Filtern
Dokumenttyp
Sprache
- Englisch (2)
Referierte Publikation
- ja (2)
Schlagworte
- Absolute isotope ratio (1)
- Explosion overpressures (1)
- Flame propagation (1)
- Gas concentration (1)
- Hydrocarbon fuel-air explosion (1)
- Lead isotope ratios (1)
- Metrology (1)
- Obstacle location (1)
- Traceability (1)
Organisationseinheit der BAM
Experiments were conducted in a semi-confined pipe to investigate the effects of obstacle location and gasoline vapor concentration on gasoline-air fuel explosions. The variations of internal overpressure, external overpressure, flame propagation and flame-overpressure coupling relationship were analyzed. The results showed thatthe internal overpressure histories existed three obvious peaks, and when the obstacle location was set at 0.4 m, the maximum absolute values of overpressure (pmax and pneg), overpressure rise rates ((dp/dt)ave and (dp/dt)max) and the deflagration index (KG) were obtained. Additionally, more than two positive overpressure peaks were observed in the external overpressure histories. The maximum values of external overpressures and overpressure rise rates were obtained at the obstacle location of 0.4 m. For the fuel concentrations of 1.3%,.1.7% and 2.1%, the shortest time to reach pmax appeared at the obstacle location of 0.4 m, 0.2 m and 0.6 m, respectively, while the shortest time to reach (dp/dt)max and the maximum flame propagation speed were obtained for all the fuel concentrations at the obstacle location of 0.2 m. Moreover, a coupling relationship between overpressure and flame propagation was found. lt could be tleduced that the formation of the positive overpressure peak ofthe external overpressure might be directly related to the gas explosion inside the pipe and the flow jet caused by the high-speed flame propagation. rat her than the external explosion (or secondary explosion) out of the pipe. These results improve our understanding on gas explosion dynamics in a semi- confined space.
The determination of the mass fractions of bromide, sulfate, and lead as well as the isotopic composition of the lead (expressed as the molar mass and the amount fractions of all four stable lead isotopes) in an aqueous solution of sodium chloride with a mass fraction of 0.15 g/g was the subject of this comparison. Even though the mass fractions ranged from 3 μg/g (bromide) to 50 ng/g (lead), almost all results reported agreed with the according KCRVs.