Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (20)
- Beitrag zu einem Tagungsband (18)
- Vortrag (10)
- Forschungsbericht (4)
- Buchkapitel (1)
- Sonstiges (1)
- Posterpräsentation (1)
Schlagworte
- Brandschutz (20)
- Reaktive Brandschutzsysteme (15)
- Feuerwiderstand (13)
- Brandversuche (8)
- Stahl (7)
- Zugglieder (7)
- Fire test (6)
- Reaktives Brandschutzsystem (6)
- Dauerhaftigkeit (5)
- Stahlbau (5)
Organisationseinheit der BAM
Paper des Monats
- ja (2)
Eingeladener Vortrag
- nein (10)
Die Verwendung von Endlosfilamenten aus Carbon als Be-wehrungsmaterial für Beton, sogenannter Textilbeton, bietet die Möglichkeit der Sanierung und der Verstärkung bestehender Stahlbetonkonstruktionen. Dabei muss die Frage nach dem Feuerwiderstand von derart verstärkten Tragwerken be-antwortet werden. Aufschluss darüber liefern Brandversuche. Mit Textilbeton verstärkte Stahlbetonplatten haben in Brandversuchen nach der Einheits-Temperaturzeitkurve bei 33 % der Traglast mehr als 60 Minuten standgehalten. Bei 50 % der Traglast kam es nach einer Branddauer von 55 Minuten, bei 65 % nach 30 Minuten, zu einem Zugversagen der textilen Verstärkungsschicht. Bei während des Brandes unbelasteten bzw. gering belasteten Platten lagen die im Anschluss ermittelten Resttragfähigkeiten bei 65 % der Bruchlast nach 30 Minu-ten Branddauer bzw. bei 50 % der Bruchlast nach 60 Minuten Branddauer. Wäh-rend und nach der Beflammung waren zunehmende Durchbiegungen und Rissbreiten erkennbar. Es traten aber keine Abplatzungen auf, weshalb die Ver-stärkungsschicht aus Textilbeton als zusätzliche Betondeckung für die Stahlbe-wehrung angerechnet werden kann. Diese außerordentlich positiven Ergebnisse zeigen, dass für verstärkte Konstruktionen Feuerwiderstandsklassen von F60 bzw. R60 ohne zusätzliche Maßnahmen erreicht werden können. Dies ist von ho-her Relevanz für die wirtschaftliche Anwendung dieser Verstärkungsmethode. Für ein umfassendes Verständnis der Interaktion zwischen den Bewehrungen Textil und Stahl sowie der Versagensmechanismen während des Brandes, sind weitere Erkenntnisse über die mechanischen Eigenschaften von Textilbeton im Hochtemperaturbereich nötig. Auch der Einfluss der Oxidation des Carbons konnte nicht abschließend beurteilt werden. 354 HOTHAN und EHLIG: Hochtemperaturverhalten von Stahlbetonplatten mit TRC-Verstärkung Summary: Using endless carbon filaments for concrete reinforcement, so called textile reinforced concrete, the possibility of reconstruction and strengthening of existing concrete structures arises. The question concerning fire resistance of structures strengthened like this has to be answered. Fire tests provide answers. Steel reinforced concrete slabs strengthened with textile reinforced concrete load-ed with 33 % of ultimate load survived an ISO-fire for 60 minutes. Loaded with 50 % and 65 % of ultimate load the slabs failed after 55 minutes and 30 minutes of fire exposure due to tension failure of the textile reinforcement layer. Slabs not loaded or with a low load level during fire exposure showed remaining bearing resistances of 65 % of ultimate load after 30 minutes and 50 % of ultimate load after 60 minutes of fire exposure. During and after fire exposure rising deflec-tions and growing crack widths were observed. However no spalling occurred. Therefore the textile reinforced concrete layer can be taken into account as con-crete covering for the steel reinforcement. Those extraordinary positive results document, that reinforced concrete structures with additional fibre reinforced concrete can achieve fire resistance classes of R60 without additional provisions. To achieve comprehensive understanding of interaction between steel and fibre reinforcement and failure mechanisms in case of fire more knowledge concerning the mechanic properties of fibre reinforced concrete at high temperatures is es-sential. The influence of oxidation of the carbon fibres could not fully be an-swered.
