Filtern
Dokumenttyp
- Zeitschriftenartikel (6)
- Beitrag zu einem Tagungsband (5)
- Forschungsbericht (2)
- Monografie (1)
Schlagworte
- Leaching (3)
- Elutionsverhalten (2)
- Lysimeter (2)
- Ageing (1)
- Analyseverfahren (1)
- Analytical methods (1)
- Antimony (1)
- Artificial turf (1)
- Artificial weathering (1)
- Athletic tracks (1)
Organisationseinheit der BAM
Im Rahmen eines ZIM-geförderten Projektes wurde eine nass-mechanische Aufbereitung von Hausmüllverbrennungsasche (HMVA) hinsichtlich der Mengen und der Qualitäten generierter Fraktionen optimiert. Dabei standen besonders die Qualitäten der mineralischen Fraktionen, die mengenmäßig den größten Anteil darstellen, im Vordergrund, da sie für einen möglichen Einsatz als Baustoff nutzbar gemacht werden sollen. Insbesondere die Chlorid- und Sulfatgehalte sollten dafür reduziert werden. Durch die BAM wurde im Projekt u. a. die Freisetzung von umweltrelevanten Stoffen in den mineralischen Fraktionen untersucht. Dafür wurden Schütteleluate als Übereinstimmungstest und Eluate aus Lysimeterversuchen im Labormaßstab zur Bewertung des Langzeitverhaltens auf ihre Inhaltsstoffe analysiert.
Sub-aerial biofilms (SAB) are ubiquitous, self-sufficient microbial ecosystems found on mineral surfaces at all altitudes and latitudes. SABs, which are the principal causes of weathering on exposed terrestrial surfaces, are characterized by patchy growth dominated by associations of algae, cyanobacteria, fungi and heterotrophic bacteria. A recently developed in vitro system to study colonization of rocks exposed to air included two key SAB participants - the rock-inhabiting ascomycete Knufia petricola (CBS 123872) and the phototrophic cyanobacterium Nostoc punctiforme ATCC29133. Both partners are genetically tractable and we used them here to study weathering of granite, K-feldspar and plagioclase. Small fragments of the various rocks or minerals (1–6 mm) were packed into flow-through columns and incubated with 0.1% glucose and 10 μM thiamine-hydrochloride (90 μL min−1) to compare weathering with and without biofilms. Dissolution of the minerals was followed by: (i) analysing the degradation products in the effluent from the columns via Inductively Coupled Plasma Spectroscopy and (ii) by studying polished sections of the incubated mineral fragments/grains using scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray analyses. K. petricola/N. punctiforme stimulated release of Ca, Na, Mg and Mn. Analyses of the polished sections confirmed depletion of Ca, Na and K near the surface of the fragments. The abrupt decrease in Ca concentration observed in peripheral areas of plagioclase fragments favored a dissolution-reprecipitation mechanism. Percolation columns in combination with a model biofilm can thus be used to study weathering in closed systems. Columns can easily be filled with different minerals and biofilms, the effluent as well as grains can be collected after long-term exposure under axenic conditions and easily analyzed.
Column tests are a common tool to investigate the leaching behavior of contaminated soil and waste materials. In contrast to inorganic analytes, fewer studies with organic contaminants are available based on column tests. This paper is aimed at the question if soil materials contaminated with organic pollutants can be reliably investigated by column tests. Soils contaminated with TPH (total petrol hydrocarbons), PFC (perfluorinated surfactants) and the biocide tebuconazole were used for column percolation tests. Differences in the leaching behavior are mainly driven by partitioning behavior between organic carbon and water, which can be estimated from log KOW values and size and shape of molecules. PFC show higher release (10–50% for individual compounds) than pesticides (3.7–5.3%) and TPH (< 1%) at liquid to solid ratio of 4 l/kg. All eluate concentrations are low with maximum concentrations of 50 µg/l for PFC and 1–2 mg/l for pesticides and TPH. Despite this, the observed standard deviations are quite small suggesting good repeatability. In general the observed concentration trends are similar to that from lysimeter studies found in the literature and thus, it can be concluded that laboratory column experiments are a reliable tool for organic compounds with various physico-chemical properties.
