Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (105) (entfernen)
Referierte Publikation
- ja (105) (entfernen)
Schlagworte
- Plasma polymerization (20)
- NEXAFS (11)
- Plasma (11)
- Allyl alcohol (6)
- Polystyrene (6)
- Surface modification (6)
- XPS (6)
- Adhesion (5)
- Polymer (5)
- ToF-SIMS (5)
- ESCA/XPS (4)
- Pulsed plasma (4)
- Surface functionalization (4)
- Ageing (3)
- Bromination (3)
- Fire retardant (3)
- Flame retardancy (3)
- Fluorescence spectroscopy (3)
- Functional groups (3)
- Oberflächenanalyse (3)
- Plasma bromination (3)
- Plasma modification (3)
- Plasma polymers (3)
- Polyethylene (3)
- Polyethylene (PE) (3)
- Polymer functionalization (3)
- Polypropylene (3)
- Underwater plasma (3)
- Aerosol-assisted DBD (2)
- Brominated carbon nanotubes (2)
- Capillary discharge (2)
- Carbon nanotubes (2)
- Chemical characterization (2)
- Coupling methods (2)
- Curing (2)
- Dielectric properties (2)
- Dip-coating (2)
- Electrospray deposition (2)
- Ethylene (2)
- Funktionelle Gruppen (2)
- Grafting (2)
- Melamine resin (2)
- Methylated poly(melamine-co-formaldehyde) (2)
- Nanotubes (2)
- Oxidation (2)
- Oxygen DC plasma treatment (2)
- Peel strength (2)
- Plasma treatment (2)
- Plasma-chemical technique (2)
- Polymeroberfläche (2)
- Polymeroberflächen (2)
- Pulsed plasma polymerization (2)
- Röntgenadsorptionsspektroskopie (2)
- SIMS (2)
- Spacer grafting (2)
- Surface and bulk characterization (2)
- Thermal stability (2)
- Thin films (2)
- Acethylene (1)
- Acrylic acid (1)
- Acrylic acid-styrene copolymer (1)
- Acrylic acidstyrene copolymer (1)
- Adhesion PP-Al (1)
- Adhesion polypropylene-aluminium (1)
- Adhesion promoters (1)
- Adhesion promotion (1)
- Adhesion-promoting interlayers (1)
- Adhesion-promoting layers (1)
- Ageing of polyolefins (1)
- Aggregation (1)
- Alexa dyes (1)
- Allylamine (1)
- Aluminium (1)
- Amine derivatives (1)
- Amine-functionalized polymer (1)
- Ammonia plasma (1)
- Ammonia plasma treatment (1)
- Amorphous carbon (1)
- Anti-oxidative behaviour (1)
- Anti-oxidative efficiency (1)
- Argon plasma (1)
- Arrays (1)
- Artificial weathering (1)
- Atmospheric pressure plasma treatment (1)
- Attenuated total reflectance-Fourier transorm infrared spectroscopy (1)
- Barrier formation against solvent permeation (1)
- Biaxially streched poly(ehtylene terephthalate) (1)
- Bromalkylierung (1)
- Bromierung (1)
- Bulk properties (1)
- Butadiene (1)
- C plasma (1)
- C pulsed (1)
- C radio frequency (1)
- CNT (1)
- CNTs (1)
- Capillary-sample distance (1)
- Carbon fiberepoxy resin laminates (1)
- Catalytic activity (1)
- Cathodic arc discharge (1)
- Chemical reduction of functional groups (1)
- Chlorination (1)
- Chromium-polymer intermediates (1)
- Co-polymers (1)
- Cone calorimeter (1)
- Continuous-wave plasma (1)
- Copolymer hydrogel (1)
- Copolymerisation (1)
- Copolymers (1)
- Covalent labeling (1)
- Covalent labeling of polymer surfaces (1)
- Crosslinking (1)
- Cucurbituril (1)
- D nitrogen (1)
- D oxygen (1)
- DX plasma deposition (1)
- Defects (1)
- Degradation (1)
- Deposition of fluorine-containing plasma polymers (1)
- Deposition process (1)
- Deuterated ammonia (1)
- Deuterated polyolefins (1)
- Dielectric barrier discharge (1)
- Dielectric barrier discharge (DBD) (1)
- Dielectric relaxation (1)
- Discharge (1)
- Disulfides (1)
- Donoracceptor compound (1)
- Doping with metal atoms (1)
- Dynamic mobility (1)
- Einschichtsystem (1)
- Electrospray ionization (1)
- Electrospray ionization (ESI) (1)
- Encapsulation of nanoparticles (1)
- FTIR (1)
- Fenton-like processes (1)
- Film (1)
- Film morphology (1)
- Film, metallisiert (1)
- Flame retardance (1)
- Flame retardants (1)
- Fluor (1)
- Fluorescence (1)
- Fluorescent label (1)
- Fluorescent particles (1)
- Fluorescent probe (1)
- Fluorination kinetics (1)
- Formation of double bonds (1)
- Fragmentation-recombination (1)
- Functionalization (1)
- Functionalization of polymer (1)
- Functionalization of polymers (1)
- Gas phase fluorination of PE (1)
- Glow discharge electrolysis (GDE) (1)
- Gold nanoparticles (1)
- Gold surface (1)
- Grafting of diamines (1)
- Graphene (1)
- Graphite (1)
- H-D exchange (1)
- HOPG (1)
- Heat release (1)
- Heterogeneous catalysis (1)
- Hexamethyldisiloxane plasma polymer (1)
- Hexatriacontane (1)
- Hydrogen peroxide (1)
- Hydrogen-deuterium exchange (1)
- Hydroperoxyl radicals (1)
- Hydroxyl functionalization (1)
- IR (1)
- Inhibition rate constant (1)
- Interface design (1)
- Interfacial polymer-metal redox reactions (1)
- Ionization mass spectrometry (1)
