Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (46)
- Zeitschriftenartikel (20)
- Vortrag (19)
- Beitrag zu einem Sammelband (9)
- Buchkapitel (8)
- Posterpräsentation (3)
- Dissertation (1)
Sprache
- Englisch (56)
- Deutsch (47)
- Mehrsprachig (3)
Schlagworte
- Baustoffe (12)
- Building materials (8)
- UHPC (8)
- Autogenes Schwinden (7)
- Earth block masonry (6)
- Nanotechnologie (6)
- Beton (5)
- Diagonal compression test (4)
- Earthen materials (4)
- Hochleistungsbeton (4)
- Hydratation (4)
- Lehmbau (4)
- Lehmsteinmauerwerk (4)
- Zement (4)
- Analytik (3)
- Anchor pins (3)
- Autoclaved aerated concrete (AAC) (3)
- Building Materials (3)
- Composite panels (3)
- Compressive strength (3)
- Forschung und Entwicklung (3)
- Gefüge (3)
- Lehmmauerwerk (3)
- Micro structure (3)
- Plastisches Schwinden (3)
- Prüfverfahren (3)
- Rammed earth (3)
- Schrumpfrisse (3)
- Ultra high performance concrete (3)
- Ultra-high performance concrete (3)
- Ultra-high performance concrete (UHPC) (3)
- Adhesion (2)
- Anti-Graffiti (2)
- Artificial weathering (2)
- Autoklavierung (2)
- C-S-H (2)
- Cellular lightweight concrete (CLC) (2)
- Compression test (2)
- Concrete (2)
- Cracks grouting (2)
- Druckfestigkeit (2)
- Earth construction (2)
- Earth mortar (2)
- Earthen construction (2)
- Einpressmörtel (2)
- Festigkeit (2)
- Grout mortar (2)
- Historical buildings (2)
- Historische Bauwerke (2)
- Hochleistungsbetone (2)
- Hydraulic lime (2)
- Hydrothermal curing (2)
- Initial shear strength (2)
- Instandsetzung (2)
- Kalkhydrat (2)
- Kapillardruck (2)
- Lehmmauermörtel (2)
- Lime based grout (2)
- Low emissions (2)
- Mechanical properties (2)
- Mikrorissbildung (2)
- Mikrostruktur (2)
- Natural ventilation (2)
- Normung (2)
- Numerical modelling (2)
- Porenstruktur (2)
- Prüfung (2)
- Pull-out tests (2)
- Repair (2)
- Rheology (2)
- Rissbildung (2)
- Schallemissionsanalyse (2)
- Stearates (2)
- Strength (2)
- Strengthening (2)
- Ultrahochleistungsbeton (2)
- Uniaxial compression test (2)
- Water repellent admixtures (2)
- Water-repellent admixtures (2)
- Zusatzstoffe (2)
- AKR (1)
- Acoustic emission (1)
- Advanced experimental setup (1)
- Advanced measurement setup (1)
- Aerogel (1)
- Air-tight building envelope (1)
- Airtight building (1)
- Alkali silica reaction (1)
- Ankerauszugsversuch (1)
- Ankerauszugsversuche (1)
- Ankertraglast (1)
- Autoclaved aerated concrete (1)
- Autoclaving (1)
- Behandlungsparameter (1)
- Bemessung (1)
- Betonfertigteil (1)
- Betonschallplatte (1)
- Bond strength (1)
- Brand (1)
- Brickwork masonry (1)
- Building component (1)
- Cellular lightweight concrete ^ (1)
- Cement paste (1)
- Climate control through building elements (1)
- Composite UHPC elements (1)
- Compression and shear testing (1)
- Computed tomography (1)
- Crack pattern (1)
- Cracking (1)
- Cyclic tests (1)
- Cyclinc loading (1)
- DIN norms (1)
- Datenträger (1)
- Diagonal compression tests (1)
- Druck- und Schubbeanspruchung (1)
- Druck- und Schubprüfung (1)
- Druckversuch (1)
- Druckversuche (1)
- Durability (1)
- Earth block (1)
- Earth block masonry (EBM) (1)
- Earth blocks (1)
- Earth masonry mortar (1)
- Earth panel (1)
- Earth plaster mortar (1)
- Earthen panel (1)
- Effective properties (1)
- Emission of pollutants from building materials (1)
- Emission testing (1)
- Ettringit (1)
- F.E.M. Modellierung (1)
- FEM analysis (1)
- FEM-Analyse (1)
- Failure mode (1)
- Faserbewehrung (1)
- Fasern (1)
- Fassaden (1)
- Festigkeitssteigerung (1)
- Feuchteabhängige Festigkeit (1)
- Fiber-reinforced composite (1)
- Finite element analysis (1)
- Finite element analysis (FEA) (1)
- Formaldehyde (1)
- Frost-Tausalz-Beanspruchung (1)
- Frühe Rissbildung (1)
- Funktionale Betonoberfläche (1)
- Germany (1)
- Grid indentation (1)
- Haftscherfestigkeit (1)
- Haltezeit (1)
- Heterogeneous system (1)
- Hochfester Beton (1)
- Hydration (1)
- Hydration products (1)
- Hygroscopic earth and wooden materials (1)
- Hygroscopic earthen and wooden building materials (1)
- Hygroscopic earthen and wooden materials (1)