Der Beitrag beschreibt die Entwicklung eines neuartigen in situ Nachweisverfahrens zur Beurteilung des Feuerwiderstandes von bestehenden Stahlkonstruktionen mit gealtertem reaktivem Brandschutzsystem (RBS). Derzeit ist ein solcher Nachweis ausschließlich anhand eines Bauteilbrandversuchs möglich. Hierzu muss ein Bauteil aus der Bestandskonstruktion entnommen und einer zerstörenden Brandprüfung unterzogen werden. In Zusammenhang mit der Dauerhaftigkeitsbewertung von RBS für Zeiträume von mehr als 10 Jahren besteht in der Praxis vermehrt der Bedarf an einem minimal invasiven Prüfverfahren, mit dessen Hilfe sich direkt am Bestandsbauwerk die tatsächlich vorhandene Leistungsfähigkeit des gealterten RBS überprüfen lässt. Durch einen erfolgreichen Funktionsnachweis wäre eine Weiternutzung der Bestandkonstruktion bei Aufrechterhaltung des bestehenden Sicherheitsniveaus möglich.
Deckensysteme aus Spannbeton-Hohlplatten (engl.: Hollow Core Slabs, HC-Platten) werden im Hochbau insbesondere aus wirtschaftlichen Gründen eingesetzt. Vorteile gegenüber Massivdecken in Ortbetonweise ergeben sich insbesondere aus dem hohen Vorfertigungsgrad, geringem Eigengewicht und der Möglichkeit großer Spannweiten bei relativ niedrigen Querschnitten. Bei einem 2007 aufgetretenen Brandereignis in einem Parkhaus in Rotterdam kam es infolge Horizontalrissbildung in den Plattenstegen zu einer teilweisen Ablösung des unteren Plattenspiegels. Dies hatte eine europaweite Diskussion zur brandschutztechnischen Bewertung dieser Bauart zur Folge. Mittlerweile liegen gutachterliche Stellungnahmen, Literaturauswertungen und auch jüngere Forschungsarbeiten zum Feuerwiderstand von Konstruktionen aus Spannbeton-Hohlplatten vor. In den Untersuchungen wurde unter anderem das Tragverhalten von HC-Platten bei starrer Auflagerung, insbesondere hinsichtlich der Querkrafttragfähigkeit, untersucht.
Ein bei der Prüfung und Bewertung von Spannbeton-Hohlplatten bisher kaum beachteter Aspekt ist die im Brandfall auftretende Behinderung der Querdehnung infolge umgebender Bauteile oder Tragwerksteile. Im Bauwerk kann für HC-Platten eine Querdehnungsbehinderung im Brandfall auftreten, wenn eine steife Begrenzung des brandbeanspruchten Deckenbereiches vorliegt, z.B. durch Treppenhauskerne oder auch durch umgebende Decken-felder bei lokaler Brandbeanspruchung. Ferner legten Versuchsergebnisse nahe, dass eine Aufbetonschicht die Zwängungen in der HC-Platte verstärkt. Die Problematik der Querdehnungsbehinderung im Brandfall wurde auch in Gremien der Bauaufsicht sowie im zuständigen Sachverständigenausschuss des Deutschen Instituts für Bautechnik (SVA 463 Tragwerksbemessung für Brandeinwirkung) erörtert. Dabei wurde anhand vorgelegter Studien und numerischer Voruntersuchungen deutlich, dass die Bildung von Horizontalrissen in den Plattenstegen auch bei HC-Platten ohne Aufbeton auftreten kann.
Um den Einfluss der Querdehnungsbehinderung zu klären wurden an der BAM entsprechende experimentelle und numerische Untersuchungen an Decken-feldern aus Spannbeton-Hohlplatten mit unterschiedlichem Grad der seitlichen Zwängung durchgeführt. Im Beitrag werden die im Realmaßstab durch-geführten Brandversuche beschrieben und deren Ergebnisse und daraus abgeleiteten Erkenntnisse vorgestellt.
