Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (20)
- Beitrag zu einem Tagungsband (18)
- Vortrag (10)
- Forschungsbericht (4)
- Buchkapitel (1)
- Sonstiges (1)
- Posterpräsentation (1)
Schlagworte
- Brandschutz (20)
- Reaktive Brandschutzsysteme (15)
- Feuerwiderstand (13)
- Brandversuche (8)
- Stahl (7)
- Zugglieder (7)
- Fire test (6)
- Reaktives Brandschutzsystem (6)
- Dauerhaftigkeit (5)
- Stahlbau (5)
Organisationseinheit der BAM
Paper des Monats
- ja (1)
Eingeladener Vortrag
- nein (10)
Die Verwendung von Endlosfilamenten aus Carbon als Be-wehrungsmaterial für Beton, sogenannter Textilbeton, bietet die Möglichkeit der Sanierung und der Verstärkung bestehender Stahlbetonkonstruktionen. Dabei muss die Frage nach dem Feuerwiderstand von derart verstärkten Tragwerken be-antwortet werden. Aufschluss darüber liefern Brandversuche. Mit Textilbeton verstärkte Stahlbetonplatten haben in Brandversuchen nach der Einheits-Temperaturzeitkurve bei 33 % der Traglast mehr als 60 Minuten standgehalten. Bei 50 % der Traglast kam es nach einer Branddauer von 55 Minuten, bei 65 % nach 30 Minuten, zu einem Zugversagen der textilen Verstärkungsschicht. Bei während des Brandes unbelasteten bzw. gering belasteten Platten lagen die im Anschluss ermittelten Resttragfähigkeiten bei 65 % der Bruchlast nach 30 Minu-ten Branddauer bzw. bei 50 % der Bruchlast nach 60 Minuten Branddauer. Wäh-rend und nach der Beflammung waren zunehmende Durchbiegungen und Rissbreiten erkennbar. Es traten aber keine Abplatzungen auf, weshalb die Ver-stärkungsschicht aus Textilbeton als zusätzliche Betondeckung für die Stahlbe-wehrung angerechnet werden kann. Diese außerordentlich positiven Ergebnisse zeigen, dass für verstärkte Konstruktionen Feuerwiderstandsklassen von F60 bzw. R60 ohne zusätzliche Maßnahmen erreicht werden können. Dies ist von ho-her Relevanz für die wirtschaftliche Anwendung dieser Verstärkungsmethode. Für ein umfassendes Verständnis der Interaktion zwischen den Bewehrungen Textil und Stahl sowie der Versagensmechanismen während des Brandes, sind weitere Erkenntnisse über die mechanischen Eigenschaften von Textilbeton im Hochtemperaturbereich nötig. Auch der Einfluss der Oxidation des Carbons konnte nicht abschließend beurteilt werden. 354 HOTHAN und EHLIG: Hochtemperaturverhalten von Stahlbetonplatten mit TRC-Verstärkung Summary: Using endless carbon filaments for concrete reinforcement, so called textile reinforced concrete, the possibility of reconstruction and strengthening of existing concrete structures arises. The question concerning fire resistance of structures strengthened like this has to be answered. Fire tests provide answers. Steel reinforced concrete slabs strengthened with textile reinforced concrete load-ed with 33 % of ultimate load survived an ISO-fire for 60 minutes. Loaded with 50 % and 65 % of ultimate load the slabs failed after 55 minutes and 30 minutes of fire exposure due to tension failure of the textile reinforcement layer. Slabs not loaded or with a low load level during fire exposure showed remaining bearing resistances of 65 % of ultimate load after 30 minutes and 50 % of ultimate load after 60 minutes of fire exposure. During and after fire exposure rising deflec-tions and growing crack widths were observed. However no spalling occurred. Therefore the textile reinforced concrete layer can be taken into account as con-crete covering for the steel reinforcement. Those extraordinary positive results document, that reinforced concrete structures with additional fibre reinforced concrete can achieve fire resistance classes of R60 without additional provisions. To achieve comprehensive understanding of interaction between steel and fibre reinforcement and failure mechanisms in case of fire more knowledge concerning the mechanic properties of fibre reinforced concrete at high temperatures is es-sential. The influence of oxidation of the carbon fibres could not fully be an-swered.
Thin layers of textile reinforced concrete (TRC) can be used as strengthening for reinforced concrete (RC) slabs or beams to increase their foad-bearing capacity. The concrete matrix consists of a fine-grained concrete with a thickness of 8 to 15 mm. Information on the behaviour of strengthened structures subjected to fire is of particular inlerest for practical applications of this innovative construction method. A total of 7 RC slabs with Steel reinforcement were produced: 2 slabs were used as reference and 5 slabs were strengthened with three layers of textile reinforcement. Ultimate capacity of reference slabs and particular TRC strengthened slabs was determined from statie load results fom 4-point-bending tests.
Fire tests on these slabs were carried out with utilization fectors using a Standard temperature curve (ISO-834-1) for fire testing. Test loads varied between 0 % and 65 % ofuMmate load.
To detect temperatures during fire exposure thermocouples were arranged throughout the cross-section of the slabs. Depending on the utilization the slabs were exposed to fire for 30 minutes or for 60 minutes. In some cases bending fäilure occurred, in other cases the slabs survived. None of the specimens exhibited any visual damage or concrete spalling during fire exposure. Results of deformation measurements and residual strength measurements are presented. Even though mechanisms are not fifily understood, it is important to discuss the presumable reasons for the surprisingiy positive test results. It is presumed tbat the key mechanisms contributing to the outstanding fire resistance capability presented are: superior crack control of the TRC and load redistribution between textile and Steel reinforcement as well as the primary load transfer directly into the slabs.