- Hygroskopische Lehm- und Holzbaustoffe (1)
- Hygrothermal behaviour (1)
- ISO 15686 (1)
- In-plane loads (1)
- Industrial prefabrication (1)
- LCA (1)
- Lehmplatte (1)
- Lehmstein Mauerwerk (1)
- Lehmsteine (1)
- Life span (1)
- Lime based hydraulic gout (1)
- Lime based hydraulic grout (1)
- Lotuseffekt (1)
- Luftdichte Gebäudehülle (1)
- Macro-modelling approach (1)
- Masonry (1)
- Mechanical strength (1)
- Mechanische Eigenschaften (1)
- Micro chemical analysis (1)
- Micro texture (1)
- Micro-modelling approach (1)
- Microcracking (1)
- Microscopy (1)
- Mikrostrukturierung (1)
- Mineralogische Zusammensetzung (1)
- Modern earthen building materials (1)
- Moderne Lehmbaustoffe (1)
- Modified earth plaster (1)
- Mortars (1)
- Mörtel (1)
- Nachbehandlung (1)
- Nachhaltigkeit (1)
- Natural hydraulic lime (1)
- Natural materials (1)
- Natural pozzolans (1)
- Natural raw material (1)
- Natürliche Belüftung (1)
- Non-destructive testing (1)
- Nondestructive testing (1)
- Orientation distribution (1)
- Oscillation rheometry (1)
- Partial safety factor (1)
- Phase composition (1)
- Phase evolution (1)
- Phase stability (1)
- Phasenzusammensetzung (1)
- Photocatalysis (1)
- Plastic shrinkage (1)
- Plastic shrinkage cracking (1)
- Polyester fabric strips (1)
- Pore size distribution (1)
- Portland limestone cement (1)
- Portland limestone cement mortars (1)
- Pozzolana-lime (1)
- Pozzolana-lime mortars (1)
- Product quality (1)
- Production technology (1)
- Produktqualität (1)
- Pull-out test (1)
- Pull-out testing (1)
- Quality control (1)
- Radon (1)
- Reliability (1)
- Restoration (1)
- Restoration mortars (1)
- Rissmuster (1)
- Safety factors (1)
- Salt crystallization (1)
- Sand-lime block (1)
- Sandwich elements (1)
- Schadstoffemission von Baustoffen (1)
- Schallemission (1)
- Schubversuch (1)
- Schubversuche (1)
- Secondary cemetitious materials (1)
- Selbstaustrocknung (1)
- Selbstreinigende Oberfläche (1)
- Selbstreinigung (1)
- Self-desiccation shrinkage (1)
- Shear bond test (1)
- Shear strength (1)
- Shear-compression tests (1)
- Silane (1)
- Silikastaub (1)
- Siloxanes (1)
- Stahlfasern (1)
- Stampflehm (1)
- Standardisation (1)
- Standards (1)
- Static tests (1)
- Statische Druck- und Schubbeanspruchung (1)
- Sulfatangriff (1)
- TRC (1)
- Teilsicherheitsbeiwert (1)
- Testing (1)
- Textile reinforced concrete (TRC) (1)
- Thermal treatment (1)
- Tobermorite (1)
- Triplet test (1)
- Ultra-High Performance Concrete (UHPC) (1)
- Ultra-Hochleistungsbeton (1)
- Ultraschall (1)
- VOC (1)
- Verbundfestigkeit (1)
- Verformung (1)
- Verpressanker (1)
- Versagensart (1)
- Versagensmechanismen (1)
- Viscoelastic properties (1)
- Vorlagerungszeit (1)
- Waethering (1)
- Water absorption (1)
- Water repellence (1)
- Wärmebehandlung (1)
- X-ray diffraction (XRD) (1)
- Ziegelmauerwerk (1)
- Zonierung (1)
- Zusatzmittel (1)
- Zuverlässigkeit (1)
- Zuverlässigkeitstheorie (1)
- Zyklische Belastung (1)
- autoclaved aerated concrete (1)
- autoclaved aerated concrete (AAC) (1)
- autoclaving (1)
- cellular lightweight concrete (1)
- cellular lightweight concrete (CLC) (1)
- earth block masonry (1)
- facade composite panels (1)
- heat treatment (1)
- historical earthen building (1)
- material characterisation (1)
- nanoindentation (1)
- numerische Modellierung (1)
- partial safety factors (1)
- photocatalysis (1)
- rammed earth (1)
- self-cleaning (1)
- self-cleaning properties (1)
- static monitoring (1)
- super hydrophobicity (1)
- ultra-high performance concrete (UHPC) (1)
- uniaxial compression test (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (19)