Intumescent coatings are commonly used in civil engineering to improve the fire resistance of steel constructions. Especially in the case of tension bars, where mostly circular or rectangular solid sections are used, intumescent coatings offer an efficient measure to improve the fire resistance taking advantage of profile-following application and low coating thickness requirements. Thus, the architectural appearance of slender profiles can be preserved. The paper describes real-scale mechanically loaded and unloaded fire tests of circular and rectangular solid steel tension bars with intumescent coating. The aim of these tests is to investigate the influence of the different profile types as well as different bar orientations on the performance of intumescent coatings. The results are used to specify a normative test and assessment procedure to be implemented in a new European standard for determining the contribution of intumescent coatings to the fire resistance of circular or rectangular bars used as tension members.
Understanding the susceptibility to spalling of concrete members in case of fire is important to evaluate the residual load-bearing capacity. The investigations of the spalling phenomenon of a concrete mixture using real scale members are necessary but expensive to carry out. Reducing the specimen size leads to an increase of boundary effects that can result in a reduced spalling or absence of spalling. In this study, fire tests were carried out on unrestrained, single-sided exposed, cuboid shaped specimens (0.6 m x 0.6 m x 0.29 m) as well as unrestrained and steel ring restrained cylindrical specimens (Ø = 0.47 m, h = 0.29 m), which induce different boundary conditions. These fire tests were carried out on two ordinary concrete mixtures. The two mixtures differ only in the type of aggregates (quartz gravel and basalt grit) and were used to investigate the influence of the thermal expansion of the aggregate on the spalling behaviour of the concrete. The results show a significant increase of
the spalling depth due to the restrained thermal expansion achieved by the applied steel rings. Additionally, the type of aggregate has a direct influence on the spalling behaviour of a concrete mixture. The reduction of the boundary effects by the steel rings recreate the test conditions in the centre of a large concrete member. Thus, this type of specimen is suitable to determine the susceptibility to spalling of a material (screening-tests) as preliminary investigations to full scale fire tests.
Spalling of concrete due to fire exposure can lead to severe damage of building components. It is a much discussed subject in structural engineering and not yet completely understood. Generally, it is assumed that thermohydraulic and thermomechanical processes induce tensile stresses in the concrete. Furthermore, the tensile strength of concrete is reduced due to increasing temperatures. The combination of an increasing tensile stress and a decreasing tensile strength result in the occurrence of explosive spalling. The spalling behaviour of concrete is influenced by many parameters, for instance the water cement ratio, porosity, permeability of concrete as well, the presence of steel reinforcement and polypropylene fibres, also the size and geometry of the fire exposed area. Within the current research project at Bundesanstalt für Materialforschung und prüfung (BAM), the susceptibility to spalling of six different concrete mixtures is analysed to quantify the size effect using small scale, intermediate scale and full scale tests. A special fire test setup was built to test specimens simultaneously to enable a better comparability. All specimens are tested without additional mechanical load and unrestraint to prevent external induced cracking at the fire exposed site. Thermocouples are used to measure in situ the temperature distribution as an indication on the thermal degradation of the concrete during the fire tests. Afterwards the maximum spalling depth and the damaged area of the specimen are illustrated by a photogrammetric measurement system. The contribution to the spalling workshop presents the results of four concrete mixtures tested in intermediate-scale and full-scale fire tests. The comparisons are based on the concrete temperature as well as the obtained photogrammetric data. The results show that the spalling depth and the spalling area are significantly affected by the size of the fire exposed area.
Zur brandschutztechnischen Ertüchtigung von Stahlkonstruktionen werden reaktive Brandschutzsysteme aufgrund der geringen Beschichtungsdicken und der profilfolgenden Applikation in zunehmendem Maße eingesetzt. Da die für Zugstabsysteme eingesetzten Bauteile meist eine stark konvex gekrümmte Oberfläche aufweisen und der Anschlussbereich über eine vergleichsweise komplexe Geometrie verfügt, stellt dies besonders hohe Anforderungen an die Leistungsfähigkeit von reaktiven Brandschutzsystemen. Anhand von realmaßstäblichen Brandversuchen wurden das Aufschäumungs- und Rissverhalten, der Einfluss der Trockenschichtdicke, die Erwärmung der einzelnen Stahlbauteile sowie der Einfluss der Bauteilorientierung untersucht. Die Ergebnisse zeigen, dass eine Abnahme der Oberflächenkrümmung oder eine Erhöhung der Massenkonzentration der Stahlbauteile zu einer geringeren Aufheizrate des Stahls führt. Darüber hinaus ist festzustellen, dass die Leistungsfähigkeit des reaktiven Brandschutzsystems von der Bauteilorientierung der Zugstabsysteme beeinflusst wird. Die durchgeführten Brandversuche können zur Entwicklung geeigneter Prüfszenarien für die Beurteilung von reaktiven Brandschutzsystemen auf Zugstabsystemen und deren Anschlusskonstruktionen verwendet werden, wodurch eine Erweiterung des zulassungsbasierten Anwendungsbereichs ermöglicht wird.
