium aluminium borosilicate glass (1)
- Bariumalumoborosilicate glass (1)
- Bariumalumoborosilicate glass surfaces (1)
- Bending strength (1)
- Bioceramics (1)
- Biofilm (1)
- Bioinspiration (1)
- Biomimetic surfaces (1)
- Biomometics (1)
- Bionic materials (1)
- Biosensor (1)
- Bone (1)
- Bor (1)
- Bug (1)
- CIGSe (1)
- CIGSe micro solar cells (1)
- Calcium compounds (1)
- Carbon (81.05.Uw) (1)
- Cell adhesion (1)
- Central Asia (1)
- Chalcopyrite (1)
- Colorimetry (1)
- Conduction bands (1)
- Conservation (1)
- Copper-indium-gallium-diselenide (1)
- Crystallization (1)
- Cultural heritage (1)
- DDT (1)
- Damage threshold (1)
- Decontamination (1)
- Defect model (1)
- Dentistry (1)
- Diamond-like carbon (1)
- Dielectrics (1)
- Diffusion (1)
- Doping thin films (1)
- Dünnfilm, diamantartig (1)
- Dünnfilmtechnologie (1)
- Editorial (1)
- Electrochemistry (1)
- Electromagnetic scattering (1)
- Ellipsometrie (1)
- European Materials Research Society (E-MRS) (1)
- FS-laser ablation (1)
- Fatigue (1)
- Fatigue testing (1)
- Femtosecond pulse laser (1)
- Femtosecond pulses (1)
- Femtosekundenlaser (1)
- Fiber waveguides (1)
- Fiber waveguides (42.81.Qb) (1)
- Filter (1)
- Fourier transforms (1)
- Glass (1)
- Glass transitions (1)
- Glasses (81.05.Kf) (1)
- Glucose (1)
- Gold films (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Heat affected zone (1)
- Hierarchical micro-nanostructures (1)
- Hydrocarbons (1)
- Indium (1)
- Indium islands (1)
- Indium phosphide (1)
- Industrial applications (1)
- Kohlenstoffschichten (1)
- LIDT (1)
- Laser Machining (1)
- Laser Processing (1)
- Laser beam machining (1)
- Laser damage (1)
- Laser impact on surfaces (1)
- Laser micromachining (1)
- Laser pulses (1)
- Laser treatment (1)
- Laser-Material-Bearbeitung (1)
- Laser-beam impact phenomena (1)
- Laser-induced forward transfer (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced nanostructures (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-material interactions (1)
- Laser-modified surface (1)
- Lizard (1)
- Materials processing (1)
- Mechanical stress (1)
- Melting (1)
- Membrane perforation (1)
- Metals (1)
- Michelson interferometer (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microconcentrator solar cell (1)
- Microscopy (1)
- Mikrobearbeitung (1)
- Molybdenum substrate (1)
- Multimode fiber (1)
- Ophthalmology (1)
- Optical breakdown (1)
- Optical coatings (1)
- Optical constants (78.20.Ci) (1)
- Optical fibers (1)
- Optical microscopy (1)
- Optical proper (1)
- Optische Konstanten (1)
- Orthopaedics (1)
- Oxide growth (1)
- Pacemaker (1)
- Papery (1)
- Parchment (1)
- Photoelektron spectroscopy (1)
- Physical vapor deposition (1)
- Pigments (1)
- Polarisation (1)
- Poly(methylmetacrylate) (1)
- Polycarbonate (1)
- Polyethylene (1)
- Polymers-radiation effects (1)
- Polymethylmethacrylate (1)
- Prosthetics (1)
- Protection housing (1)
- Pulse Laser (1)
- Pulse duration (1)
- Pulslaser (1)
- Radiation treatment (81.40.Wx) (1)
- Refractive index (1)
- Reproducibility (1)
- Rods (structures) (1)
- Scanning Auger electron microscopy (1)
- Second harmonic generation (SHG) (1)
- Secondary hazard (1)
- Semiconductor (1)
- Semiconductor electrode (1)
- Semiconductors (1)
- Silica (1)
- Silica glass (1)
- Silicon nitride (1)
- Silk (1)
- Silk Road (1)
- Single- and multi-shot ablation (1)
- Solar cell (1)
- Solid electrolyte interface (1)
- Solid-state plasma (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy (1)
- Spot size (1)
- Spring Meeting 2016 (1)
- Superconductivity (1)
- Surface plasmon polariton (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface superconductivity (1)
- Surface treatment (1)
- Textile (1)
- Thin films (1)
- Threshold of silicon (1)
- Ti-6Al-4V alloy (1)
- Ti6Al4V alloys (1)
- Ti:sapphire laser (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved measurements (1)
- Titanium alloy (1)
- Titanium alloys (1)
- Titanium nitride films (1)
- Treshold (1)
- Tungsten (1)
- Ultra-short pulse laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- Vanadium alloys (1)
- Wall paintings (1)
- Water (1)
- Wood (1)
- X-ray (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray spectrum (1)
- lossy materials (1)
- plasmon lifetime (1)
- surface plasmon polaritons (1)
Organisationseinheit der BAM
- 6 Materialchemie (25)
- 6.2 Material- und Oberflächentechnologien (25)
- 6.7 Materialsynthese und Design (3)
- 9 Komponentensicherheit (3)
- 9.5 Tribologie und Verschleißschutz (3)
- 4 Material und Umwelt (2)
- 4.1 Biologische Materialschädigung und Referenzorganismen (2)
- 6.1 Oberflächen- und Dünnschichtanalyse (2)
- 5 Werkstofftechnik (1)
- 5.1 Mikrostruktur Design und Degradation (1)
Paper des Monats
- ja (3)