The repair of earthen structures is not an easy task. Earth as a construction material has comparatively weak mechanical properties. It is also susceptible towards liquid water, were it can lose cohesion very quickly if certain moisture contents are exceeded. Repair concepts of structures built with such materials are therefore challenging. Historical earthen structures often exhibit damages in form of extensive cracking, which may have been caused by static or dynamic loads. Frequently these cracks are insufficiently or inappropriately repaired because of lack of knowledge and / or technology. In particular, the behaviour of crack repair by grouting poses a challenge in earthen materials and demands specific requirements for the grouting mortar, such as low water content, good water retention, low shrinkage. Grouting materials require additional specifications such as compatible strengths and Young’s modulus as well as good adhesion to the earthen substrates. In addition, grouts have to be sufficiently flowable to fill small cracks and voids without segregation or bleeding. Therefore, the rheological behaviour has to be well understood and controlled to gain the desired effects.The repair of cracks in earthen buildings is traditionally done by stuffing manually mortar into the gap. Naturally, this method is only usable for cracks with large widths. Another disadvantage is that cracks going through thicker walls cannot be completely reached by the tools used for stuffing the mortar into the crack. Lime based grouts for earthen materials were usually used for re-attachment of plasters but less for structural reasons.Due to the nature of earthen materials grouts based on formulated or hydraulic lime (according to the definition in EN 459-1) have to meet considerable demands on a variety of properties, which are related to compatibility, durability and in particular to the ability of being injected. The goal of this study was to create a grout, which can be used to re-establish structural continuity in cracked earthen masonry or other massive earth walls (rammed earth and cob) with the focus on grouting cracks. The grout material was based on hydrated lime (calcium hydroxide) with additions of pozzolana and lime stone filler.
The repair of earthen structures is not an easy task. Earth as a construction material has comparatively weak mechanical properties. It is also susceptible towards liquid water, were it can lose cohesion very quickly if certain moisture contents are exceeded. Repair concepts of structures built with such materials are therefore challenging. Historical earthen structures often exhibit damages in form of extensive cracking, which may have been caused by static or dynamic loads. Frequently these cracks are insufficiently or inappropriately repaired because of lack of knowledge and / or technology. In particular, the behaviour of crack repair by grouting poses a challenge in earthen materials and demands specific requirements for the grouting mortar, such as low water content, good water retention, low shrinkage. Grouting materials require additional specifications such as compatible strengths and Young’s modulus as well as good adhesion to the earthen substrates. In addition, grouts have to be sufficiently flowable to fill small cracks and voids without segregation or bleeding. Therefore, the rheological behaviour has to be well understood and controlled to gain the desired effects.
The repair of cracks in earthen buildings is traditionally done by stuffing manually mortar into the gap. Naturally, this method is only usable for cracks with large widths. Another disadvantage is that cracks going through thicker walls cannot be completely reached by the tools used for stuffing the mortar into the crack. Lime based grouts for earthen materials were usually used for re-attachment of plasters but less for structural reasons. Due to the nature of earthen materials grouts based on formulated or hydraulic lime (according to the definition in EN 459-1) have to meet considerable demands on a variety of properties, which are related to compatibility, durability and in particular to the ability of being injected. The goal of this study was to create a grout, which can be used to re-establish structural continuity in cracked earthen masonry or other massive earth walls (rammed earth and cob) with the focus on grouting cracks. The grout material was based on hydrated lime (calcium hydroxide) with additions of pozzolana and lime stone filler.
