Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (20) (entfernen)
Schlagworte
- Brandschutz (8)
- Reaktive Brandschutzsysteme (6)
- Brandversuche (5)
- Fire test (4)
- Stahl (4)
- Intumescent coating (3)
- Reactive fire protection system (3)
- Zugglieder (3)
- Concrete (2)
- Feuerwiderstand (2)
Organisationseinheit der BAM
Paper des Monats
- ja (1)
Reaktive Brandschutzsysteme werden in zunehmendem Maße zum Schutz von sichtbaren Stahlkonstruktionen eingesetzt, weil mit den relativ geringen Beschichtungsdicken das architektonische Erscheinungsbild der Konstruktionen erhalten bleibt. Die Verwendbarkeit der Systeme wird durch nationale und europäische technische Zulassungen geregelt. Die Zulassungen erlauben eine Anwendung auf zugbeanspruchten Bauteilen nur unter Einschränkungen. Eine Verwendung der Systeme auf Zuggliedern mit Vollquerschnitt ist derzeit nicht abgedeckt. Dieser Beitrag beschreibt die aktuelle Situation zur Anwendung reaktiver Brandschutzsysteme und erläutert die physikalisch-technischen Hintergründe. Ferner wird anhand eines Beispiels außerhalb des Anwendungsbereiches der Zulassungen gezeigt, wie eine Anwendung auf Zuggliedern mit rundem Vollquerschnitt im Rahmen einer Zustimmung im Einzelfall ermöglicht werden kann. In einem weiteren Abschnitt werden die jüngsten Forschungsergebnisse aus einem durch das Deutsche Institut für Bautechnik geförderten und durch die Bundesanstalt für Materialforschung und -prüfung bearbeiteten Vorhabens vorgestellt. Das Forschungsvorhaben verfolgt das Ziel, eine Anwendung reaktiver Brandschutzsysteme auf Zuggliedern mit Vollquerschnitten auf Grundlage von Zulassungen allgemein zu ermöglichen.-------------------------------------------------------------------------------------------------------------------------------
The application of intumescent coatings for fire protection of steel constructions is increasing. Thanks to the relative thin thickness of the coatings, the typical visual appearance of the structures can be preserved. The applicability of the systems is regulated by the national German as well as European technical approvals. According to the approvals, the application on steel members in tension is only allowed with limitations. Especially, the application on solid steel rods in tension is currently not yet covered. This contribution first explains the actual state of the art of the application of reactive fire protection systems to steel structures. Technical background information is provided. Furthermore, a case study is presented in order to illustrate the limitations in the scope of the approvals and a possible approach to allow the application of intumescent coatings on solid steel rods via an approval for a specific construction project. After that, the latest scientific results of a research project funded by the German National Institute of Building Technology (DIBt) and conducted by the Federal Institute for Materials Research and Testing (BAM) are described. The objective of the project is to enable the application of intumescent coatings on solid steel rods in tension within the scope of approvals in general.
Die hier vorgestellten Untersuchungen dienen der Erweiterung des Anwendungsbereiches für reaktive Brandschutzsysteme auf Stahlbauteilen im nationalen Zulassungsverfahren.
Für die Wirksamkeit reaktiver Brandschutzsysteme ist die Haftfähigkeit der reaktiven Brandschutzbeschichtung auf dem Untergrund (Stahl) von entscheidender Bedeutung. Die Haftfähigkeit der Beschichtung ist neben der Oberflächenbeschaffenheit und den Eigenschaften des reaktiven Systems selbst im Wesentlichen von der Form des Bauteils und den sich im Brandfall einstellenden erformungen (Krümmungen und Dehnungen) abhängig.
Intumescent fire protection coatings are used to improve the fire resistance of steel members. Due to slender cross-sections typically used for tension members, high demands are placed on the effectiveness and reliability of the intumescent coatings. This paper describes real-scale fire tests of intumescent coatings applied to steel tension members with circular solid and hollow sections. First, the current regulations for the application of intumescent coatings on steel tension members are discussed. After that, a comparison between the foaming behaviour and failure mechanisms of intumescent coatings applied to steel tension members with different cross-sections and loading conditions is given. Next, the experimental setup and procedure of the performed fire tests are presented. In addition, the influences of various parameters on the performance of the intumescent coating are analysed, including the geometry of the steel profile, dry film thickness of the intumescent coating, load utilisation level as well as the orientation of the member. Based on the theoretical considerations and results of the fire tests, it is evidenced that mechanically loaded fire tests are essential to assess accurately the contribution of intumescent fire protection coatings to the fire resistance of steel tension members with circular solid sections.