In order to address the dynamics and physical mechanisms of LIPSS formation for three different classes of materials (metals, semiconductors, and dielectrics), two-color double-fs-pulse experiments were performed on Titanium, Silicon and Fused Silica. For that purpose a Mach–Zehnder interferometer generated polarization controlled (parallel or cross-polarized) double-pulse sequences at 400 nm and 800 nm wavelength, with inter-pulse delays up to a few picoseconds. Multiple of these two-color double-pulse sequences were collinearly focused by a spherical mirror to the sample surfaces. The fluence of each individual pulse (400 nm and 800 nm) was always kept below its respective ablation threshold and only the joint action of both pulses lead to the formation of LIPSS. Their resulting characteristics (periods, areas) were analyzed by scanning electron microscopy. The periods along with the LIPSS orientation allow a clear identification of the pulse which dominates the energy coupling to the material. For strong absorbing materials (Silicon, Titanium), a wavelength-dependent plasmonic mechanism can explain the delay-dependence of the LIPSS. In contrast, for dielectrics (Fused Silica) the first pulse always dominates the energy deposition and LIPSS orientation, supporting a non-plasmonic formation scenario. For all materials, these two-color experiments confirm the importance of the ultrafast energy deposition stage for LIPSS formation.
A bottom-up approach is presented for the production of arrays of indium islands on a molybdenum layer on glass, which can serve as micro-sized precursors for indium compounds such as copper-indium-gallium-diselenide used in photovoltaics. Femtosecond laser ablation of glass and a subsequent deposition of a molybdenum film or direct laser processing of the molybdenum film both allow the preferential nucleation and growth of indium islands at the predefined locations in a following indium-based physical vapor deposition (PVD) process. A proper choice of laser and deposition parameters ensures the controlled growth of indium islands exclusively at the laser ablated spots. Based on a statistical analysis, these results are compared to the non-structured molybdenum surface, leading to randomly grown indium islands after PVD.
The possibility to excite surface plasmon polaritons (SPPs) at the interface between two media depends on the optical properties of both media and geometrical aspects. Specific conditions allowing the coupling of light with a plasmon-active interface must be satisfied. Plasmonic effects are well described in noble metals where the imaginary part of the dielectric permittivity is often neglected ('perfect medium approximation (PMA)'). However, some systems exist for which such approximation cannot be applied, hence requiring a refinement of the common SPP theory. In this context, several properties of SPPs such as excitation conditions, period of the electromagnetic field modulation and SPP lifetime then may strongly deviate from that of the PMA. In this paper, calculations taking into account the imaginary part of the dielectric permittivities are presented. The model identifies analytical terms which should not be neglected in the mathematical description of SPPs on lossy materials. These calculations are applied to numerous material combinations resulting in a prediction of the corresponding SPP features. A list of plasmon-active interfaces is provided along with a quantification of the above mentioned SPP properties in the regime where the PMA is not applicable.
Bacterial biofilms pose serious problems in medical and industrial settings. One of the major societal challenges lies in the increasing resistance of bacteria against biocides used in antimicrobial treatments, e.g., via overabundant use in medicine, industry, and agriculture or cleaning and disinfection in private households. Hence, new efficient bacteria-repellent strategies avoiding the use of biocides are strongly desired. One promising route to achieve bacteria-repellent surfaces lies in the contactless and aseptic large-area laser-processing of technical surfaces. Tailored surface textures, enabled by different laser-processing strategies that result in topographic scales ranging from nanometers to micrometers may provide a solution to this challenge. This article presents a current state-of-the-art review of laser-surface subtractive texturing approaches for controlling the biofilm formation for different bacterial strains and in different environments. Based on specific properties of bacteria and laser-processed surfaces, the challenges of anti-microbial surface designs are discussed, and future directions will be outlined.
Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon
(2021)
Superficial amorphization and re-crystallization of silicon in <111> and <100> orientation after irradiation by femtosecond laser pulses (790 nm, 30 fs) are studied using optical imaging and transmission electron microscopy. Spectroscopic imaging ellipsometry (SIE) allows fast data acquisition at multiple wavelengths and provides experimental data for calculating nanometric amorphous layer thickness profiles with micrometric lateral resolution based on a thin-film layer model. For a radially Gaussian laser beam and at moderate peak fluences above the melting and below the ablation thresholds, laterally parabolic amorphous layer profiles with maximum thicknesses of several tens of nanometers were quantitatively attained. The accuracy of the calculations is verified experimentally by high-resolution transmission electron microscopy (HRTEM) and energy dispersive X-ray spectroscopy (STEM-EDX). Along with topographic information obtained by atomic force microscopy (AFM), a comprehensive picture of the superficial re-solidification of silicon after local melting by femtosecond laser pulses is drawn.