- Katalyse (1)
- Kinetics (1)
- LDPE (1)
- Layer topography (1)
- Layer-by-layer deposition (1)
- Lewis Säure (1)
- Linear and branched polyethylene (1)
- Liquid adsorption chromatography (1)
- Liquid chromatography (1)
- Long-term stability (1)
- Low pressure plasma (1)
- Low pressure plasma pretreatment (1)
- Low-pressure RF oxygen plasma (1)
- MALDI (1)
- MALDI-TOF-MS (1)
- Macromolecular plasma (1)
- Manganese naphthenate (1)
- Matrix-assisted laser desorption (1)
- Mechanism (1)
- Melamine precursors (1)
- Mercaptans (1)
- Metal-polymer adhesion (1)
- Metal-polymer composites (1)
- Metal-polymer systems (1)
- Metallization with chromium (1)
- Model cumene oxidation (1)
- Modification surfaces (1)
- Modified surfaces (1)
- Molar mass (1)
- Molecular orientation at polymer surfaces (1)
- Monolayer (1)
- Monolayers and polymer brushes (1)
- Monotype functional groups (1)
- Multi-walled carbon nanotubes (1)
- Nanobiotechnology (1)
- Nanoparticles (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Oil diesel fraction (1)
- Oil hydrocarbons liquid-phase oxidation (1)
- Organic graphting (1)
- Oxidation catalysts (1)
- Oxidation rate (1)
- Oxygen plasma (1)
- PE (1)
- PET (1)
- PTFE (1)
- Paraffinoxidation (1)
- Permeation (1)
- Permeation mechanism of solvent mixtures (1)
- Photoelectron spectroscopy (1)
- Plasma co-polymerization (1)
- Plasma copolymer (1)
- Plasma copolymerisation (1)
- Plasma copolymers (1)
- Plasma degradation (1)
- Plasma deposition (1)
- Plasma emitted radiation (1)
- Plasma fluorination of polymers (1)
- Plasma functionalization (1)
- Plasma parameter (1)
- Plasma polymer (1)
- Plasma surface treatment (1)
- Plasma-polymerized poly(allylamine) (1)
- Plasmapolymer (1)
- Plasmapolymerisation (1)
- Poly(acetylene) (1)
- Poly(ethylene terephthalate) (1)
- Poly(tetrafluoroethylene) (1)
- Polyamides (1)
- Polyethylene composites (1)
- Polymer aerosols (1)
- Polymer surface (1)
- Polymer surface functionalization (1)
- Polymer surface modification (1)
- Polymer surfaces (1)
- Polymer-Oberflächenfunktionalisierung (1)
- Polymer-aluminium bonds (1)
- Polymer-copper bonds (1)
- Polymer-metal bonds (1)
- Polymer-metal composites (1)
- Polyolefins (1)
- Polystyrene (PS) (1)
- Polytetrafluoroethylene (1)
- Polyurethane-polypropylene adhesion (1)
- Polyvinylchloride (1)
- Pore modification (1)
- Pressure-pulsed plasma (1)
- Protective shell (1)
- Pyrylium label (1)
- Quantification (1)
- Quantum yields (1)
- Radical formation (1)
- Radical polymerization (1)
- Radical scavenger (1)
- Rate of model oxidation (1)
- Relevance of functional groups to adhesion (1)
- Residual solvent (1)
- SERS (1)
- Selective plasma process (1)
- Selective plasma processes (1)
- Short-time exposure (1)
- Silica (1)
- Softener (1)
- Spacer (1)
- Spektroskopie (1)
- Sperrschicht (1)
- Stability (1)
- Structure (1)
- Structure of plasma polymers (1)
- Styrene (1)
- Surface characterization (1)
- Surface labeling (1)
- Surface wettability (1)
- Surface-enhanced infrared absorption (SEIRA) (1)
- Synthetic petroleum acids (1)
- TOF-SIMS (1)
- Tailored interface structures (1)
- Thermoluminescence (1)
- Thick melamine layers (1)
- Thin film properties (1)
- Thin polymer layers (1)
- Thiocarbonyl group (1)
- Thiols (1)
- UHMWPE membrane (1)
- UV radiation (1)
- UV-spectrometry (1)
- Ultra-thin layers (1)
- Vacuum deposition (1)
- Weathering (1)
- X-ray absorption spectroscopy (NEXAFS) (1)
- X-ray photoelectron spectroscopy (1)
- Xanthene dyes (1)
Chemical heterogeneities and molecular weight distributions of poly(ethylene oxide) (PEO)-co-polymethylene (PM) model oligomers, which are relevant to the synthesis of commonly used tensides, were investigated. For analytical characterization, the well-known principle of liquid adsorption chromatography at 'critical conditions' (LACCC) was modified. Near the critical conditions of adsorption of the PEO unit, e.g., at slight adsorption conditions of PM, the copolymers could be separated according to their PM chain length. The eluates were separated and single fractions of each peak were continuously transferred onto the MALDI target by means of a commercially available device. Simultaneously, the MALDI matrix solution was continuously added with a second pump. This procedure offers the possibility of the formation of homogeneous matrix-polymer textures. By MALDI-MS a complete characterization of the chemical composition (PEO and PM chain length) of each peak could be achieved. The obtained MALDI mass spectra of the eluates at different retention times could be used for the molecular weight calibration of the LAC system. In this way, an additional application of SEC, as in conventional 2D-chromatography, was avoided by using the MALDI method as quasi chromatographic separation
