Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (66)
- Vortrag (10)
- Posterpräsentation (2)
Schlagworte
- Mechanochemistry (10)
- In situ (9)
- Synchrotron (9)
- XANES (9)
- BAMline (6)
- X-ray absorption spectroscopy (6)
- Catalysis (5)
- EXAFS (5)
- XAS (5)
- High-entropy alloys (4)
- Beamline (3)
- Element-specific spectroscopy (3)
- Magnetism (3)
- Material characterization (3)
- Nanoparticles (3)
- Single-shot XAFS (3)
- Struvite (3)
- Time resolution (3)
- Time resolved (3)
- Time-resolved (3)
- XAFS (3)
- XRD (3)
- Adsorbates (2)
- C-F bond activation (2)
- Cobalt (2)
- Corrosion (2)
- Crystallization (2)
- DRIFTS (2)
- Dipsersive XAS (2)
- Dispersive XAS (2)
- Extended X-ray absorption fine structure (EXAFS) (2)
- Heterogeneous catalysis (2)
- Imaging (2)
- Infrared spectroscopy (2)
- Metal phosphonate (2)
- Phosphates (2)
- Photocatalysis (2)
- Platinum (2)
- Reverse Monte Carlo (RMC) (2)
- Selective oxidation (2)
- Silica support (2)
- Structure analysis (2)
- Synchrotron studies (2)
- TXRF (2)
- VRFB (2)
- X-ray Spectroscopy (2)
- X-ray fluorescence spectroscopy (2)
- X-ray spectroscopy (2)
- XRF (2)
- Absorption spectrometry (1)
- Acid resistance (1)
- Adsorption of phosphate (1)
- Alkali-activated materials (1)
- Amorphous materials (1)
- Aqueous synthesis (1)
- Artificial neural network modelling (1)
- BESSY (1)
- Bayesian Optimization (1)
- Bimetallic frameworks (1)
- Biofunctional Molecules (1)
- Biological & biomedical applications (1)
- Biomedical applications (1)
- Bismuth (1)
- Bismuth Ferrite (1)
- CO adsoprtion (1)
- CO adsorption (1)
- Calcium monofluoride (1)
- Calcium-carbonate (1)
- Capillary (1)
- Cobalt and zinc oxides (1)
- Coded Aperture (1)
- Coded aperture (1)
- Coded apertures (1)
- Compositional complex alloys (1)
- Coordination chemistry (1)
- Coordination polymers (1)
- Core-shell (1)
- Crystal-growth (1)
- Cu catalysts (1)
- Degradation mechanisms (1)
- Depth resolved XANES (1)
- Dispersive-XAS (1)
- Divergent XAFS (1)
- Electrochemical CO2 conversion (1)
- Electrodes (1)
- Elemental mapping (1)
- Energy storage (1)
- Environmental impacts (1)
- Eu (1)
- Experimental setup (1)
- Extended X-ray absorption fine structure (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- Fe-N-C catalysts (1)
- Ferroelectric (1)
- Fluorapatite-gelatin nanocomposites (1)
- Formaldehyde (1)
- Fuel Cells (1)
- GE-XANES (1)
- General Chemistry (1)
- General Materials Science (1)
- Gold Synchrotron XRF (1)
- Graphite furnace (1)
- Grazin exit XANES (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- HERFD-XAS (1)
- HF-shuttle (1)
- HR-CS-MAS (1)
- Halide Perovskites (1)
- Hazardous substances (1)
- High-temperature fuel cells (1)
- Hydrates (1)
- ICP-OES (1)
- Image reconstruction (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In situ characterization (1)
- In situ coupling (1)
- In situ studies (1)
- In-situ (1)
- In-situ SAXS/WAXS (1)
- Iterative reconstruction (1)
- Lacunary Keggin ion (1)
- Lanthanides (1)
- Lanthanoide (1)
- Laterally-resolved (1)
- M-N-C catalysts (1)
- MAPbI3 perovskites (1)
- MIC (1)
- MOF (1)
- Machine Learning (1)
- Mechanochemictry (1)
- Mesoporosity (1)
- MicroXRF (1)
- Microbially induced corrosion (1)
- Molecular VOx catalysts (1)
- Nafion 117 (1)
- Nano particles (1)
- Nanoparticle synthesis (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Nickel (1)
- Nickel nanoparticles (1)
- Nondestructive testing techniques (1)
- Nucleation (1)
- OER (1)
- Oxidation (1)
- Oxygen Evolution Catalyst (1)
- Oxygen evolution reaction (OER) (1)
- PQQ (1)
- PVDF-Based membrane (1)
- PVDF-based membrane (1)
- Phosphorous recovery (1)
- Piezoresponse (1)