The exciting properties of micro- and nano-patterned surfaces found in natural species hide a virtually endless potential of technological ideas, opening new opportunities for innovation and exploitation in materials science and engineering. Due to the diversity of biomimetic surface functionalities, inspirations from natural surfaces are interesting for a broad range of applications in engineering, including phenomena of adhesion, friction, wear, lubrication, wetting phenomena, self-cleaning, antifouling, antibacterial phenomena, thermoregulation and optics. Lasers are increasingly proving to be promising tools for the precise and controlled structuring of materials at micro- and nano-scales. When ultrashort-pulsed lasers are used, the optimal interplay between laser and material parameters enables structuring down to the nanometer scale. Besides this, a unique aspect of laser processing technology is the possibility for material modifications at multiple (hierarchical) length scales, leading to the complex biomimetic micro- and nano-scale patterns, while adding a new dimension to structure optimization. This article reviews the current state of the art of laser processing methodologies, which are being used for the fabrication of bioinspired artificial surfaces to realize extraordinary wetting, optical, mechanical, and biological-active properties for numerous applications. The innovative aspect of laser functionalized biomimetic surfaces for a wide variety of current and future applications is particularly demonstrated and discussed. The article concludes with illustrating the wealth of arising possibilities and the number of new laser micro/nano fabrication approaches for obtaining complex high-resolution features, which prescribe a future where control of structures and subsequent functionalities are beyond our current imagination.
Effects of laser-induced periodic surface structures on the superconducting properties of Niobium
(2020)
It is well known that the use of ultrashort (fs) pulsed lasers can induce the generation of (quasi-) periodic nanostructures (LIPSS, ripples) on the surface of many materials. Such nanostructures have also been observed in sample’s surfaces irradiated with UV lasers with a pulse duration of 300 ps. In this work, we compare the characteristics of these nanostructures on 1-mm and on 25-μm thick niobium sheets induced by 30 fs n-IR and 300 ps UV pulsed lasers. In addition to conventional continuous or burst mode processing configurations, two-dimensional laser beam and line scanning modes have been investigated in this work. The latter allows the processing of large areas with a more uniform distribution of nanostructures at the surface. The influence of the generated nanostructures on the superconducting properties of niobium has also been explored. For this aim, magnetic hysteresis loops have been measured at different cryogenic temperatures to analyse how these laser treatments affect the flux pinning behaviour and, in consequence, the superconductor’s critical current values. It was observed that laser treatments are able to modify the superconducting properties of niobium samples.
Laser texturing is an emerging technology for generating surface functionalities on basis of optical, mechanical, or chemical properties. Taking benefit of laser sources with ultrashort (fs) pulse durations features outstanding precision of machining and negligible rims or burrs surrounding the laser-irradiation zone. Consequently, additional mechanical or chemical post-processing steps are usually not required for fs-laser surface texturing (fs-LST). This work aimed to provide a bridge between research in the field of tribology and laser materials processing. The paper reviews the current state-of-the-art in fs-LST, with a focus on the tribological performance (friction and wear) of specific self-organized surface structures (so-called ripples, grooves, and spikes) on steel and titanium alloys. On the titanium alloy, specific sickle-shaped hybrid micro-nanostructures were also observed and tribologically tested. Care is taken to identify accompanying effects affecting the materials hardness, superficial oxidation, nano- and microscale topographies, and the role of additives contained in lubricants, such as commercial engine oil.
In this contribution, chemical, structural, and mechanical alterations in various types of femtosecond laser-generated surface structures, i.e., laser-induced periodic surface structures (LIPSS, ripples), Grooves, and Spikes on titanium alloy, are characterized by various surface analytical techniques, including X-ray diffraction and glow-discharge optical emission spectroscopy. The formation of oxide layers of the different laser-based structures inherently influences the friction and wear performance as demonstrated in oil-lubricated reciprocating sliding tribological tests (RSTTs) along with subsequent elemental mapping by energy-dispersive X-ray analysis. It is revealed that the fs-laser scan processing (790 nm, 30 fs, 1 kHz) of near-wavelength-sized LIPSS leads to the formation of a graded oxide layer extending a few hundreds of nanometers into depth, consisting mainly of amorphous oxides. Other superficial fs-laser-generated structures such as periodic Grooves and irregular Spikes produced at higher fluences and effective number of pulses per unit area present even thicker graded oxide layers that are also suitable for friction reduction and wear resistance. Ultimately, these femtosecond laser-induced nanostructured surface layers efficiently prevent a direct metal-to-metal contact in the RSTT and may act as an anchor layer for specific wear-reducing additives contained in the used engine oil.