Organic thin films with defined chemical structures and physical properties are required for various applications. Plasma polymerization is of technological interest, since the deposition of plasma polymers is possible on any material of any shape in the desired thickness. We report on the TOF-SIMS (TOF: time-of-flight) and XPS investigations of pulse plasma poly(acetylene) and alkali metal doped pulse plasma poly(acetylene) films. The combination of TOF-SIMS and XPS supplies detailed information on the surface chemistry of these films. Application of both methods provides the possibility for cross-checking certain results. Moreover the different sensitivities of the methods can be utilized. According to the TOF-SIMS and XPS data it can be concluded that the interaction of alkali metals with plasma poly(acetylene) results in electrovalent bonds of the type Me?+C?- between carbon and metal. Furthermore carbonoxygenmetal interactions were observed. These interactions are of the type C=O?-cdots, three dots, centeredMe?+ and/or CO?-Me?+.
Single walled carbon nanotubes (SWNT) have been produced in an electric arc discharge by using a graphite rod as anode which is filled with a powder mixture of graphite and metallic catalysts like nickel and yttrium. The soot material containing approximately a third of SWNT was collected from the cathode region as a soft, voluminous material. The main by-products in this process are amorphous carbon and graphitic nanoparticles which have to be removed by an appropriate purification process. The as-produced soot material was purified by gas phase oxidation in air at 355 °C. The oxidation of amorphous carbon in air is advantageous against wet chemical methods because it is better controllable. Thermogravimetric analysis and electron microscopy were used to investigate the oxidation behavior of the different kinds of carbon. Oxidation of SWNT and amorphous carbon occurs simultaneously even at moderate temperatures, whereas amorphous carbon is more rapidly oxidized than SWNT. For optimizing the purification procedure by gas phase oxidation, kinetic studies were used to determine the oxidation time for each component in the soot at a given temperature. So it is possible to remove the amorphous carbon quantitatively with minimal losses of SWNT. But it was found that graphitic nanoparticles have the highest stability against oxidation and could therefore not be quantitatively removed by this method without the complete destruction of SWNT. Therefore, the electric arc discharge process has to be a controlled process for minimum production of graphitic nanoparticles to obtain a material with a high content of SWNT.
Barrier properties of plasma and chemically fluorinated polypropylene and polyethyleneterephthalate
(1995)
The functionalization, perfluorination or an coating of polypropylene (PP) and polyethyleneterephthalate (PET) surfaces in different plasma atmospheres and in an F[2] + N[2] gas mixture were investigated. The aim of this work was to form a barrier layer against solvent and fuel permeation. Typical test solvents were n-pentane, toluene, tetrachloroethylene and mixtures of n-pentane and methanol. The permeation was gravimetrically measured. The permeation of the solvent mixtures was analyzed by mass spectrometry and Fourier transform IR spectroscopy. The permeation of the solvent mixtures through the plasma-modified polymer samples was associated with increased absorption of polar solvent components in the polymer film. The thickness of the plasma-fluorinated PP surface layer was 10-100 nm and that of chemically fluorinated PP about 5000 nm. Nearly the same barrier efficiency was measured for both plasma- and chemically fluorinated samples.
Functional groups bearing monomers were pulsed plasma polymerised with a degree of retained functional groups of 5591%. The following functional groups could be produced at a maximum of: 30 OH, 18 NH2, and 24 COOH per 100 C atoms. A plasma-initiated radical copolymerisation could also be realised using the functional group bearing monomers as a source of functionalities, olefins as chain-extenders and dienes as chemical cross-linkers. The peel strengths of Al layers on such plasma polymers were correlated to the type and density of functional groups.
