Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (17)
- Zeitschriftenartikel (16)
- Vortrag (9)
- Posterpräsentation (2)
- Dissertation (1)
Schlagworte
- Ray tracing (6)
- Betatron (4)
- Container inspection (4)
- Digital detector array (DDA) (4)
- Digital radiography (4)
- High-energy X-ray imaging (4)
- X-ray backscatter imaging (4)
- Anisotropy (3)
- Austenitic weld (3)
- Containerprüfung (3)
Eingeladener Vortrag
- nein (9)
Ultrasound propagation in inhomogeneous anisotropic materials is difficult to examine because of the directional dependency of elastic properties. Simulation tools play an important role in developing advanced reliable ultrasonic non destructive testing techniques for the inspection of anisotropic materials particularly austenitic cladded materials, austenitic welds and dissimilar welds. In this contribution we present an adapted 2D ray tracing model for evaluating ultrasonic wave fields quantitatively in inhomogeneous anisotropic materials. Inhomogeneity in the anisotropic material is represented by discretizing into several homogeneous layers. According to ray tracing model, ultrasonic ray paths are traced during its energy propagation through various discretized layers of the material and at each interface the problem of reflection and transmission is solved. The presented algorithm evaluates the transducer excited ultrasonic fields accurately by taking into account the directivity of the transducer, divergence of the ray bundle, density of rays and phase relations as well as transmission coefficients. The ray tracing model is able to calculate the ultrasonic wave fields generated by a point source as well as a finite dimension transducer. The ray tracing model results are validated quantitatively with the results obtained from 2D Elastodynamic Finite Integration Technique (EFIT) on several configurations generally occurring in the ultrasonic non destructive testing of anisotropic materials. Finally, the quantitative comparison of ray tracing model results with experiments on 32 mm thick austenitic weld material and 62 mm thick austenitic cladded material is discussed.
Quantitative evaluation of ultrasonic C-scan images in homogeneous and layered anisotropic austenitic materials is of general importance for understanding the influence of anisotropy on wave fields during ultrasonic non-destructive testing and evaluation of these materials. In this contribution, a three dimensional ray tracing method is presented for evaluating ultrasonic C-scan images quantitatively in general homogeneous and layered anisotropic austenitic materials. The directivity of the ultrasonic ray source in general homogeneous columnar grained anisotropic austenitic steel material (including layback orientation) is obtained in three dimensions based on Lamb's reciprocity theorem. As a prerequisite for ray tracing model, the problem of ultrasonic ray energy reflection and transmission coefficients at an interface between (a) isotropic base material and anisotropic austenitic weld material (including layback orientation), (b) two adjacent anisotropic weld metals and (c) anisotropic weld metal and isotropic base material is solved in three dimensions. The influence of columnar grain orientation and layback orientation on ultrasonic C-scan image is quantitatively analyzed in the context of ultrasonic testing of homogeneous and layered austenitic steel materials. The presented quantitative results provide valuable information during ultrasonic characterization of homogeneous and layered anisotropic austenitic steel materials.
Die Arbeitsgruppe 5 der Europäischen Föderation für Zerstörungsfreie Prüfung (EFNDT Working Group 5 „Public Security and Safety“, EFNDT WG 5) verfolgt weiterhin das Ziel, organisatorisch weit auseinanderliegende Zuständigkeiten und Arbeitsgebiete zusammenzuführen, die weitgehend mit gleichen, zumindest ähnlichen Prinzipien und Methoden arbeiten.
Auf der Suche nach neuen Wegen stoßen beide Seiten auf Gemeinsamkeiten. Dies gilt auch für neue Ansätze und Bewertungsmethoden von Techniken, mit denen Risiken vermindert werden sollen. Hierzu hat in Berlin ein Workshop im Oktober 2012 stattgefunden, auf dem parallele Projekte zur Container- und Frachtsicherheit zusammengeführt werden konnten. Herausgestellt wurde die Komplementarität der laufenden Projekte, gemeinsame Aspekte sollen künftig auch zusammen bearbeitet werden. Darüber hinaus wurden neue Methoden und Vorgehensweisen vorgestellt, aber auch die Sichtweise der Europäischen Kommission mit ihren Vorstellungen zu einem europäischen Markt für Sicherheitstechnik dargestellt. Angesprochen wurden bestehende und vorgeschlagene europaweite Regulierungen und das europäische Referenznetz zum Schutz kritischer Infrastrukturen (ERNCIP), welches ein Netzwerk von Laboratorien für den Test von Sicherheitstechnik zum Ziel hat. Auf technischem Sektor standen Methoden im Vordergrund, mit denen die Gesamtmenge eines Gefahrstoffes wie z.B. Sprengstoff erkannt werden können, und nicht nur Spuren als indirektem Hinweis. Die Arbeitsgruppe konnte somit erstmalig ein neutrales Forum für parallel laufende Projekte zur öffentlichen Sicherheit zur Verfügung stellen. Die auf den Workshops 2010 bis 2012 in Berlin gehaltenen Vorträge sind auf der EFNDT WG 5 – Webseite im geschützten Bereich zu finden.
