Filtern
Dokumenttyp
- Zeitschriftenartikel (14) (entfernen)
Sprache
- Englisch (14)
Schlagworte
- LIBS (5)
- Welding (4)
- In situ measurement (3)
- Neutron imaging (3)
- Austenite-to-martensite transformation (2)
- Bragg-edge imaging (2)
- Chemical composition (2)
- Debye–Waller factor (2)
- Duplex stainless steel (2)
- Gas tungsten arc welding (GTAW) (2)
- Low transformation temperature (LTT) steel (2)
- Neutron radiography (2)
- TIG welding (2)
- 2101 duplex stainless steel (1)
- Austenitic (1)
- Austenitic stainless steel (1)
- Austenitic stainless steels (1)
- Backlight (1)
- Bragg-edge neutron 2D imaging (BENI) (1)
- Computed tomography (1)
- Crystallographic texture control (1)
- Debye-Waller-Faktor (1)
- Diffusible hydrogen (1)
- EDS (1)
- Electron backscatter diffraction (EBSD) (1)
- Evaporation (1)
- Ferritic stainless steel (1)
- Hydrogen (1)
- Hydrogen assisted cracking (1)
- Hydrogen embrittlement (1)
- Hydrogen measurement (1)
- IN718 PBF-LB/M (1)
- In situ (1)
- LIBS TIG welding (1)
- Measurement (1)
- Metal additive manufacturing (MAM) (1)
- Metal vapor (1)
- Microcracking (1)
- Microstructure (1)
- Modified Varestraint Transvarestraint (1)
- Refraction (1)
- Scattering (1)
- Solidification cracking (1)
- Stainless steel (1)
- Stainless steels (1)
- Supermartensitic steel (1)
- Susceptibility (1)
- Synchrotron radiation (1)
- TIG (1)
- X-ray refraction (1)
- XRF (1)
Organisationseinheit der BAM
- 9.4 Integrität von Schweißverbindungen (14) (entfernen)
This study was carried out to investigate the neutron transmission signal as a function of sample temperature during a welding process. A theoretical description that includes the Debye-Waller factor was used to describe the temperature influence on the neutron crosssections. Neutron imaging using a monochromatic beam helps to observe transmission variations related to the material temperature. In-situ neutron imaging of welding experiments show the distribution of the temperature in bulk steel samples. The performed finite element modelling of expected temperature distributions shows good agreement with the obtained experimental data.
Polychromatic and wavelength-selective neutron transmission radiography were applied during bead-on-plate welding on 5 mm thick sheets on the face side of martensitic low transformation temperature (LTT) steel plates using gas tungsten arc welding (GTAW). The in situ visualization of austenitization upon welding and subsequent α’-martensite formation during cooling could be achieved with a temporal resolution of 2 s for monochromatic imaging using a single neutron wavelength and of 0.5 s for polychromatic imaging using the full spectrum of the beam (white beam). The spatial resolution achieved in the experiments was approximately 200 µm. The transmitted monochromatic neutron beam intensity at a wavelength of λ = 0.395 nm was significantly reduced during cooling below the martensitic start temperature Ms since the emerging martensitic phase has a ~10% higher attenuation coefficient than the austenitic phase. Neutron imaging was significantly influenced by coherent neutron scattering caused by the thermal motion of the crystal lattice (Debye–Waller factor), resulting in a reduction in the neutron transmission by approx. 15% for monochromatic and by approx. 4% for polychromatic imaging.
Polychromatic and wavelength-selective neutron transmission radiography were applied during bead-on-plate welding on 5 mm thick sheets on the face side of martensitic low transformation temperature (LTT) steel plates using gas tungsten arc welding (GTAW). The in situ visualization of austenitization upon welding and subsequent α’-martensite formation during cooling could be achieved with a temporal resolution of 2 s for monochromatic imaging using a single neutron wavelength and of 0.5 s for polychromatic imaging using the full spectrum of the beam (white beam).
The spatial resolution achieved in the experiments was approximately 200 µm. The transmitted monochromatic neutron beam intensity at a wavelength of λ = 0.395 nm was significantly reduced during cooling below the martensitic start temperature M s since the emerging martensitic phase has a ~10% higher attenuation coefficient than the austenitic phase. Neutron imaging was significantly influenced by coherent neutron scattering caused by the thermal motion of the crystal lattice (Debye–Waller factor), resulting in a reduction in the neutron transmission by approx. 15% for monochromatic and by approx. 4% for polychromatic imaging.
Chemical compositions of a weld can be varying locally as a result of the welding process. These local variations can be due to the vaporization of individual alloying elements. In this work, tungsten inert gas (TIG) bead-on-plate stainless steel welds of EN grade 1.4404 and 1.4435 were investigated using laser-induced breakdown spectroscopy (LIBS) on the completed welds. This study aims to reveal the welding parameters’ influence on the resulting local chemical compositions of the stainless steel welds. We demonstrated Mn vaporize before Cr due to its lower latent enthalpy of vaporization. Hence, Mn accumulates on the heat-affected zone (HAZ) both sides across the weld bead by being swept away through the circulation flow of the welding plasma. Additionally, increasing the heat input tends to enhance the accumulated Mn content on the HAZ as well as increasing the shielding gas flow rate. The results are in good agreement with the literature and proved that LIBS is an effective method to inspect completed welds.