The retention of chemical structure and functional groups during pulsed plasma polymerization was used for producing adhesion-promoting plasma polymer layers with high concentrations of exclusively one kind of functional groups, such as OH, NH2, or COOH. The maximum content of functional groups was 31 OH using allyl alcohol, 18 NH2 using allylamine, or 24 COOH per 100 C atoms using acrylic acid. To vary the density of functional groups, chemical co-polymerization with ethylene as 'chain-extending' co-monomer, or butadiene as 'chemical crosslinker' was initiated in the pulsed plasma. The composition of these co-polymers was investigated by XPS and IR spectroscopy. The concentrations of functional groups were measured by derivatizing with fluorine-containing reagents and using XPS. A set of plasma parameters was found to be a good compromise between a high number of functional groups and complete insolubility in water, ethanol or THF,which is needed for further chemical processing. Here, these monotype-functionalized surfaces were used in metal-polymer systems as adhesion-promoting interlayers to examine the influence of type and density of functional groups on adhesion. As expected, COOH- and OH-group-terminated interlayers showed maximum peel strengths to evaporated aluminium layers. The adhesion increased linearly with the number of OH groups to a maximum at about 27 OH per 100 C atoms. Higher concentrations of OH groups did not increase the peel strength further.
Polyethylene foils, used as greenhouse foils stabilized with various types of sterically hindered amine light stabilizers (HALS), showed an extraordinary prolonged lifetime on exposure to natural or artificial weathering if a gas-phase fluorination under low-pressure conditions was applied. The fluorination was performed using F2/N2 mixtures and provided ca. 50 F/100 C (fluorination degree ap25%). The lifetimes of fluorinated PE foils on exposure to artificial or natural weathering were increased at least by a factor of 2-4 as measured in terms of tensile strength and elongation at break.
The effect of the composite plasma parameter P/F, where P is the plasma power and F is the monomer flow rate, on the chemical character of pulsed plasma deposited allyl alcohol films was investigated by ToF-SSIMS. Information on the unsaturated character, the cross-linked and/or branched character of the plasma polymer films was derived in detail. The problem of the retention of OH groups in plasma deposited allyl alcohol films was elucidated in detail using SSIMS data. The lowest conversion rate from the monomer's hydroxyl groups to other oxygen functionalities in the plasma was concluded for the plasma polymer film produced at a P/F ratio of 0.05 W · sccm-1. It was found that the overall oxygen content of the films decreased vs. increasing P/F ratio. Because the freshly prepared films were investigated without air exposure, ageing on ambient air could be studied in detail. It was found that in the case of plasma deposited allyl alcohol films the ageing on air is probably based on two competing processes which are discussed in detail. Additionally, a review of literature data on the characterization of plasma deposited allyl alcohol films is given.
Plasma-deposited polymer films were prepared from organic molecules and investigated using near edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) for aging effects after exposure to air. Results from the investigation of homopolymers are summarized. Primarily the effect of the deposition parameters duty cycle and power are dealt with. The effect of the deposition parameter pressure is briefly discussed. An example to show the effect of feed gas composition on the aging of plasma polymerized ethylene/allyl alcohol and styrene/allyl alcohol copolymer is also given. In general, change in content of unsaturated or aromatic species, change in concentration of monomer functionality, and change in the oxygen content was observed in the plasma polymerized films on aging.
XPS and NEXAFS spectroscopy were used for the chemical characterization of pulsed plasma-deposited ethylene films before and after exposure to ambient air. The influence of external plasma parameters on the spectroscopic results was investigated. Information on the chemical character of the plasma-polymerized films, such as the regularity of the primary structure, the amount of long-living radicals, and branching or cross-linking or both was derived from this data. Irregularity and radical concentration for post-plasma reactions of the plasma-deposited films increased with the duty cycle or power. A decreased level of monomer fragmentation and, consequently, an increase in regularity is partially concluded from the experimental data when the monomer pressure is increased. The concentration of surface radicals available for post-plasma reactions also increased with monomer pressure. The correlation found between the degree of the post-plasma oxygen incorporation and the variation of the various external parameters agreed with earlier ToF-SSIMS findings.
Molecular engineering of polymer surfaces that includes the attachment of functional molecules to existing or previously generated reactive chemical groups like e.g., - OH, - NH2, or - CHO requires simple strategies and tools for the controlled generation of surface functionalities and their derivatization as well as for their identification and eventually quantification. Here, we systematically investigate the plasma-chemical surface modification of polypropylene films in combination with dansyl labeling chemistry and conventional, yet costly, XPS and highly sensitive fluorescence spectroscopy for the detection of surface groups. Based on these results, the potential of and requirements on the fluorometric characterization and quantification of surfaces functionalities are discussed.
Static ToF-SIMS analysis of plasma chemically deposited ethylene/allyl alcohol co-polymer films
(2006)
A plasma co-polymerization of ethylene as a chain extending monomer and allyl alcohol as a carrier monomer for hydroxyl groups was studied. The composition of the feed gas was systematically varied and the plasma co-polymers were analyzed in terms of their relative concentrations of OH functional groups by static Time of Flight Secondary Ion Mass Spectrometry (ToF-SIMS) immediately after their preparation without any air contact, i.e., under so called in situ conditions.
The relative OH group concentration involved in the CH2OH groups was derived from the normalized yields of the CH3O+ secondary fragment ion. The density of functional groups in the plasma co-polymers was found to vary non-linearly with respect to the mole percentage of the monomers in the feed gas.
Co-polymerization phenomena, i.e. chemical interactions and recombination reactions taking place between monomer molecules in the plasma and/or during the deposition process, become evident in ToF-SIMS spectra.