Im Bauwesen werden für Zugglieder häufig Kreisvollprofile mit relativ kleinen Durchmessern eingesetzt. Diese Bauteile bestehen in der Regel aus gezogenem, kaltverformtem Blankstahl. Aufgrund des Herstellungsverfahrens kommt es zu einer Veränderung der Materialeigenschaften des Stahls. Für Blankstahl sind in der Norm [1] keine temperaturabhängigen Materialkennwerte angegeben. An der BAM Bundesanstalt für Materialforschung und -prüfung wurden im Rahmen eines Forschungsvorhabens [2] die mechanischen Hochtemperatureigenschaften von Stahlzuggliedern aus kaltverformtem Blankstahl der Festigkeitsklasse S355 untersucht. Als Ausgangsmaterial wurde ein Kreisvollprofil mit einem Durchmesser von 20 mm verwendet. Für den Blankstahl wurden die chemische Zusammensetzung, der Elastizitätsmodul, die Spannungs-Dehnungs-Kennlinien sowie der Wärmeausdehnungskoeffizient bestimmt. Ziel der Untersuchungen war es herauszufinden, welche materialspezifischen Besonderheiten kaltverformter Blankstahl unter Brandeinwirkung gegenüber anderen Stählen besitzt und inwieweit sich die in der Norm [1] für warmgewalzten Baustahl angegebenen Werte auf Blankstahl übertragen lassen. Die Ergebnisse der Materialuntersuchungen werden zudem für die numerische Nachrechnung von Brandversuchen an Stahlzuggliedern mit reaktiver Brandschutzbeschichtung verwendet.--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mechanical properties of cold drawn steel S355 at elevated temperatures used for tension rods. In construction, circular solid steel rods with relatively small diameter are often used for tensile elements. These elements are usually made of cold drawn steel. As a result of the manufacturing process, the material properties of the steel are changed. In the standard [1], no information regarding the temperature-dependant material properties of cold drawn steel are given. At BAM Federal Institute for Materials Research and Testing, a research project [2] was conducted to investigate the mechanical properties at elevated temperatures of tension elements made of cold drawn steel type S355. In the experiments, the tensile specimens were produced from a circular solid profile with a diameter of 20 mm. Within the research project, the chemical composition, the modulus of elasticity, the stress-strain-relationships and the thermal expansion coefficient were determined. The aim of this investigation was to identify the specific material characteristics of cold drawn steel under fire exposure. Furthermore, a comparison between cold drawn steel and the commonly used in construction hot-rolled steel was done, in order to clarify whether the material properties of hot rolled steel that are given in the standard [1] can be also used for cold drawn steel. The results of the material tests are used as input values for a numerical simulation of fire tests on tension elements with reactive fire protection systems.
The application of intumescent coatings for fire protection of steel constructions is increasing.
Thanks to the relative thin thickness of the coatings, the typical visual appearance of the
structures can be preserved. In Germany, the applicability of the systems is regulated by the
national as well as European technical approvals. According to the approvals, the application
on steel members in tension is only allowed with limitations. Especially, the application on
solid steel rods in tension is currently not covered. The paper will explain the actual state of
the art of the application of reactive fire protection systems applied to steel structures.
Physical and technical background information will be provided. After that, the latest
scientific results of an on-going research project funded by the German National Institute of
Building Technology (DIBt) and conducted by the Federal Institute for Materials Research
and Testing (BAM) will be described.
