Filtern
Dokumenttyp
- Vortrag (13) (entfernen)
Sprache
- Englisch (13) (entfernen)
Referierte Publikation
- nein (13)
Schlagworte
- Biofilm (6)
- Black fungi (3)
- Knufia petricola (3)
- Solar panel (3)
- Biodeterioration (2)
- Microcolonial fungi (2)
- Sub-aerial biofilms (2)
- Ascomycetes (1)
- Biosphere-technosphere interaction (1)
- Black yeast (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (13)
The interface between materials and the environment is populated by microorganisms which organize on surfaces to form specially adapted and resistant microbial associations, so-called biofilms. Surface-bound biofilm growth is associated with substantial secretion of metabolic products that can significantly influence material corrosion. Here, a group of material-inhabiting fungi are presented, which colonize and weather air-exposed materials such as building façades, roofs and solar systems. A selected model fungus is used to carry out genetic and molecular biology experiments, which are microbiologically cutting-edge and allow for the development of novel time-saving techniques for material testing. The degree of material damage under the influence of this model fungus shows a measure of the aggressiveness of the biofilm under defined environmental conditions - and thus explores fundamental components of the interaction between material and biofilm.
The interface between materials and the environment is populated by microorganisms which organize on surfaces to form specially adapted and resistant microbial associations, so-called biofilms. Surface-bound biofilm growth is associated with substantial secretion of metabolic products that can significantly influence material corrosion. Here, a group of material-inhabiting fungi are presented, which colonize and weather air-exposed materials such as building façades, roofs and solar systems. A selected model fungus is used to carry out genetic and molecular biology experiments, which are microbiologically cutting-edge and allow for the development of novel time-saving techniques for material testing. The degree of material damage under the influence of this model fungus shows a measure of the aggressiveness of the biofilm under defined environmental conditions - and thus explores fundamental components of the interaction between material and biofilm.
A new tool in material science - Targeted disruption of melanin synthesis in rock-inhabiting fungi
(2016)
The ability to survive almost absolute dehydration through air-drying is a remarkable feature of rock-inhabiting microcolonial fungi (MCF), which colonise rock surfaces in hot and cold deserts. Understanding of the underlying mechanisms which allow this group of fungi to conquer natural and man-made environments requires a set of modern biological techniques and approaches that are under development in our laboratory. We will present an overview of the targeted disruption of melanin biosynthesis genes in the rock-inhabiting Knufia petricola and give inside into the lines of research and the network of supporting laboratories that made this progress possible.
Essential processes in the establishment and maintenance of rock biofilms include photosynthesis, production of extracellular polymeric substances, substrate penetration and atmospheric nutrient enrichment. Functional diversity is supported by a complex subaerial biofilm (SAB) community of heterotrophic and phototrophic microorganisms. Stress tolerant and melanised Ascomycetes dominate heterotrophic SABs while diverse algae and cyanobacteria comprise the phototrophic consortia. Laboratory simulation of SABs permits use of molecular-genetic methods coupled with geochemical and microscopic analyses to study weathering. Our in vitro model includes two free-living and symbiosis-competent, genetically tractable microorganisms: the cyanobacterium Nostoc punctiforme and the microcolonial rock-inhabiting fungus Knufia petricola. This genetically amenable cyanobacterium/fungus model biofilm allows development of quantitative methods tailored to the natural diversity of SABs. Precise, reproducible studies using this model biofilm have shown that both the melanised fungus, as well as the combined bacterial/fungal system, enhances the weathering of minerals. Geochemical signatures of these in vitro rock biofilms can now be obtained and compared with bacterial/fungal mutants of varied EPS composition and substrate penetration patterns. And finally, precise study of the model cyanobacterium/fungus biofilm will Permit prediction of the effects of conservational treatments.
Essential processes necessary for the establishment and maintenance of rock biofilms include photosynthesis, production of extracellular polymeric substances, substrate penetration and nutrient enrichment from the atmosphere. This natural functional diversity is supported by a complex biofilm community consisting of heterotrophic and phototrophic microorganisms. While heterotrophic rock biofilm-formers are dominated by stress-tolerant microcolonial ascomycetes, phototrophs might be represented by diverse algae and cyanobacteria. Reduction of model systems to the genetically tractable minimum, a proven successful experimental strategy in different symbiotic systems, is now applied to rock biofilms. These complex and important natural systems are simulated in the lab using genetic methods coupled with continuous microscopic and analytical (microscopic as well as geochemical and biochemical) observations. Our in vitro bipartite model includes free-living and symbiosis-competent, genetically tractable microorganisms – a rock-inhabiting fungus Knufia petricola A95 and a cyanobacterium Nostoc punctiforme strain ATCC 29133. To accurately reflect the development of a rock biofilm, contacts of these two genetically tractable partners are studied under well-controlled laboratory conditions. This experimental strategy is strongly supported by the knockout mutants of Knufia petricola which have been recently created and will be compared in their action on mineral surfaces. An impact of Knufia petricola strain A95 with or without protective pigments on mineral adhesion and alteration will be presented.