Chemical properties of plasma-polymerized styrene films can be effectively controlled by the appropriate choice of external plasma parameters, such as duty cycle, power and monomer pressure. Chemical properties here are the regularity of the primary structure, the amount of long living radicals and branching or cross-linking or both in plasma polymerized styrene films, which can be indirectly monitored by X-ray photoelectron spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Principally, XPS and NEXAFS spectra of plasma-polymerized styrene show all the spectroscopic fingerprints characteristic of atactic polystyrene indicating an inherent similarity of the respective primary chemical structures. There is an increase in irregularity and radical concentration for the plasma deposited films with increasing duty cycle or power. With an increase in monomer pressure, a decreased level of monomer fragmentation and, consequently, an increase in regularity must be concluded from the experimental data. The applied power regulates the fragmentation of the monomers as monitored by spectroscopic signals correlated to the aromatic rings. A trend in the extent of the post-plasma oxygen incorporation according to the variation of the various external plasma parameters was deduced, which agrees with earlier ToF-SIMS findings
Pulsed-plasma-deposited ethylene films were studied by time-of-flight static secondary ion mass spectrometry (ToF-SSIMS) before and after exposure to ambient air. The influence of the external plasma parameters on the secondary ion mass spectra of plasma-deposited ethylene films was investigated. From these data, information on the chemical character of the plasma-deposited ethylene films was derived. The investigation of the effect of external plasma parameters on the chemical character of the plasma-deposited ethylene films revealed that there were some drastic changes in the secondary ion mass spectra of the films. It was found that fragmentation and re-arrangement of the monomer molecules in the plasma, which affects the chemical character of the deposited films, vary according to the external plasma parameters. When the plasma polymers are exposed to air, extensive oxygen incorporation occurs. The oxygen uptake is high at the beginning and then it levels of. Some indications for the formation and decay of peroxy radicals (COO) and, subsequently, hydroperoxides (COOH) are found. It was observed that the oxygen uptake of the plasma deposited ethylene films increase when the plasma conditions become harder.
Selected FTIR, XPS and NEXAFS spectroscopy results obtained with films deposited with different plasma polymerization processes and different monomers (styrene, acetylene, ethylene and butadiene) are presented. In detail FTIR spectra, XPS surveys, XPS valence bands and core level signals including shake-up features as well as carbon K-edge absorption spectra are qualitatively and, in some cases, semi-quantitatively considered. Information on the film formation, the chemistry of the films and the film stability against air exposure are derived from spectroscopic features. With styrene chemically rather well defined plasma polymer layers can be formed with rather high deposition rates applying a pulse plasma process. Using ethylene, acetylene or butadiene as a monomer in the plasma deposition process the deposition rates are smaller. Using these monomers plasma polymer films can be obtained with a primary chemical structure which is similar to each other but more or less different from those of the respective conventional polymers. The main difference between these samples is their individual concentration of unsaturated carbon species. Finally, a technologically relevant example, i.e. a plasma deposited polymer barrier layer deposited on the inner wall of a poly(ethylene) vessel is briefly considered.
Several possibilities exist to produce a modified polymer surface with a high density of only one sort of functional group such as: (i) the plasma grafting of unfragmented monomer molecules and their polymerization forms OH, NH2, COOH groups, etc. in concentrations of approximately 25 groups per 100 C atoms; (ii) selective plasma bromination provides 1025 CBr groups; (iii) the plasma oxidation of polymer surfaces in an O2 plasma followed by the chemical reduction of all O-containing groups to OH groups by diborane, vitride (Na complex) or LiAlH4 yields 914 OH groups per 100 carbon atoms; and (iv) the grafting of spacers with different endgroups onto OH or CBr groups produces 710 spacer molecules/100 C. This work was focused on the formation of thin plasma deposited polymer layers with a maximum of (homo)functional groups and with a minimum of chemical irregularities using the pulsed plasma technique. The monomers were allylalcohol, allylamine, acrylonitrile and acrylic acid. The further intent was to study the interactions of functional groups (OH, COOH, NH2) and deposited metals (Cr, Al, Ti). It was expected that more basic (NH2), weakly basic or neutral (OH) or more acidic (COOH) groups would show different interactions and chemical reactions with metal atoms.
The retention of chemical structure and functional groups during plasma polymerization was investigated. Usually plasma polymer layers, prepared by a continuous wave radio-frequency plasma, are often chemically irregular in their structure and composition. To minimize these irregularities low wattages and the pulsed plasma technique were applied to avoid fragmentations. The first goal was to produce plasma polymers comprising double or triple bonds as precursors for electrically conducting polymers. Acetylene, ethylene, butadiene and polystyrene were used as monomers and deposited as thin polymer films by pulsed plasmas of low wattages. Styrene polymerization was strongly enhanced in the dark phase (plasma off) of a pulsed r.f. plasma caused by the reactivity of the vinyl-type double bond. This could be confirmed by a verification of a rather high chemical regularity of the film sample. The oxygen content of this film measured by X-ray photoelectron spectrometry (XPS) was in situ 0% and after 24 h exposure to air lower than 1%. Additionally, post-plasma oxidations of trapped radicals with air could be suppressed using NO gas as radical quencher. Such quenched plasma polymer layers were completely stable against oxidation for a number of weeks. During the low-wattage pulse plasma polymerization metal atoms were simultaneously or layer by layer evaporated into the growing layer and in situ measured by XPS. These metal atoms are acting as dopants. Here, Li, K, Mg and Cr were used at different concentrations providing electrical conductivity and magnetic properties for the film.