This study presents diagnostic techniques to assess the structural vulnerability of earthen buildings. Medieval structures at Ambel (near Zaragoza, Spain), once a preceptory or monastic house belonging to the Military Orders, provide a useful case study. After more than a thousand years of construction, failure and repair from the 10th century to the present day, Ambel preceptory today is characterised by marked inhomogeneities: construction materials and structural typologies are juxtaposed, with structural discontinuities at the interfaces between construction phases. This paper argues that, while static analysis is an essential prerequisite before a suitable maintenance program can be defined, no evaluation of the structural behaviour of any historic building can ignore an understanding of the building’s history.
The study evaluates Portland limestone cement mortars, natural hydraulic lime mortars and pozzolan-lime mortars modified with water-repellent admixtures (metal soaps and siloxanes) for their use in the maintenance of historic buildings. The chemical-physical characteristics, the durability and the resistance to artificial weathering (exposure to UV light and artificial rain) were examined. The exposure conditions used in the ageing test were chosen in order to simulate outdoor environmental conditions, in particular the processes caused by UV-light and thermal shock induced by rain water.
Beton ist als Massenbaustoff vielseitig einsetzbar. Eine der neuesten Entwicklungen ist Ultrahochleistungsbeton (UHPC). Seine besonderen Eigenschaften ermöglichen eine zusätzliche Funktionalisierung der Oberflächen, da annähernd beliebige Mikrostrukturen exakt abgeformt werden können. So lassen sich beispielsweise Fassadenelemente aus UHPC bereits bei ihrer Herstellung im Betonfertigteilwerk mit selbstreinigenden Oberflächen ausrüsten. Eine andere Möglichkeit ist eine Anwendung als Datenspeicher. Wie das Beispiel der Schallplatte aus UHPC zeigt, lassen sich Muster, die hier die Schallinformationen enthalten, exakt von einer Matrize kopieren.
Es ist bekannt, dass eine Faserbewehrung die Schrumpfrissbildung in Beton vermindern kann. In der Literatur finden sich jedoch zum Teil widersprüchliche Angaben über die Wirksamkeit unterschiedlicher Faserarten, und deren Wirkungsmechanismus ist noch nicht vollständig geklärt. Fasern, die in Deutschland als Betonzusatzstoff eingesetzt werden sollen, bedürfen einer Zulassung durch das DIBt, das für den Nachweis ihrer Wirksamkeit zur Verminderung der Schrumpfrissbildung ein Prüfverfahren mit großformatigen Platten vorschreibt. In diesem Bericht werden die Ergebnisse einer Studie vorgestellt, in der die Eignung verschiedener Prüfverfahren hinsichtlich der Beurteilung der Wirksamkeit von Polymerfasern untersucht wurde. Dieser Bericht ist eine verkürzte Fassung eines Beitrags zum 52. Forschungskolloquium des DAfStb.
Beton ist als Massenbaustoff vielseitig einsetzbar. Eine der neuesten Entwicklungen ist Ultrahochleistungsbeton (UHPC). Seine besonderen Eigenschaften ermöglichen eine zusätzliche Funktionalisierung der Oberflächen, da annähernd beliebige Mikrostrukturen exakt abgeformt werden können. So lassen sich beispielsweise Fassadenelemente aus UHPC bereits bei ihrer Herstellung im Betonfertigteilwerk mit selbstreinigenden Oberflächen ausrüsten. Eine andere Möglichkeit ist eine Anwendung als Datenspeicher. Wie das Beispiel der Schallplatte aus UHPC zeigt, lassen sich Muster, die hier die Schallinformationen enthalten, exakt von einer Matrize kopieren.
Connections improvement plays a key role in seismic upgrade of historical buildings. Their global response is related to the behaviour of the single structural elements as well as by their mutual connections. Up to now limited data is available on the performance of grouted anchor pins in earthen materials where the critical point is the bond between the grout and the earthen substrate.
In this paper results of the experimental testing performed on earth block masonry are presented. Pull-out tests were carried out to investigate the bond strength and failure modes of stainless steel as well as glass fiber reinforced polymer (GFRP) rods with a lime based hydraulic grout and their compatibility with earth block masonry. GFRP rods were investigated as an alternative bonded-in anchorage material to the commonly used steel. In comparison with steel, they have a reduced weight and a reduced coefficient of thermal expansion. Their lower modulus of elasticity seems to be more compatible with the modulus of elasticity of earthen materials, although they exhibit a brittle fracture with lack of plastic phase.