Intumescent coatings are commonly used in civil engineering to improve the fire resistance of steel constructions. Especially in the case of tension bars, where mostly circular or rectangular solid sections are used, intumescent coatings offer an efficient measure to improve the fire resistance taking advantage of profile-following application and low coating thickness requirements. Thus, the architectural appearance of slender profiles can be preserved. The paper describes real-scale mechanically loaded and unloaded fire tests of circular and rectangular solid steel tension bars with intumescent coating. The aim of these tests is to investigate the influence of the different profile types as well as different bar orientations on the performance of intumescent coatings. The results are used to specify a normative test and assessment procedure to be implemented in a new European standard for determining the contribution of intumescent coatings to the fire resistance of circular or rectangular bars used as tension members.
Reaktive Brandschutzsysteme finden im baulichen Brandschutz Anwendung zur Erhöhung des Feuerwiderstands von Stahlkonstruktionen. Neben den Anforderungen an die Feuerwiderstandsdauer können damit auch Ansprüche an die Ästhetik erfüllt werden. Die profilfolgende Applikation und die geringen Trockenschichtdicken der Produkte ermöglichen es, das filigrane Erscheinungsbild von Stahlkonstruktionen aufrechtzuerhalten. Neben der thermischen Schutzwirkung muss auch die Dauerhaftigkeit der Brandschutzbeschichtung sichergestellt werden. Die Bewertungsmethoden, die auf europäischer Ebene durch das EAD 350402-00-1106 zur Verfügung stehen, zielen auf eine Nutzungsdauer von zehn Jahren ab. Prüfverfahren für einen darüber hinausgehenden Zeitraum sind nicht beschrieben. In diesem Beitrag werden experimentelle Untersuchungen zum Einfluss der Bewitterung auf das Expansionsverhalten, zur thermischen Schutzwirkung und zu den während des Aufschäumens im Brandfall stattfindenden Reaktionen vorgestellt. Die Versuche wurden an einem wasserbasierten und einem epoxidharzbasierten reaktiven Brandschutzsystem durchgeführt. Die Ergebnisse wurden im Rahmen des IGF-Forschungsvorhabens 20470 N erzielt.
Um Stahlbauteile im Brandfall vor einer zu schnellen Erwärmung zu schützen, wird häufig auf reaktive Brandschutzsysteme (RBS) zurückgegriffen. Die Produkte eigenen sich besonders aufgrund der profilfolgenden Applikationsmöglichkeit und der vergleichsweise geringen Beschichtungsdicken. Bei einer Brandbeanspruchung schäumt das RBS auf und bildet eine thermische Schutzschicht um das Stahlprofil aus. Dadurch wird die Erwärmung des Stahls verlangsamt und der temperaturbedingte Festigkeitsverlust verzögert, wodurch sich die Feuerwiderstandsdauer des Stahlbauteils verbessert. Aus Brandversuchen ist bekannt, dass die Leistungsfähigkeit von RBS auf Stahlprofilen mit gekrümmter Oberfläche meist schlechter ausfällt als bei vergleichbaren Bauteilen mit ebener Oberfläche. Zum Einfluss der Oberflächenkrümmung auf die thermische Schutzwirkung von RBS werden in dem folgenden Beitrag sowohl theoretische Hintergründe als auch die Ergebnisse aus Brandversuchen an kleinformatigen Probekörpern vorgestellt. Die systematischen Untersuchungen zeigen, dass mit zunehmender Oberflächenkrümmung die Leistungsfähigkeit des RBS tendenziell abnimmt. Bei der Beurteilung der thermischen Schutzwirkung eines RBS sollte die Oberflächenkrümmung eines Bauteils berücksichtigt werden. Die alleinige Fokussierung auf den Profilfaktor eines Stahlprofils ist im Allgemeinen nicht ausreichend. Die Untersuchungen bilden die Grundlage für die Entwicklung von Screening-Tests zur Beurteilung der Eignung von RBS für gekrümmte Oberflächen, wodurch eine Vorauswahl von Produkten für diesen Einsatzzweck ermöglicht wird.
The size effect has its origin in fracture mechanics and describes the formation as well as propagation of cracks in brittle and solid materials in dependence of the specimen size. However, the size effect in concrete spalling describes the damage behaviour on a macroscopic scale for different sized specimens in case of fire. Concrete spalling is a very complex and yet not fully understood phenomenon. To reduce the effort of fire tests to analyse the spalling behaviour of concrete mixtures, this study investigates the susceptibility to spalling for six different concrete mixtures and three specimen sizes. The sizes were divided in full scale slabs (1.8 m x 1.2 m x 0.3 m), intermediate scale cuboids (0.6 m x 0.6 m x 0.3 m) and small scale cylinders (Ø0.15 m x 0.3 m). For this purpose, a novel test set-up was built to test six intermediate scale or twelve small scale specimens simultaneously to ensure a similar heating regime for every specimen. All specimens were fire exposed on one side and remained unrestrained. A size effect occurred for four of the six concrete mixtures. Compared to the full scale specimens the spalling was reduced significantly for all smaller specimen sizes. Additionally, spalling did not occur for the small scale specimens. The results show that the specimen size is an essential parameter to investigate the susceptibility to spalling of a concrete mixture. For future investigations the testing conditions must be adjusted for the intermediate scale specimens to recreate the conditions of the slabs.