The chemical and morphological stabilities of polymer segments in the near-surface layer were investigated by spectroscopic methods such as X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectroscopy. Model studies were undertaken with LangmuirBlodgett films, self-assembled monolayers and oligomer films. For thin polymer layers (30 to 500 nm), the changes in molecular-weight distributions of some polymers were investigated systematically by size exclusion chromatography, matrix-assisted laser desorption/ionizationtime-of-flight mass spectrometry and thermal-field flow fractionation for oxygen- and helium-plasma exposures. The polymer surfaces were found to be relatively stable at exposure to an oxygen low-pressure plasma up to ca. 2 s. This is important information to get maximum adhesion to metals in composites. In correlation to their redox potentials, potassium, aluminium and chromium react with oxygen functional groups at the polymer/metal interface. In a dedicated study, chromium was found to attack aromatic rings and form different reaction products.
Polymer surfaces can be finished with functional groups upon exposure to a plasma. Species of the plasma gas are attached at surface carbon atoms, forming functional groups of different composition. To produce a modified polymer surface with a high density and homogeneity of hydroxyl groups only, the oxygen-plasma-formed oxygen functional groups were chemically reduced by diborane and LiAlH4 with yields of 10 to 11 OH groups per 100 carbon atoms in the 3 to 5 nm near-surface layer as detected by X-ray photoelectron spectroscopy (XPS). The identification of hydroxyl groups was performed by means of attenuated total reflectanceFourier transform infrared spectroscopy and XPS.
Surface-Enhanced Infrared Absorption (SEIRA) and Its Use in analysis of Plasma-Modified Surface
(1999)
The influence of different types of low and atmospheric pressure plasma on poly(ethylene terephthalate) (PET) has been studied in terms of changes in molar mass and molar mass distribution. Apart from a variation of plasma gases (oxygen, helium) different types of plasma (microwave, radio frequency, corona discharge) were used for the plasma surface modification. The changes in molar mass and types of functional end groups of lower molar mass products were investigated by means of matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOFMS), whereas the high-molar mass fraction was analyzed by means of size-exclusion chromatography (SEC). The formation of crosslinked products during exposure to a helium plasma, which emits preponderately energy-rich and intense ultraviolet radiation, was proved by means of thermal field-flow fractionation (ThFFF). This method combined with a multiangle laser light scattering (MALLS) detector allows detection of weakly crosslinked polymers and microgels. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1639-1648, 1998
Effects of Heat Treatment on the Structure of Thermal Plasma Synthesized SiCN Composite Nanopowders
(2003)
SiCN composite nanopowders with different chemical composition and characteristics were synthesized by the RF induction plasma at atmospheric pressure. Frequently the as-produced powders exhibit a high degree of chemical disorder or structural defects. Because the composition and the microstructure of starting powders have a great influence on the properties of composite ceramics, the changes of chemical composition, crystallization, and morphology of the as-produced powders during heat treatment up to 1500 °C were investigated in detail.
Modelling plasma-induced reactions on polymer surfaces using aliphatic self-assembling and LB layers
(1998)
Different types of plasma, irradiative and chemical activation were compared in terms of surface functionalization. Corona and spark jet plasmas are characterized by low gas temperatures and high rates in surface modification. UV irradiation in the presence of ozone does not involve any particle bombardment and acts only by enhanced photooxidative processes. Although ion implantation can be avoided, this method is not free of radiative damage in both the surface-near region and the bulk of polymers. Furthermore, its functionalization rate is low. In relation to low-pressure O2 plasma modification, all treatments mentioned here have a low efficiency in adhesion promotion due to oxidative degradation of macromolecules and formation of molecular debris known as the ''weak boundary layer''.
Polybutadienes (PB) and polyisoprenes (PI) with various molecular weights and polydispersities were epoxidized applying two different synthetic routes. The degree of epoxidation was determined by means of matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). It has been found that the degree of functionalization of polybutadiene is generally lower than that for polyisoprenes. Additionally, PB shows lower degrees of epoxidation at higher masses, whereas the level of functionalization of PI was unaffected by the molar mass. Coupling of gel permeation chromatography (GPC) with MALDI-TOF mass spectrometry was successfully used for the investigation of epoxidized polymers with higher masses. Using mass spectra of single fractions, the degree of epoxidation could be determined and applied for a calibration of GPC.
Pulsed plasma deposited styrene and ethylene films were studied by Time of Flight Static Secondary Ion Mass Spectrometry (ToF-SSIMS) before and after exposure to ambient air. The influence of the external plasma parameters on the secondary ion mass spectra of plasma deposited films was investigated. Approaches for the interpretation of SSIMS spectra of organic materials were reviewed and applied to the evaluation of SSIMS data of plasma deposited films. From these data, information on the chemical character of the plasma deposited films was derived.