The application of intumescent coatings for fire protection of steel constructions is
increasing. Thanks to the relative thin thickness of the coatings, the typical visual
appearance of the structures can remain essentially unchanged. In Germany, the
applicability of the systems is regulated by the national as well as European technical
assessments. According to the approvals, the application on steel members in tension is
only allowed with limitations. Especially, the application on solid steel rods in tension is
currently excluded from the approval. The paper explains the actual state of the art of the
application of reactive fire protection systems applied to steel structures. Physical and
technical background information are provided. Furthermore, the latest scientific results
of an on-going research project funded by the German National Institute of Building
Technology (DIBt) and conducted by the Federal Institute for Materials Research and
Testing (BAM) will be described.
Das Forschungsvorhaben verfolgt im Wesentlichen das Ziel, die Anwendbarkeit von reaktiven Brandschutzsystemen auf Zugstabsystemen auf Grundlage von allgemeinen bauaufsichtlichen Zulassungen zu ermöglichen. Zu diesem Zweck sollen neben versuchstechnischen Beurteilungsverfahren auch rechnerische Nachweismöglichkeiten im Rahmen der sogenannten Heißbemessung entwickelt werden.
Intumescent fire protection coatings are used to improve the fire resistance of steel members. Due to slender cross-sections typically used for tension members, high demands are placed on the effectiveness and reliability of the intumescent coatings. This paper describes real-scale fire tests of intumescent coatings applied to steel tension members with circular solid and hollow sections. First, the current regulations for the application of intumescent coatings on steel tension members are discussed. After that, a comparison between the foaming behaviour and failure mechanisms of intumescent coatings applied to steel tension members with different cross-sections and loading conditions is given. Next, the experimental setup and procedure of the performed fire tests are presented. In addition, the influences of various parameters on the performance of the intumescent coating are analysed, including the geometry of the steel profile, dry film thickness of the intumescent coating, load utilisation level as well as the orientation of the member. Based on the theoretical considerations and results of the fire tests, it is evidenced that mechanically loaded fire tests are essential to assess accurately the contribution of intumescent fire protection coatings to the fire resistance of steel tension members with circular solid sections.
Steel tension rod systems consist of tension rods, fork connectors and associated intersection or connecting plates. They are used for truss systems, bracings or suspensions owing to slender design and increased economic efficiency. In case of fire, beside the tension rods themselves, the connection parts require appropriate fire protection. The use of intumescent fire protection coatings prevents a rapid heating of the steel and helps to ensure the load-carrying capacity of the structures. Because the connection components of the tension rod systems feature surface curvature as well as a complex geometry, high demand is placed on the intumescence and thermal protection effectiveness of the reactive fire protection coatings. Experimental studies were carried out to investigate the performance of intumescent coatings applied to the components of tension rod systems. The examined aspects include the foaming and cracking behaviour of the intumescent coatings, the influence of different dry film thicknesses (DFT), the heating rate of the steel connecting parts in comparison to the tension rods, as well as the mounting orientation of the tension rods together with their associated fork connectors. The results show that a decrease in the surface curvature and/or an increase in the mass concentration of the steel components lead to a lower heating rate of the steel. Moreover, the performance of the intumescent coating on tension rod systems is influenced by the mounting orientation of the steel components.
