Filtern
Dokumenttyp
- Zeitschriftenartikel (3) (entfernen)
Referierte Publikation
- ja (3)
Schlagworte
Organisationseinheit der BAM
About 80% of all fire fatalities in Germany occur because of fires in homes. It has been known for some time that modern materials (synonym for materials consisting mostly of synthetic polymers) tend to burn differently from older materials (synonym for materials consisting mostly of fibrous cellulosic substances) and it has been acknowledged that the amount of combustible plastics in homes has increased significantly over the last decades. To investigate the influence of modern furniture and ventilation conditions of fires in homes, a series of four large-scale tests in two Living rooms (LRs) with adjacent rooms (ARs) was performed by BAM and the Frankfurt fire service. Two LRs, one with older furniture and one with modern furniture, were tested twice each. Each test started with the ignition of a paper cushion on an upholstered chair. The influence of modern materials on the fire development was investigated, as well as the influence of the ventilation on the fire development. In all settings, an upholstered chair was the first burning item. Results of the test series show that fires in rooms with modern furniture develop faster than fires in rooms with older furniture.
This is true for temperature development in the rooms as well as for smoke production.
Bei der Erstellung von brandschutztechnischen Nachweisen für Industriebauten werden häufig Ingenieurmethoden des Brandschutzes genutzt. Dazu zählen die Modellierung und Berechnung von Brandszenarien mittels numerischer Strömungsmechanik (computational fluid dynamics, CFD). In dieser Arbeit wurde ein auf numerischer Strömungs- und Strukturmechanik basierendes Verfahren zur brandschutztechnischen Bemessung von Bauteilen am Beispiel einer Industriehalle angewendet. Instationäre Temperaturverläufe aus der Heißgasschicht dienten dabei als Eingangswerte für die Bauteilberechnung. Aus den Ergebnissen wurde die äquivalente Branddauer berechnet, mit der die rechnerisch erforderlichen Feuerwiderstandsdauern der Bauteile bestimmt werden konnte.
Gegenstand des Aufsatzes ist die experimentelle Untersuchung der Auswirkungen verschiedener Zündquellen sowie der Systembeschaffenheit auf das Brandverhalten EPS-basierter Wärmedämm-Verbundsysteme (WDVS). Dazu wurden Brände ausgewertet, die mit EPS-basierten WDVS in Verbindung stehen. Ergebnis dieser Auswertung war, dass nicht wie bisher angenommen der Brand in dem Gebäude (z. B. der Wohnungsbrand), sondern vielmehr der Brand außerhalb des Gebäudes, insbesondere der des Abfallbehälters, das häufigste und kritischste Brandszenario für EPS-basierte WDVS darstellt. Daraufhin wurden an der BAM Bundesanstalt für Materialforschung und -prüfung Brandversuche in der Single Burning Item-Prüfeinrichtung (SBI) an nicht intakten EPS-basierten WDVS-Ausschnitten durchgeführt. Mit zunehmender Beschädigungsgröße und -tiefe stieg die vom System freigesetzte Wärmefreisetzungsrate an. Zusätzlich werden Brandversuche eines Sockelbrandszenarios mit einer abfallbehälteräquivalenten Brandlast vorgestellt. Aus den Brandversuchen werden Empfehlungen zur Verbesserung der Systemsicherheit abgeleitet.-------------------------------------------------------------------------------------------------------------------------------------------------
The influence of different ignition sources and conditions of the systems on the fire behaviour of external thermal insulating systems (ETICS) have been investigated experimentally. As a basis of the investigations real cases with EPS based ETICS have been analysed. The analysis showed that the fire in front of the building is the most common and critical fire scenario for these systems. These fires are often caused by waste containers. This result contradicts the former common assumption that the fire inside the building is the most critical fire scenario for ETICS. Intermediate scale experiments in the Single Burning Item (SBI) test apparatus have been performed at BAM with ETICS specimens. The render of the systems was partially damaged. The measured heat release rate of the specimens increased significantly with size and depths of the damages. Additionally results of large scale experiments with a waste container equivalent ignition source are presented and recommendations to enhance fire safety of these systems are given.