When the plasma polymers are exposed to air oxygen incorporation occurs. The oxygen uptake is high at the beginning and then it levels of.
A relation that higher the regularity of the film lower is the oxygen uptake was found. Harder plasma conditions, which could be obtained by applying higher plasma power or lower monomer flow rate, result in higher oxygen uptake and vice versa.
Plasma polymerised films of acrylic acid, allyl alcohol and allyl amine were prepared and studied by XPS (X-ray photoelectron spectroscopy) and XAS (X-ray absorption spectroscopy). The influence of external plasma parameters on certain chemical aspects of the films was investigated. The use of XPS and NEXAFS (near edge X-ray absorption fine structure) as complimentary tools in the surface characterisation of thin films has been highlighted. Certain chemical aspects of the plasma polymerised films such as presence of ROCdouble bond; length as m-dashO in the case of plasma polymerised acrylic acid films, presence of RCdouble bond; length as m-dashO and RCOR bonds in case of plasma polymerised allyl alcohol films and presence of RCdouble bond; length as m-dashN and C?N in case of plasma polymerised allyl amine films were studied. The concentration of ROCdouble bond; length as m-dashO species was found to decrease with increase in r.f. duty cycle in the case of plasma polymerised acrylic acid films. In case of plasma polymerised allyl alcohol films there is a decrease in the concentration of RCdouble bond; length as m-dashO species and increase in the concentration of RCOR species at higher pressures, while in the case of plasma polymerised allyl amine films the concentration of RCdouble bond; length as m-dashN and C?N increases at higher powers, with an increase in C?N more pronounced at higher powers.
Mixtures of hexamethyldisiloxane (HMDSO) and oxygen have been used for deposition of SiO2-like layers by plasma polymerization under low-pressure conditions onto polyethylene and polystyrene used as basecoat. Water glass was cast onto these 0.5 µm plasma thick siloxane-like layers with a thickness of 5 to 40 µm. The adhesion of these bilayer systems and their flame resistance were tested.
The effect of different plasma parameters such as monomer/gas ratio, pressure and power input into the discharge on the deposition rate and the composition of the formed layers was studied. Characterization and chemical composition of the formed films were performed using infrared, X-ray photoelectron and solid state nuclear magnetic resonance spectroscopy.
Peel strengths of composites were measured and the locus of peel front propagation was detected. Thermal properties of composites were analyzed by thermo-gravimetric analysis. Finally, the fire-retardant properties of thick coated polymers were determined by exposure to flames and the behavior of coatings on the polymers during flaming was observed visually.
1Brominated carbon nanotubes as effective catalysts for petroleum hydrocarbons aerobic oxidation
(2012)
Copolymers of acrylic acid and styrene (AA/S) were prepared by pulsed plasma deposition and their structures were studied in dependence on the duty cycle (DC) for a fixed composition of 1:1. As a result, low values of DC doses preserve the structure of monomers in the plasma deposited polymers while high DC leads to a higher degree of fragmentation and a loss in regular structure. Regarding plasma copolymerisation as a feasible method to finish surfaces with a definite number of functional groups it is necessary to characterize both, the chemical nature and the physical properties of the deposited layer. Therefore, a combination of different methods was employed for the characterization of thin plasma copolymer films (FTIR, dielectric spectroscopy, differential scanning calorimetry, X-ray photoelectron spectroscopy (XPS)). Special attention was paid on the unambiguous identification of COOH groups at the surface after derivatization with trifluoroethanol by XPS and in the volume by FTIR. The glass transition temperature of the copolymer system is lower than that for the both plasma deposited homopolymers and increases with the DC in difference to plasma deposited poly(acrylic acid). The dielectric measurements showed that the plasma deposited films were not thermally stable and underwent an undesired post-plasma chemical reaction. The results obtained by dielectric spectroscopy are discussed in detail in comparison with the data from FTIR and XPS measurements.
Die Produktion von neuen effektiven und 'grünen' Weichmachern für Polyvinylchlorid (PVC) stellt eine der großen Herausforderungen in der chemischen Industrie dar. In diesem Beitrag wird über Ergebnisse von Untersuchungen berichtet, in denen symmetrische Ester einer Reihe von Fettsäuren und Triethylenglykol (TEG) gewonnen wurden und die als effektive Plastifizierungskomponenten verwendet wurden. Die Veresterung wurde unter Zugabe von Titandioxid Degussa P-25 in Nanopartikelgröße als umweltverträgliche Technologie durchgeführt. Eine gute Verträglichkeit und eine niedrige Flüchtigkeit der Ester auf Biobasis in den PVC-Rezepturen werden gezeigt und es konnten bessere physiko-mechanische Eigenschaften der PVC-Komposite eingestellt werden. Die Ester können als effektive und umweltfreundliche PVC-Weichmacher und als Ersatz für herkömmliche Phtalate empfohlen werden.
