Filtern
Dokumenttyp
Sprache
- Englisch (11) (entfernen)
Schlagworte
- Non-destructive testing (5)
- Historic masonry (4)
- Active thermography (3)
- Cultural heritage (3)
- Masonry (3)
- Radar (3)
- Damage (2)
- Flood (2)
- Non-destructive testing in civil engineering (2)
- Structural modelling (2)
Monitoring of cracks in historic concrete structures using optical, thermal and acoustical methods
(2015)
Cracks are a major issue in the field of cultural heritage. In order to evaluate the significance of a crack, a long term monitoring of the damaged region is required. However, there is a lack of easy to operate tools for such monitoring measures. Therefore, new or existing methods for other applications have to be optimised for cultural heritage investigation. The paper describes the application of such crack observation methods on a historic concrete sculpture. Beside conventional methods, like mapping by hand and ultrasonic depth profiling, a novel tracking system is presented. Furthermore, the suitability of active thermography for the investigation of cracks was investigated. The results show promising prospects for these non-destructive techniques.
Methods for the combination (i. e. comparison and overlay) and data fusion (i. e. integration of all data in one data set, replacement of data) of active thermography and D laser scanner (light section method) have been developed. Systematic investigations for quantification of damage in historic structures are presented using both techniques. A case study shows that reproducible investigations at regular time intervals are very well suited for structural monitoring.
Strategies and methodologies for the assessment of historic masonry structures based on non-destructive and minor-destructive testing methods were developed in the European Research Project ONSITEFORMASONRY and were successfully applied to assess the structure and material properties of selected structural elements in the Altes Museum in Berlin-Mitte.
For the planning of a broad reconstruction within the framework of a master plan concerning the whole of Museum Island in Berlin, several questions arose which are also typical for other historic structures in general, thus the Altes Museum was chosen as a pilot site for the validation of non-destructive testing methods.
Active thermography is well suited for the detection of delaminations and cracks in façade elements like plaster and tiles. Not only artificial heating but also solar heating can be used if the adjustment of the façade and the weather conditions are suitable. Optical methods like laser scanners, photogrammetric methods and crack tracking sensors are providing geometrical 3D data which can be used for a 3D mapping of thermograms and for providing data with higher geometrical resolution. Thus, by the combination and fusion of these data, a comprehensive mapping and monitoring of damages of façade systems is possible.
In this contribution, the development and application of optical and thermographic methods for the nondestructive evaluation of delaminations, cracks and further substructures in Connection with bulging is presented.
Since delaminated fagade elements show geometric as well as thermal anomalies, surface geometry and defects beneath the surface were investigated. As methods, Stereo photogrammetry, a tracking based method for tactile recording of geometric 3D data and active thermography were used. Two case studies were assessed with a combination of these methods: the plaster scratches at the Magdeburg Cathedral and a mural painting in Cobbelsdorf, both located in Germany. While the plaster scratches have been investigated by artificial heating with an infrared radiator, the rural painting was tested by analysing the temperature increase due to solar heating.
For the investigation of the complex inner structure of historic buildings, the application of radar has been increased during the last ten years. Although historic masonry in general is very inhomogeneous and although in some cases high absorption occurs due to enhanced moisture, radar has been successfully applied to get information on geometry, position of inclusions and about kind and size of existing damages. In this paper case studies will be presented concerning the localisation of metallic inclusions and the investigations of the structure of an exterior wall with a multiple leaf structure.