Die Normung von Analyseverfahren ermöglicht, dass Parameter unter standardisierten Bedingungen qualitätsgesichert ermittelt werden können. Insbesondere dann, wenn Verfahren in gesetzliche Regelwerke einfließen, ist es notwendig, dass die Ergebnisse sicher und vergleichbar sind und der Aufwand im Vollzug vertretbar ist. Derzeit werden viele Parameter in verschiedenen Verordnungen nach unterschiedlichen genormten Verfahren analysiert, was die Überwachungsarbeit erschwert und zudem unnötig teurer macht. Aus diesem Grund wir eine sogenannte horizontale Normung angestrebt, bei der geeignete Analyseverfahren auch Matrices-übergreifend genormt und anschließend EU-weit zitiert werden können. Grundvoraussetzung für die Verabschiedung als Norm ist die Validierung der Verfahren. Bereits vor einigen Jahren erteilte die EU ein Mandat an CEN (Europäisches Komitee zur Normung), um umweltrelevante Parameter Matrices-übergreifend zu validieren. Allerdings konnten nicht alle für diverse Verordnungsnovellen (z.B. Klärschlammverordnung) wichtigen Parameter im Rahmen dieses Projekts validiert werden. Aus diesem Grund wurde das aktuelle Vorhaben in den Umweltforschungsplan des BMUB aufgenommen und von der BAM durchgeführt. Im Forschungsvorhaben konnten im Bereich der anorganischen Parameter die CEN/TS 16170 (Elemente mit ICP-OES), CEN/TS 16171 (Elemente mit ICP-MS) und CEN/TS 16175-2 (Quecksilber mit CV-AFS) sowie im Bereich der organischen Parameter die CEN/TS 16181 (PAK mit HPLC und GC), die CEN/TS 16167 (PCB mit GC-MS und GC-ECD) und die CEN/TS 16190 (Dioxine, Furane und dl-PCB mit HR-GC-MS) für die Analyse von Klärschlamm, behandeltem Bioabfall und Boden erfolgreich validiert werden. Die validierten Verfahren stehen nun kurz vor der Verabschiedung als EN (Europäische Norm).
Dieses Buch ist die Fortstzung des 2012 ebenfalls in der Schriftenreihe des Bundesinstituts für Sportwissenschaft (2012,02) erschienenen Berichts zum Thema "Umweltverträglichkeit von Kunststoff- und Kunststoffrasenbelägen auf Sportfreianlagen". Bei der ersten Untersuchung lag der Focus auf der Entwicklung von Testmethoden im Labormaßstab, die eine Bewertung des Schadstoffaustrags und des möglichen Gefahrenpotentials für Mensch und Umwelt ermöglichen. Folgerichtig setzte sich das aktuelle Projekt nun mit der Modellierung der Stofffreisetzung auseinander. Diese ist Voraussetzung für eine Bewertung der Boden- und Grundwasserverträglichkeit der untersuchten Sportbodensysteme.
Kurzfassung
Die Umweltverträglichkeit reaktiver Brandschutzbeschichtungen wurde anhand einer Kombination von Auslaugprüfungen und nachfolgender Ökotoxizitätstestung bewertet. Hierzu wurden drei repräsentative reaktive Brandschutz-beschichtungssysteme, die vom Anwendungsbereich her einer direkten Bewitterung ausgesetzt sein können, untersucht. Der Aufbau bestand aus einem Stahlkörper, der Grundierung, einem Haftvermittler, der reaktiven Komponente sowie einem Deckanstrich. Die Prüfkörper wurden in Auslaugversuche nach DIN EN 16105 (Intermittierender Wasserkontakttest mit 9 Immersionszyklen je 1 h Tauchen, 4 h Trocknung und erneut 1 h Tauchen, Flüssig-zu-Flächen (L/A) Verhältnis 25 L/m²) und CEN/TS 16637-2 (Horizontale dynamische Oberflächenauslaugprüfung, DSLT, 8 Fraktionen mit einem L/A Verhältnis von 25 L/m²) getestet. Nachfolgend wurden die DSLT-Eluate hinsichtlich ihrer ökotoxischen Effekte im Algentest (DIN EN ISO 8692), Daphnientest (DIN EN ISO 6341), Fischeitest (DIN EN ISO 15088), Leuchtbakterientest (DIN EN ISO 11348-2) und umu-Test (ISO 13829) sowie bei einem TOC über 10 mg/L im Respirometertest (OECD 301 F) untersucht. Es wurden je eine Eluatmischung der beiden ersten DSLT-Fraktionen sowie ein Eluat nach längerer Exposition (Fraktion 7) untersucht. Zusätzlich wurden Blindwertkontrollen über das gesamte Verfahren mitgetestet.