Prüfmethodik für reaktive Brandschutzsysteme auf Stahlzuggliedern mit kreisrundem Vollquerschnitt
(2014)
An der BAM Bundesanstalt für Materialforschung und -prüfung werden Brandversuche an axial belasteten und unbelasteten Zuggliedern mit reaktiver Brandschutzbeschichtung durchgeführt. Neben den für Zugglieder typischen Kreisvollprofilen ist auch ein Kreishohlprofi! untersucht worden. In dieser Veröffentlichung werden Versuchsaufbau und -durchführung sowie die Ergebnisse der bisher durchgeführten Brandversuche vorgestellt. Die bisherigen Brandprüfungen zeigen, dass grundsätzlich eine Anwendung eines herkömmlichen reaktiven Brandschutzsystems auf kreisrunden Stahlprofilen möglich ist. Jedoch ergeben sich aufgrund des gekrümmten Querschnittes Besonderheiten, welche bei der Prüfung dieser Systeme und deren späteren Anwendung zu berücksichtigen sind. Unter anderem ist besonders bei kleinen Trockenschichtdicken mit einer ausgeprägten Längsrissbildung im aufgeschäumten Brandschutzsystem zu rechnen, welche die thermische Schutzwirkung des Systems erheblich beeinträchtigt. Neben Rissen in Längsrichtung treten auch Querrisse im Brandschutzsystem auf. Anhand der Versuche zeigt sich, dass die aufgebrachte mechanische Zugbelastung die Rissbildung begünstigt. Das Versagen der belasteten Zugglieder ereignet sich meist in der Nähe der gemessen maximalen Stahltemperatur und kündigt sich durch eine Zunahme und Vergrößerung der Querrisse an. Im Allgemeinen führt eine Erhöhung der Trockenschichtdicke bzw. eine Reduzierung des Lastausnutzungsgrades zu einer Verbesserung des Feuerwiderstandes. Ein Unterschied in den Temperaturverläufen von belasteten und unbelasteten Versuchskörpern ist besonders bei geringen Schichtdicken zu beobachten.
Reaktive Brandschutzsysteme
(2022)
Reaktive Brandschutzsysteme
(2022)
Die Erkenntnisse zu reaktiven Brandschutzsystemen (RBS) werden kontinuierlich erweitert, was sich in der Entwicklung neuer Produkte und der Ausweitung des durch technische Regelungen abgedeckten Anwendungsbereichs äußert. Der vorliegende Beitrag konzentriert sich auf die Verwendung von RBS auf Stahlkonstruktionen. Neben einer umfassenden Darstellung der aktuellen nationalen und europäischen Regelungen zu RBS, werden technologische Besonderheiten und deren Einfluss auf den Regelungsinhalt im Beitrag thematisiert. Dabei werden neben sich abzeichnenden Neuerungen auch die entsprechenden wissenschaftlich-technologischen Grundlagen dargelegt. Ferner wird die Frage nach der Bewertung der Dauerhaftigkeit von RBS für deutlich über 10 Jahre hinausgehende Zeiträume, und den sich damit einstellenden Feuerwiderstand der Konstruktion behandelt. Der Beitrag schließt mit einer Darstellung zur aktuellen Forschung. Daraus abgeleitet wird ein Ausblick auf zukünftige Forschungsthemen.
Reaktive Brandschutzsysteme können die Feuerwiderstandsdauer von Stahlbauteilen signifikant erhöhen. Im Brandfall schäumt das reaktive Brandschutzsystem auf und bildet um das Stahlbauteil eine thermische Schutzschicht aus. Dadurch wird die Erwärmung des Stahls verlangsamt und der temperaturbedingte Festigkeitsverlust verzögert. Reaktive Brandschutzsysteme werden überwiegend in drei Bereichen angewendet: Hochbau, Offshore bzw. maritimer Sektor sowie Tank- bzw. Behälterbau. Insbesondere bei Stahltanks und -behältern sind häufig einfach oder auch doppelt gekrümmte Bauteiloberflächen anzutreffen. Aufgrund des meist begrenzten seitlichen Expansionsvermögens von reaktiven Brandschutzsystemen kann es bei Bauteilen mit konvexer Oberflächenkrümmung zu einer Intensivierung der Rissbildung im Schaum kommen, wodurch sich häufig die thermische Schutzwirkung verschlechtert. Da zum Thema des Einflusses der Oberflächenkrümmung auf die Leistungsfähigkeit reaktiver Brandschutzsysteme bisher kaum Untersuchungen vorliegen, wurden exemplarisch zwei Tankböden mit zwei verschiedenen Trockenschichtdicken eines reaktiven Brandschutzsystems einer Brandprüfung unterzogen. Bei gleicher Trockenschichtdicke des reaktiven Brandschutzsystems zeigten die Tankböden eine wesentlich schnellere Erwärmung als ebene Stahlplatten mit vergleichbarem Profilfaktor. Die Brandprüfungen und die Ergebnisse zum Einfluss der Oberflächenkrümmung werden im Beitrag ausführlich vorgestellt und diskutiert.