- Platinum Wavelength dispersive D2XRF (1)
- Polarization (1)
- Polymorphism (1)
- Polyoxometalates (1)
- Postfluorination (1)
- Pphosphates (1)
- Proton conductivity (1)
- Quick-XAS (1)
- RXES (1)
- Rare earth elements separations (1)
- Re-XANES (1)
- Renewable Energy (1)
- Reverse Monte Carlo (1)
- SAXS (1)
- Sample changer (1)
- Self-assembly (1)
- Separation (1)
- Single-shot EXAFS (1)
- Solid-State Complexes (1)
- Spatial resolution (1)
- Spectroscopy (1)
- SrF2 (1)
- String metal support interaction (1)
- Strong metal support interaction (1)
- Structural Analysis (1)
- Sulfidation (1)
- Sustainability and the Environment (1)
- TEM (1)
- TXRF-XANES (1)
- TXRF-XAS (1)
- Tattoo inks (1)
- Ti-based colloids (1)
- Toxic metals (1)
- Transition metal (1)
- Transition metals (1)
- UV/VIS (1)
- Up-cycling (1)
- Vanadium redox flow battery (1)
- Vanadium speciation (1)
- Water oxydation catalysis (1)
- Women in STEM (1)
- X-ray Absorption Spectroscopy (1)
- X-ray Color Camera (1)
- X-ray absorption fine structure (1)
- X-ray absorption near edge structure (XANES) (1)
- X-ray diffraction (1)
- X-ray fluorescence imaging (1)
- X-ray magnetic circular dichroism (XMCD) (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- XANES X-ray absorption near edge structure spectroscopy (1)
- Xerogel (1)
- ZCF (1)
- ZIF-8 (1)
- Zeolitic Imidazolate Frameworks (1)
- Zinc phosphate (1)
- Zirconium (1)
- Zn-Fe-Zr nanoparticles (1)
- confocal (1)
- mXRF Micro-X-ray fluorescence spectroscopy (1)
- maghemite (1)
- oxidation state (1)
- progressive hepatolenticular degeneration (1)
- structural information (1)
- Δμ XANES (1)
Organisationseinheit der BAM
- 6 Materialchemie (57)
- 6.3 Strukturanalytik (57)
- 6.0 Abteilungsleitung und andere (5)
- 6.1 Oberflächen- und Dünnschichtanalyse (3)
- 1 Analytische Chemie; Referenzmaterialien (2)
- 1.4 Prozessanalytik (2)
- 3 Gefahrgutumschließungen; Energiespeicher (2)
- 4 Material und Umwelt (2)
- 4.2 Material-Mikrobiom Wechselwirkungen (2)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (2)
- 1.1 Anorganische Spurenanalytik (1)
- 1.3 Instrumentelle Analytik (1)
- 1.6 Anorganische Referenzmaterialien (1)
- 3.0 Abteilungsleitung und andere (1)
- 3.6 Elektrochemische Energiematerialien (1)
- 5 Werkstofftechnik (1)
- 5.0 Abteilungsleitung und andere (1)
- 5.1 Mikrostruktur Design und Degradation (1)
- 7 Bauwerkssicherheit (1)
- 7.4 Baustofftechnologie (1)
- 8 Zerstörungsfreie Prüfung (1)
- 8.5 Röntgenbildgebung (1)
- 9 Komponentensicherheit (1)
- 9.2 Versuchsanlagen und Prüftechnik (1)
- P Präsident (1)
- P.0 Präsident und andere (1)
Paper des Monats
- ja (2)
Eingeladener Vortrag
- nein (10)
The reaction of iron chlorides with an alkaline reagent is one of the most prominent methods for the synthesis of iron oxide nanoparticles. We studied the particle formation mechanism using triethanolamine as reactant and stabilizing agent. In situ fast-X-ray absorption near edge spectroscopy and small-angle X-ray scattering provide information on the oxidation state and the structural information at the same time. In situ data were complemented by ex situ transmission electron microscopy, wide-angle X-ray scattering and Raman analysis of the formed nanoparticles. The formation of maghemite nanoparticles (γ-Fe2O3) from ferric and ferrous chloride was investigated. Prior to the formation of these nanoparticles, the formation and conversion of intermediate phases (akaganeite, iron(II, III) hydroxides) was observed which undergoes a morphological and structural collapse. The thus formed small magnetite nanoparticles (Fe3O4) grow further and convert to maghemite with increasing reaction time.