Die hier vorgestellten Untersuchungen dienen der Erweiterung des Anwendungsbereiches für reaktive Brandschutzsysteme auf Stahlbauteilen im nationalen Zulassungsverfahren.
Für die Wirksamkeit reaktiver Brandschutzsysteme ist die Haftfähigkeit der reaktiven Brandschutzbeschichtung auf dem Untergrund (Stahl) von entscheidender Bedeutung. Die Haftfähigkeit der Beschichtung ist neben der Oberflächenbeschaffenheit und den Eigenschaften des reaktiven Systems selbst im Wesentlichen von der Form des Bauteils und den sich im Brandfall einstellenden erformungen (Krümmungen und Dehnungen) abhängig.
Reaktive Brandschutzsysteme werden in zunehmendem Maße zum Schutz von sichtbaren Stahlkonstruktionen eingesetzt, weil mit den relativ geringen Beschichtungsdicken das architektonische Erscheinungsbild der Konstruktionen erhalten bleibt. Die Verwendbarkeit der Systeme wird durch nationale und europäische technische Zulassungen geregelt. Die Zulassungen erlauben eine Anwendung auf zugbeanspruchten Bauteilen nur unter Einschränkungen. Eine Verwendung der Systeme auf Zuggliedern mit Vollquerschnitt ist derzeit nicht abgedeckt. Dieser Beitrag beschreibt die aktuelle Situation zur Anwendung reaktiver Brandschutzsysteme und erläutert die physikalisch-technischen Hintergründe. Ferner wird anhand eines Beispiels außerhalb des Anwendungsbereiches der Zulassungen gezeigt, wie eine Anwendung auf Zuggliedern mit rundem Vollquerschnitt im Rahmen einer Zustimmung im Einzelfall ermöglicht werden kann. In einem weiteren Abschnitt werden die jüngsten Forschungsergebnisse aus einem durch das Deutsche Institut für Bautechnik geförderten und durch die Bundesanstalt für Materialforschung und -prüfung bearbeiteten Vorhabens vorgestellt. Das Forschungsvorhaben verfolgt das Ziel, eine Anwendung reaktiver Brandschutzsysteme auf Zuggliedern mit Vollquerschnitten auf Grundlage von Zulassungen allgemein zu ermöglichen.-------------------------------------------------------------------------------------------------------------------------------
The application of intumescent coatings for fire protection of steel constructions is increasing. Thanks to the relative thin thickness of the coatings, the typical visual appearance of the structures can be preserved. The applicability of the systems is regulated by the national German as well as European technical approvals. According to the approvals, the application on steel members in tension is only allowed with limitations. Especially, the application on solid steel rods in tension is currently not yet covered. This contribution first explains the actual state of the art of the application of reactive fire protection systems to steel structures. Technical background information is provided. Furthermore, a case study is presented in order to illustrate the limitations in the scope of the approvals and a possible approach to allow the application of intumescent coatings on solid steel rods via an approval for a specific construction project. After that, the latest scientific results of a research project funded by the German National Institute of Building Technology (DIBt) and conducted by the Federal Institute for Materials Research and Testing (BAM) are described. The objective of the project is to enable the application of intumescent coatings on solid steel rods in tension within the scope of approvals in general.
The application of intumescent coatings for fire protection of steel constructions is increasing.
Thanks to the relative thin thickness of the coatings, the typical visual appearance of the
structures can be preserved. In Germany, the applicability of the systems is regulated by the
national as well as European technical approvals. According to the approvals, the application
on steel members in tension is only allowed with limitations. Especially, the application on
solid steel rods in tension is currently not covered. The paper will explain the actual state of
the art of the application of reactive fire protection systems applied to steel structures.
Physical and technical background information will be provided. After that, the latest
scientific results of an on-going research project funded by the German National Institute of
Building Technology (DIBt) and conducted by the Federal Institute for Materials Research
and Testing (BAM) will be described.
Über die Entwicklung von Anwendungsregeln für reaktive Brandschutzsysteme auf Stahlzuggliedern
(2014)
Der vorliegende Beitrag stellt den Entwicklungsstand von Anwendungsregeln für reaktive Brandschutzsysteme auf Stahlzuggliedern zusammenfassend dar. Dabei wird insbesondere auf die jüngsten Veränderungen in den normativen Grundlagen und bauaufsichtlichen Regelungen eingegangen und im Hinblick auf Sicherheitsaspekte bewertet.
Die Verringerung der Teilsicherheit für den Bauteilwiderstand nicht stabilitätsgefährdeter Bauteile im Regelwerk für die Kaltbemessung von Stahltragwerken ist hier als besonders kritisch anzusehen, da hierdurch ein systematisches Sicherheitsdefizit für den Brandfall verursacht wird.
Weiterhin werden neuste Forschungsergebnisse bei der Entwicklung von Bewertungsregeln von reaktiven Brandschutzsystemen auf Vollkreisprofilen unter Zugbeanspruchung vorgestellt und diskutiert. Die Untersuchungen behandeln die Fragestellung, inwieweit Prüfungen mit Zugbeanspruchungen an Kreisvollprofilen erforderlich sein werden.