Filtern
Dokumenttyp
Sprache
- Englisch (4) (entfernen)
Schlagworte
- Historic masonry (2)
- Non-destructive testing (2)
- Anchors (1)
- Case studies (1)
- Columns (1)
- Composites (1)
- Cupola (1)
- Fibre optic sensor technology (1)
- Hybrid construction types (1)
- Radar (1)
Eingeladener Vortrag
- nein (1)
Strategies and methodologies for the assessment of historic masonry structures based on non-destructive and minor-destructive testing methods were developed in the European Research Project ONSITEFORMASONRY and were successfully applied to assess the structure and material properties of selected structural elements in the Altes Museum in Berlin-Mitte.
For the planning of a broad reconstruction within the framework of a master plan concerning the whole of Museum Island in Berlin, several questions arose which are also typical for other historic structures in general, thus the Altes Museum was chosen as a pilot site for the validation of non-destructive testing methods.
In structural engineering timber is appreciated due to its low weight, its high aesthetic quality and because it is a renewable resource. The market share of timber structures and wood based hybrid structures will clearly increase over the next few years due to greater environmental awareness and a higher demand for sustainability. However, building with timber is marked by characteristics which lead to significant disadvantages in comparison wifh technical materials. For example, in outdoor areas Chemical and structural approaches offen lead to unsatisfactory and expensive Solutions with respect to durability. An idea is to make natural lumber a high-performance material which can be designed to meet the engineers’ demands conceming strength, stiffness, durability, shape, safety etc. These changes can affect the material itself, new technologies or a new approach to monitoring. Especially hybrids made of common timber products and technical textiles or enhanced timber products are high-capacitive and reach high bearing strengths with low material input and good durability. These hybrids are particularly qualified to use the advantages of wood and minimize the disadvantages. They can be used in different ways for load bearing structures, i.e. bridges. New construction types need monitoring to observe the stress and strains for which they were designed, and the structures’ behaviour as well as to guarantee required safety levels. The aim of successful usage of fibre optic measurement technology in timber elements was the development of a technology for measuring the lengthening in timber elements and wood based hybrid elements by using fibre optic sensors. The scientific and technical challenge was to develop an applicationtechnology for optical glass fibres in timber and densified veneer wood.
In laboratory tests as well as with the erection of a footbridge and during in-situ tests it could be shown that the structurally integrated fibre optic sensor technology used is suitable for short and long term measurement. The developed embedment technology tums out to be practical and fit for good transfer of strain-values from timber to the modified sensor fibres.