Nicht alles davon ist geeignet, es der allgemeinen Öffentlichkeit zugänglich zu machen. Deshalb sind alle Vorträge aus den Workshops in einem passwortgeschützten Verzeichnis abgelegt. Die Erteilung des Passwortes erfolgt über den Convenor der Arbeitsgruppe durch die EFNDT. Eine Erweiterung dieser Struktur zu einem Austauschforum ist vorgeschlagen. Zur Teilnahme daran sind nicht nur Mitglieder in den Gesellschaften für zerstörungsfreien Prüfung eingeladen, sondern auch diejenigen, die in den Anwendungsgebieten zur öffentlichen Sicherheit tätig sind.
Ray tracing boundary value problems: simulation and SAFT reconstruction for ultrasonic testing
(2016)
The application of advanced imaging techniques for the ultrasonic inspection of inhomogeneous anisotropic materials like austenitic and dissimilar welds requires information about acoustic wave Propagation through the material, in particular travel times between two Points in the material. Forward ray tracing is a popular approach to determine traveling paths and arrival times but is ill suited for inverse problems since a large number of rays have to be computed in order to arrive at prescribed end points.
In this contribution we discuss boundary value problems for acoustic rays, where the ray path between two given points is determined by solving the Eikonal equation. The implementation of such a two Point boundary value ray tracer for sound field simulations through an austenitic weld is described and its efficiency as well as the obtained results are compared to those of a forward ray tracer. The results are validated by comparison with experimental results and commercially available UT simulation tools.
As an application, we discuss an implementation of the method for SAFT (Synthetic Aperture Focusing Technique) reconstruction. The ray tracer calculates the required travel time through the anisotropic columnar grain structure of the austenitic weld. There, the formulation of ray tracing as a boundary value Problem allows a straightforward derivation of the ray path from a given transducer Position to any pixel in the reconstruction area and reduces the computational cost considerably.
The synthetic aperture focusing technique (SAFT) is an imaging technique commonly used in ultrasonic inspection. In order to apply SAFT to the inspection of austenitic welds, the inhomogeneous anisotropic nature of the weld structure has to be taken into account. A suitable approach to accomplish this, is to couple the SAFT-algorithm with a ray tracing program (RT-SAFT). While SAFT-imaging of cracks in austenitic welds by use of ray tracing has been carried out before, all attempts so far were limited to longitudinal cracks which usually allows a treatment as 2-dimensional problem. In case of transverse cracks, a full 3-dimensional ray tracing is necessary in order to perform a SAFT-reconstruction. In this paper, we give an outline of our attempts to reconstruct images of transverse cracks in austenitic welds, utilizing 3-dimensional ray tracing and a layered structure model derived from an empirical model of grain orientations in welds. We present results of this RT-SAFT on experimental data taken from transverse cracks in different austenitic welds, which show that size and position of the cracks can be estimated with good accuracy, and compare them to images obtained by assuming an isotropic homogeneous medium which corresponds to the application of the classical SAFT-algorithm.
The objects of this investigation were sculptures taken from a ca. three hundred years old baroque epitaph of a church in Tonning, a town in Northern Germany. Around 1900 it was found in a disastrous state heavily damaged by wood-worm. At that time, the whole artwork was treated with the tar extract carbolineum as a remedy. Nowadays, this substance has been identified as carcinogenic, and its presence can be perceived by its stench and visually at certain spots on the surface where it has penetrated the covering paint.
A gold-painted sculpture of a massive wooden skull was interrogated with X-rays and fast neutrons to investigate the internal distribution of the carbolineum. The X-ray tomography, with its excellent spatial resolution revealed galleries left over from the worm infestation in the outer areas and cracks in the central region. The golden color coating appeared as a thick and dense layer. In comparison the tomography with fast neutrons, though being of lower resolution and yet unresolved artefacts revealed sections of slightly different densities in the bulk of the wood. These differences we attribute to the differences in the distribution of the impregnant in the wood, visible due to its higher hydrogen content making it less transparent for neutrons.
A comparative study on the performance of digital detector systems for high energy applications
(2014)
For cast components reaching or exceeding total material thicknesses of 150mm, high energy sources such as linear accelerators or Betatrons are required in order to obtain reasonable exposure times. In this study, the performance of digital detector systems, involving imaging plates (IP) and digital detector arrays (DDA), was evaluated with respect to the testing class B requirements as formulated in the standard EN ISO 17636-2. As a reference, traditional radiographic film and a Cobalt-60 source was used. With film exposures, testing class B was achieved with Co-60 and Betatron (7.5 MV) at longer exposure times. The preliminary results show that the testing class B was not obtained with the examined digital detector arrays (DDA) and the high resolution imaging plates (IP) , even at 40, 60 and 80 minutes exposure time with a 7.5 MV Betatron. Class A was achieved using high resolution imaging plates with optimized metal filters between object and IPs and a high resolution DDA with intermediate Cu filters. Class A was also achieved applying a DDA with lower basic spatial resolution than required by Table B.13 of EN ISO 17636-2, but using the compensation principle as described in this standard. The next generation of digital detector arrays might potentially be able to obtain class B performance with the expected spatial resolution and sensitivity improvements.