The application of intumescent coatings for fire protection of steel constructions is
increasing. Thanks to the relative thin thickness of the coatings, the typical visual
appearance of the structures can remain essentially unchanged. In Germany, the
applicability of the systems is regulated by the national as well as European technical
assessments. According to the approvals, the application on steel members in tension is
only allowed with limitations. Especially, the application on solid steel rods in tension is
currently excluded from the approval. The paper explains the actual state of the art of the
application of reactive fire protection systems applied to steel structures. Physical and
technical background information are provided. Furthermore, the latest scientific results
of an on-going research project funded by the German National Institute of Building
Technology (DIBt) and conducted by the Federal Institute for Materials Research and
Testing (BAM) will be described.
Im Bauwesen werden für Zugglieder häufig Kreisvollprofile mit relativ kleinen Durchmessern eingesetzt. Diese Bauteile bestehen in der Regel aus gezogenem, kaltverformtem Blankstahl. Aufgrund des Herstellungsverfahrens kommt es zu einer Veränderung der Materialeigenschaften des Stahls. Für Blankstahl sind in der Norm [1] keine temperaturabhängigen Materialkennwerte angegeben. An der BAM Bundesanstalt für Materialforschung und -prüfung wurden im Rahmen eines Forschungsvorhabens [2] die mechanischen Hochtemperatureigenschaften von Stahlzuggliedern aus kaltverformtem Blankstahl der Festigkeitsklasse S355 untersucht. Als Ausgangsmaterial wurde ein Kreisvollprofil mit einem Durchmesser von 20 mm verwendet. Für den Blankstahl wurden die chemische Zusammensetzung, der Elastizitätsmodul, die Spannungs-Dehnungs-Kennlinien sowie der Wärmeausdehnungskoeffizient bestimmt. Ziel der Untersuchungen war es herauszufinden, welche materialspezifischen Besonderheiten kaltverformter Blankstahl unter Brandeinwirkung gegenüber anderen Stählen besitzt und inwieweit sich die in der Norm [1] für warmgewalzten Baustahl angegebenen Werte auf Blankstahl übertragen lassen. Die Ergebnisse der Materialuntersuchungen werden zudem für die numerische Nachrechnung von Brandversuchen an Stahlzuggliedern mit reaktiver Brandschutzbeschichtung verwendet.--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mechanical properties of cold drawn steel S355 at elevated temperatures used for tension rods. In construction, circular solid steel rods with relatively small diameter are often used for tensile elements. These elements are usually made of cold drawn steel. As a result of the manufacturing process, the material properties of the steel are changed. In the standard [1], no information regarding the temperature-dependant material properties of cold drawn steel are given. At BAM Federal Institute for Materials Research and Testing, a research project [2] was conducted to investigate the mechanical properties at elevated temperatures of tension elements made of cold drawn steel type S355. In the experiments, the tensile specimens were produced from a circular solid profile with a diameter of 20 mm. Within the research project, the chemical composition, the modulus of elasticity, the stress-strain-relationships and the thermal expansion coefficient were determined. The aim of this investigation was to identify the specific material characteristics of cold drawn steel under fire exposure. Furthermore, a comparison between cold drawn steel and the commonly used in construction hot-rolled steel was done, in order to clarify whether the material properties of hot rolled steel that are given in the standard [1] can be also used for cold drawn steel. The results of the material tests are used as input values for a numerical simulation of fire tests on tension elements with reactive fire protection systems.
Aktuelle Entwicklungen zur Anwendung reaktiver Brandschutzsysteme auf filigranen Stahlzuggliedern
(2016)
Im Stahlbau wird die feuerwiderstandserhöhende Wirkung reaktiver Brandschutzsysteme (RBS) bereits seit Jahrzehnten erfolgreich und mit stetig wachsender Nachfrage genutzt. Mehrjährige Forschungen an der Bundesanstalt für Materialforschung und -prüfung (BAM) haben dazu geführt, dass in Deutschland eine zulassungsbasierte Anwendung reaktiver Brandschutzsysteme auf Stahlzuggliedern mit Vollprofil möglich ist.