In den DSLT-Eluaten wurden mit Ausnahme von Zink (Zn) und Barium (Ba) geringe Konzentrationen an Kationen bestimmt. Im GC-MS Screening wurden insbesondere Phenol, 1-Methoxypropylacetat und Benzaldehyd detektiert. Der TOC war in der Fraktion 1 und 2 (Gesamtelutionsdauer 24 h) deutlich geringer, als in der 7. Fraktion (Gesamtelutionsdauer 36 Tage). Als Grund sind ein Aufweichen der Beschichtung sowie die um Faktor 20 verlängerte Kontaktzeit zu nennen. Die Ökotoxizitäten stiegen in der 7. Fraktion deutlich an und erreichten im Leuchtbakterientest Werte bis zu LIDL = 256, während in den vereinigten 1. und 2. Fraktionen lediglich bis zu LIDL=24 bestimmt wurden. Der Daphnientest sprach nur in der 7. Fraktion eines Herstellers an (LIDD = 8), der Fischeitest zeigte in keinem Eluat Effekte. Keine der Proben war im umu-Test gentoxisch. Die Eluate der Fraktion 7 zeigten eine deutliche Abbaubarkeit der organischen Inhaltsstoffe von 69 bis 88%.
Im intermittierenden Tauchtest wurden nur geringe Konzentrationen an Kationen und Anionen im Eluat nachgewiesen. Die berechneten kumulativen Freisetzungen bewegen sich zwischen 10 und 54 mg/m² für Phosphat, zwischen 0,3 und 3 mg/m² für Zn sowie zwischen 0,2 und 0,7 mg/m² für Ba. Im Gegensatz zum DSLT lagen die TOC-Werte der Eluate deutlich niedriger (bis 5 mg/L) und nahmen mit Zunahme der Versuchsdauer ab.
Es wurden Vorschläge für ein geeignetes Untersuchungskonzept für reaktive Brandschutzbeschichtungen erarbeitet.
Draft standards for the determination of organic pollutants in the solid matter of environmental matrices such as sludge, treated biowaste and soil have been basically developed in the framework of the European standardization project HORIZONTAL. A research project financed by the German Federal Environment Agency was initiated to finalize some of these CEN standard drafts, since fully validated standard procedures are crucial for the evaluation of their reliability in the context of implementation in legislation on environmental health.
Approach: Appropriate test materials (< 2mm particle size) were prepared and homogenized from contaminated soils, sludge and treated biowaste containing polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB), dioxins, furans and dioxin-like-PCB and served, along with reference solutions, as the basis for international interlaboratory comparisons. Performance data of three analytical standard procedures were obtained by the statistical evaluation of results received from 11 to 29 participants per test material.
Results: The overall variation coefficients of reproducibility (between-lab standard deviations) for the sum parameters were roughly between 10 and 35 %. The variation coefficients of repeatability (within-lab standard deviations) range between 3 % and 8 % and show no trend considering the substance groups or matrices.
The highest coefficients of reproducibility were found for the analysis of PAHs, which were between 26 and 35 %, depending on the matrix, whereas 7-17 % reproducibility was observed for toxicity equivalents (TEQ) comprising dioxins, furans and dl-PCB.
Conclusions: Overall, the results confirm that the procedures described in the Technical Specifications are fit for purpose for all three matrices and that the feasibility of the HORIZONTAL approach, to cover several matrices with one standard per analyte, was thereby proven.
In order to estimating the amount and kind of emissions from polymeric sporting tracks a laboratory test was developed in BAM that combines artificial weathering and subsequent batch and column tests [1, 2, 3]. The goal consisted in nvestigating a possible change of emissions into soil and groundwater of a new sporting ground as a function of ageing and egradation of the system. At various stages of the weathering, the samples were removed and subjected to especially designed column extraction tests for the solid samples. Both these extracts and the accumulated rainwater run-off of the weathering device were subjected to analytical tests of their ingredients. The overall aim of the test consisted in developing ontrollable, reproducible, and standardisable conditions and methods of investigation that would allow an estimation of the emissions in the course of outdoor application of about five years.