Three polyethylene (PE) types with different branching structures were subjected to air, water and ethanol aerosol-assisted dielectric barrier discharges (DBD) for surface modification. Using the air DBD the incorporated oxygen concentration was found to be independent on the branching of PE in contrast to the introduction of OH groups, which was PE-2 > PE-1 > PE-3. For water-aerosol DBD the succession of OH concentration was in the order of PE-1 > PE-2 > PE-3. Ethanol aerosol-assisted DBD produced the lowest concentration of OH groups also independent on the branching of PE. The chemical nature of introduced oxygen functional groups was inspected by X-ray photoelectron spectroscopy (XPS) and assigned as C–O, >C=O/CHO/O–C–O and O=C–O.
Degradation behavior of thin polystyrene films on exposure to Ar plasma and its emitted radiation
(2013)
Spin-coated films of amorphous polystyrene (PS) were exposed to argon plasma for a few seconds to several minutes. The PS film was either in direct contact with the plasma or was shielded from the direct plasma contact by filters with different cutoff wavelengths in the vacuum UV region or by a Faraday cage (FC) made from metal mesh to prevent the impinging of charged species. Only energy-rich neutrals and plasma radiation may be operative in presence of the FC. lithium fluoride (LiF) filter protects the sample from direct contact with the plasma. Wavelengths of plasma radiation shorter than c. 105 nm (≈ 11.8 eV) were cut off. Glass filters made of fused SiO2 have a cutoff at λ ≈175?nm completely the vacuum UV radiation of plasma (ca. 175 nm ≈ 7.0 eV). These energies are sufficient to produce C–C, C–H bond scissions in case of direct Ar plasma exposure and Ar plasma exposure with use of the LiF filter. Only quartz glass shielding did not produce significant effects on the polymer surface in comparison to the reference PS, either in surface energy or O/C ratio or in IR spectra. Oxygen plasma has worked most aggressive and had etched the PS film, thus establishing a steady state between introduction of new oxygen functionalities and polymer etching. Ar plasma exposure produces also oxidation and etching of the polymer films as the oxygen plasma. Using of a FC during Ar plasma exposure or the LiF filter a slightly weaker oxidation was observed.
Br bonding on plasma brominated graphite surfaces has been studied by using Near Edge X-ray Absorption Fine Structure (NEXAFS) and X-ray Photoelectron Spectroscopy (XPS). Br2 and bromoform were used as plasma gases in an r.f. cw low pressure plasma process. Kr plasma had been used to study separately the physical and chemical plasma etching effects. At early steps of plasma bromination which lead to only small XPS Br surface concentration values a quick decay of aromaticity has been observed. At low Br surface concentration radical or even electrophilic addition of bromine onto sp2 carbon atoms is discussed as the dominating reaction pathway. At higher Br surface concentrations the inherent formation of sp3 defects in the graphene network by chemical etching processes promotes nucleophilic substitution of bromine at sp3 carbons as a competing reaction pathway. Both reaction pathways lead to CBr species characterized by the same Br 3d XPS binding energy. However more than one Br 3d component in XP spectra has been found at lower Br2 plasma induced Br surface concentrations and complexation of bromine at HOPG is assumed as a third way of interaction with Br2 plasma.
Brominated single-walled carbon nanotubes [(Br)n-SWCNT) produced by the plasma-chemical technique were involved in the liquid-phase process of hydrocarbons aerobic oxidation. The significant catalytic effect of the (Br)n-SWCNT was revealed at first by the cumene initiated model oxidation and then in experiments on profound aerobic oxidation of petroleum naphthenic fraction derived from the commercial Azerbaijan (Baku) oils blend diesel cut. The ability of (Br)n-SWCNT to accelerate the aerobic oxidation of the hydrocarbons was found out for the first time. Obviously this phenomenon originates from the peculiarities of electronic configuration of the (Br)n-CNT patterns. The plausible mechanism of (Br)n-SWCNT catalytic action is inclined to the formation of reactive oxygen species. The catalytic activity of (Br)n-SWCNT markedly exceeds the activity of the industrial catalysts, manganese salt of indigenous petroleum acids, used for the liquid phase petroleum hydrocarbons oxidation process.
The applicability of polymer-metal composites is mainly determined by the durability of the adhesive strength between both components. Aluminium (Al) deposited on polypropylene (PP) exemplifies different options of interface design. By deposition of plasma polymers on PP the effect of the type of the functionality was investigated. Spacer insertion was accomplished to position the functional group away from the topmost surface. A further kind of interface design involved a partial condensation of functional groups. Hydroxyl and carboxyl groups were most effective to improve adhesion in Al-PP systems. Approximately 7-10 carboxyl or 25-27 hydroxyl groups per 100 C atoms were necessary to increase the peel strength up to ~700 N/m. In this range, the failure of the composite propagated along the interface Al-tape (no peeling of the metal). Spacer molecules between surface and functional groups provoked the effect that the number of needed functional groups for maximum adhesion was strongly reduced. Linking of the functional groups resulted in non-peelable Al-PP laminates. Two adhesion tests were applied - the peel test and the centrifuge technology. For PP foils modified with chemically bonded and additionally linked silanol groups (no peeling) an adhesive strength of (2.5 ± 0.2) N/mm² was determined by centrifuge technology. XPS inspection of both fracture surfaces indicated a sub-surface failure in the polymer.