Soil formation on weathering rock surfaces is intrinsically connected with the development of primary microbial colonization at the atmosphere-lithosphere interface. A great number and variety of microorganisms is involved in these microbial communities, which are dominated by fungi, algae, cyanobacteria and heterotrophic bacteria. Rock-inhabiting life is ubiquitous on rock surfaces all around the world, but the laws of its establishment, and more important, quantification of its biodeterioration and geological input are possible only in well-controlled and simplified laboratory models. Here we would like to compare two model rock biofilm consisting of the heterotrophic and the phototrophic interacting partners. In the present work the growth of these model biofilms on diverse materials with different physical and chemical properties was investigated under well-controlled laboratory conditions. To clarify the role of environmental factors, the parameters temperature, light intensity and relative humidity were varied in growth test series. For an accelerated substrate colonization and to increase the biomass yield different flow-through chambers systems with semi-continuous cultures have been applied, simulating weathering conditions like flooding, desiccation and nutrient input. The biofilm development was studied by (i) confocal laser scanning and electron microscopy and (ii) qualitatively and quantitatively with respect to cell forms and biomass. A correlation between the presence of the model biofilm and mineral surface alteration as well as geochemical tracers of weathering were followed on various rock substrates (with differing geochemistry, porosity etc) exposed in another flow-through chamber, filled with crushed rock material. Under mentioned environmental conditions different types of flow-through chambers have been used and will be compared.
Simple, microbial biofilms have prevailed since life began on Earth. Biofilms form at the interfaces of solids with gases or liquids and have multiple effects on Substrate and element cycles. In geobiological terms, the most interesting microbial communities are those that form on solids exposed to air (subaerial). Microbial colonisers of the atmosphere-lithosphere interface include algae, cyanobacteria, fungi as well as heterotrophic bacteria and they have colonised virtually every rock surface throughout the entire geological history of the Earth. In addition to sequestering carbon, sub-aerial biofilms (SABS) actively participate in rock weathering. Rock-inhabiting SABs are the primary settlers on lava following volcanic eruptions and on rocks following the retreat of glaciers. SABs especially dominate hostile environments in which growth of higher Vegetation is restricted especially in deserts, polar- and alpine regions. SABs are the primary colonisers of lithospheric (e.g. rocks) and anthropogenic Substrates (buildings, monuments, solar panels, etc.). Life at the solid material/atmosphere interface influences and is affected by both the underlying Substrate and the microclimate surrounding it. Although subaerial life is ubiquitous, how SABs develop and importantly degrade underlying Substrates can only be clarified in well-controlled experiments that often involve simplified model Systems, So far, biofilm development on solar panels has been studied using; (i) metagenomics; (ii) in situ microscopy; and (iii) classical microbiological methods that are both qualitative and quantitative. Here we suggest that solar panel biofilms are accessible and highly relevant objects to study microbial ecology, geobiology and biodeterioration.
Black ascomycetous microcolonial fungi (MCF) are persistent inhabitants of rock surfaces in deserts as well as ubiquitous in other wide-spread terrestrial ecosystems including man-made materials such as solar panels. Applied research is necessary to find ways of preventing MCF from colonising and degrading solar panels and historic monuments.
In the modern world there is an increased understanding that design and performance monitoring of materials have to be tested in connection to chemical, physical and (micro)biological challenges. A systematic study on how biofilms interact with materials and what could be done to engineer biofilms and/or materials in order to maximize the resistance of the material (surface) or the resistance the biofilm-modified material (bulk) is in strong need. In the Department “Materials and the Environment” of the BAM new experimental platform is being developed. With the help of different type of device for high throughput and microbiologically-controlled environment simulation we establish a new approach to clarify the mechanisms of biofilm/material interactions. Despite the focus on fundamental research, the main results of this project proposal will be transferable into material technology and construction chemistry and will influence the development of standardization in this topic. As the interactions of biofilms and materials have implications for most constructions as well as climate change, the results of the research generates additional value.
Interface between the atmosphere and mineral substrates is the oldest terrestrial habitat. Morphologically simple microbial biofilms were the first settlers on these inhospitable surfaces at times when the Earth was inhabited only by microorganisms and the solid substrates represented only by natural rock surfaces i.e. lithosphere. Miniature, self-sufficient microbial ecosystems continue to develop on subaerial (i.e. air-exposed) solid surfaces at all altitudes and latitudes where direct contact with the atmosphere and solar radiation occurs – on rocks, mountains, buildings, monuments, solar panels. All these sub-aerial biofilms develop under fluctuating and hostile conditions – and thus frequently harbour stress-tolerant black fungi inherently able to cope with the stresses of bright sunlight and constantly changing atmospheric conditions. Black fungi – a polyphyletic group of Ascomycetes– accumulate the dark pigment DHN melanin, diverse carotenoids and mycosporines in their cells and thus successfully colonise sunlight-flooded habitats from phyllosphere to rock surfaces. Various chemical and physical extremes and fluctuating environments belong to the challenges effectively mastered by black fungi. In our laboratory we isolate novel black fungi from man-made habitats like building materials and solar panels. Using Knufia petricola A95 as a model we conduct experiments to clarify interactions of black fungi with inorganic substrates. We use available mutants to determine the functional consequences of changes in the outer cell wall envelopes – from excreted EPS to layers of protective pigments. A genetic toolbox to manipulate this Chaetothyriales representative is in further development. Our long-term goal is to understand the fundamental mechanisms how black fungi are able (i) to adhere to dry atmosphere-exposed surfaces, (ii) to survive multiple stresses and (iii) to change the underlying substrates including rocks.