A new concept that comprises both time- and lateral-resolved X-ray absorption fine-structure information simultaneously in a single shot is presented. This uncomplicated set-up was tested at the BAMline at BESSY-II (Berlin, Germany). The primary broadband beam was generated by a double multilayer monochromator. The transmitted beam through the sample is diffracted by a convexly bent Si (111) crystal, producing a divergent beam. This, in turn, is collected by either an energy-sensitive area detector, the so-called color X-ray camera, or by an area-sensitive detector based on a CCD camera, in θ–2θ geometry. The first tests were performed with thin metal foils and some iron oxide mixtures. A time resolution of lower than 1 s together with a spatial resolution in one dimension of at least 50 mm is achieved.
The nature of the bound water in solids with hydrogen-bonded networks depends not only on temperature and pressure but also on the nature of the constituents. The collapse and reorientation of these network structures determines the stability of hydrated solids and transitions to other crystalline or amorphous phases. Here, we study the mechanochemically induced loss of bound water in Co₃(PO₄)₂·8H₂O and compare this process to the behavior under hydrostatic pressure.
The associated phase transition and its kinetics were monitored by X-ray powder diffraction with Synchrotron radiation and quantitative IR spectroscopy. High shearing forces are responsible for the degradation of the hydrogen-bonded network and the concomitant crystalline–amorphous transformation. UV/Vis spectroscopy, extended X-ray absorption spectroscopy (EXAFS), and X-ray absorption near-edge spectroscopy (XANES) provided information about the short-range order in the amorphous solid, and thermal analysis revealed its composition and showed that the moderate charge densities of the Co²⁺ and PO₄³⁻ ions, which make the hydration enthalpy comparable to the binding energy of the counteranions, and the Formation of hydrogen-bonded networks favor multistage crystallization processes associated with the release and uptake of coordinated water. The changes of the Co²⁺ coordination induce a color change from pink to blue; therefore, Co₃(PO₄)₂·8H₂O can be used as an overheat temperature indicator.
We describe a fast and effective synthesis for molecular metal phosphonates. Isomorphic compounds [M(II)(HO₃PPh)₂(H₂O₃PPh)₂(H₂O)₂] (M = Mn (1), Co (2), Ni (3); Ph = C₆H₅) were obtained by grinding. The complexes are mononuclear compounds containing neutral and monodeprotonated phenylphosphonic acid and water as ligands. The crystal structures were determined using powder X-ray diffraction (PXRD) data and validated by extended X-ray absorption fine structure (EXAFS) data. Combined synchrotron XRD measurements and Raman spectroscopy were conducted for investigating the reactions in situ. Based on these data, the intermediates were characterized and the formation mechanism was derived.
The transformation of amorphous precursors into crystalline solids and the associated mechanisms are still poorly understood. We illuminate the formation and reactivity of an amorphous cobalt phosphate hydrate precursor and the role of water for its crystallization process. Amorphous cobalt phosphate hydrate nanoparticles (ACP) with diameters of ∼20 nm were prepared in the absence of additives from aqueous solutions at low concentrations and with short reaction times. To avoid the kinetically controlled transformation of metastable ACP into crystalline Co₃(PO₄)₂ × 8H₂O (CPO) its separation must be fast. The crystallinity of ACP could be controlled through the temperature during precipitation. A second amorphous phase (HT-ACP) containing less water and anhydrous Co₃(PO₄)₂ was formed at higher temperature by the release of coordinating water. ACP contains approximately five molecules of structural water per formula unit as determined by thermal analysis (TGA) and quantitative IR spectroscopy. The Co²+ coordination in ACP is tetrahedral, as shown by XANES/EXAFS spectroscopy, but octahedral in crystalline CPO. ACP is stable in the absence of water even at 500 °C. In the wet state, the transformation of ACP to CPO is triggered by the diffusion and incorporation of water into the structure. Quantitative in situ IR analysis allowed monitoring the crystallization kinetics of ACP in the presence of water.
