Filtern
Dokumenttyp
Referierte Publikation
- ja (3)
Schlagworte
- Wiedernutzung (2)
- Dickenmessung (1)
- Entscheidung (1)
- Foundation reuse (1)
- Fundament (1)
- Fundamente (1)
- Parallel seismic (1)
- Pfahlgründungen (1)
- Pfahlintegrität (1)
- Pile integrity testing (1)
Organisationseinheit der BAM
The re-use of foundations on urban sites contributes to the Sustainable Development in construction. Investigations at potential parts to be re-used should be performed in time to influence the planning process. Non-destructive testing methods in civil engineering (NDT-CE) provide necessary information about location, dimension and condition of existing foundations. Thickness measurement of foundation slabs, imaging of their geometry is dealt with as well as localisation of voids and reinforcement beyond surface-near layers. For pile foundations this article introduces NDT-CE methods to measure the pile length or deviation of an expected length as well as to determine the pile integrity. Practical examples of typical testing problems are given and show the possibilities as well as limits of a method. This guidance enables the planning engineer to consider the use of NDT-CE methods and to assure their successful application.
The reuse of existing foundations is considered in various construction Projects to save time and costs while avoiding unnecessary interference with other underground objects. Because the design and as-built drawings might not be complete and questions may arise regarding the condition of the foundations, a detailed investigation is a prerequisite for the planning process in most cases. Nondestructive testing (NDT) techniques are a core part of this endeavor.
The processes and procedure for foundation reuse planning are not yet standardized, and the possibilities and limitations of NDT methods are not known to many planners and stakeholders. The German research Project REFUND (2014–2016) has developed charts for the planning and Investigation process that consider available standards and the current state of the art in NDT.
These charts are separately available for single and strip, slab, and pile foundations. Available NDT methods have been compiled and evaluated for specific tasks at these foundation types, including their respective limitations.
The procedures have been successfully tested in two real-world projects. The results from these projects enable planners to improve the reliability of the process while potentially saving significant resources. This paper discusses the procedures for pile foundations and demonstrates the use of various NDT methods in a project on the reuse of electrical tower foundations.
Vor einer geplanten Weiter- oder Wiedernutzung von Bestandsgründungen stellt sich die Frage nach deren Lage, Geometrie und Zustand im Untergrund. Hierfür gibt es verschiedene Prüfverfahren. Die Abläufe bei Planung und Prüfung sind jedoch bisher nicht standardisiert und die Möglichkeiten bzw. Grenzen der Prüfverfahren den Planern wenig bekannt. Im Forschungsprojekt REFUND (2014–2016) wurden unter Berücksichtigung der aktuellen Normen und des Stands der Technik Ablaufdiagramme für die Planung der Wiedernutzung sowie die Untersuchung des Bestands entwickelt.
Dies geschah getrennt für Einzel- und Streifenfundamente, Platten und Pfähle. An zwei Praxisbeispielen wurden die Abläufe getestet und optimiert. Die Ergebnisse wurden in einem Handbuch zusammengefasst. Es soll Planer und andere Verantwortliche bei der wirtschaftlich und technisch optimierten Durchführung von Wiedernutzungsprojekten unterstützen.