The crystal structures and syntheses of four different copper(II) phenylphosphonates, the monophenylphosphonates α-, β-, and γ-Cu(O3PC6H5)·H2O (α-CuPhPmH (1) β-CuPhPmH (2) and γ-CuPhPmH (3)), and the diphosphonate Cu(HO3PC6H5)2·H2O (CuPhP2mH (4)), are presented. The compounds were synthesized from solution at room temperature, at elevated temperature, under hydrothermal conditions, and mechanochemical conditions. The structures of α-CuPhPmH (1) and CuPhP2mH (4) were solved from powder X-ray diffraction data. The structure of β-CuPhPmH (2) was solved by single crystal X-ray analysis. The structures were validated by extended X-ray absorption fine structure (EXAFS) and DTA analyses. Disorder of the crystal structure was elucidated by electron diffraction. The relationship between the compounds and their reaction pathways were investigated by in situ synchrotron measurements.
The adsorption behavior of Platinum nanoparticles was studied for the as-received catalyst (under inert gas), under hydrogen and CO atmosphere using our newly designed in-situ cell. X-ray Absorption Spectroscopy (XAS) and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) experiments were performed simultaneously with high data quality. Structural information and the type of adsorbate could be revealed via Extended X-ray Absorption Fine Structure (EXAFS) analysis, Δμ X-ray Absorption Near Edge Structure analysis (Δμ XANES) and in-situ DRIFTS. The as-received catalyst showed sub-surface oxygen and O(n-fold). Under CO atmosphere only CO(atop) was found. Reversible adsorbate induced changes of the Pt nanoparticle structure were derived from changes in the Pt-Pt coordination number and the corresponding bond distance. Under reducing conditions (H2, CO) a significant increase in both values occurred. Temperature dependent desorption of CO revealed a gradual shift from Pt-CO to Pt-O. Reoxidation was clearly assigned to strong metal support interaction from the SiO2 support.
The adsorption behavior of Platinum nanoparticles was studied for the as-received catalyst (under inert gas), under hydrogen and CO atmosphere using our newly designed in-situ cell. X-ray Absorption Spectroscopy (XAS) and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) experiments were performed simultaneously with high data quality. Structural information and the type of adsorbate could be revealed via Extended X-ray Absorption Fine Structure (EXAFS) analysis, Dl X-ray Absorption Near Edge Structure analysis (Dl XANES) and in-situ DRIFTS. The as-received catalyst showed sub-surface oxygen and O(n-fold). Under CO atmosphere only CO(atop) was found. Reversible adsorbate induced changes of the Pt nanoparticle structure were derived from changes in the PtAPt coordination number and the corresponding bond distance. Under reducing conditions (H2, CO) a significant increase in both values occurred. Temperature dependent desorption of CO revealed a gradual shift from PtACO to PtAO. Reoxidation was clearly assigned to strong metal support interaction from the SiO2 support.
A new concept that comprises both time- and lateral-resolved X-ray absorption fine-structure information simultaneously in a single shot is presented. This uncomplicated set-up was tested at the BAMline at BESSY-II (Berlin, Germany). The primary broadband beam was generated by a double multilayer monochromator. The transmitted beam through the sample is diffracted by a convexly bent Si (111) crystal, producing a divergent beam. This, in turn, is collected by either an energy-sensitive area detector, the so-called color X-ray camera, or by an area-sensitive detector based on a CCD camera, in θ-2θ geometry. The first tests were performed with thin metal foils and some iron oxide mixtures. A time resolution of lower than 1 s together with a spatial resolution in one dimension of at least 50 µm is achieved.