Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- E-Modul (3)
- Resonanzmethode (3)
- Druckversuch (2)
- Keramische Verbundwerkstoffe (2)
- Resonance testing (2)
- Stress-strain behavior (2)
- Superconducting magnet (2)
- Zugversuch (2)
- Acoustic emission (1)
- Characterization (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (1)
ür die Berücksichtigung mechanischer Belastungen unterhalb der Streckgrenze ist im Rahmen einer zuverlässigen Bauteilauslegung die Kenntnis der elastischen Konstanten von besonderer Bedeutung. Für die experimentelle Bestimmung des Elastizitätsmoduls wurde eine Vielzahl von Verfahren entwickelt, die zum Teil werkstoffspezifisch Eingang in die Normung gefunden haben.
Prinzipiell können diese Verfahren in zwei Gruppen unterteilt werden: die statischen und die dynamischen Prüfverfahren. Die statischen Verfahren beruhen auf der direkten Messung des Spannungs-Dehnungs-Zusammenhangs während einer mechanischen Belastung im elastischen Verformungsbereich (Zug, Biegung, Druck). Die dynamischen Verfahren basieren auf der Schwingungsanregung eines Prüfkörpers und der Analyse der resultierenden Schwingungen (Resonanzmethode oder Impulsanregungsmethode) oder auf der Messung der Ultraschallausbreitungsgeschwindigkeit.
Stellvertretend für die dynamischen Verfahren wird im ersten Teil dieses Beitrages die Resonanzmethode vorgestellt. Der zweite Teil dieses Beitrages fasst die werkstoffabhängigen Ergebnisse der E-Modulbestimmung mit statischen Verfahren im Zug- und Biegeversuch zusammen.
Für die Berücksichtigung mechanischer Belastungen unterhalb der Streckgrenze ist im Rahmen einer zuverlässigen Bauteilauslegung die Kenntnis der elastischen Konstanten von besonderer Bedeutung. Für die experimentelle Bestimmung des Elastizitätsmoduls wurde eine Vielzahl von Verfahren entwickelt, die zum Teil werkstoffspezifisch Eingang in die Normung gefunden haben. Prinzipiell können diese Verfahren in zwei Gruppen unterteilt werden; die statischen und die dynamischen Prüfverfahren. Die statischen Verfahren beruhen auf der direkten Messung des Spannungs-Dehnungs-Zusammenhangs während einer mechanischen Belastung im elastischen Verformungsbereich (Zug, Biegung, Druck). Die dynamischen Verfahren basieren auf der Schwingungsanregung eines Prüfkörpers und der Analyse der resultierenden Schwingungen (Resonanzmethode oder Impulsanregungsmethode) oder auf der Messung der Ultraschallausbreitungsgeschwindigkeit. Stellvertretend für die dynamischen Verfahren wird im ersten Teil dieses Beitrages die Resonanzmethode vorgestellt. Der zweite Teil dieses Beitrages fasst die werkstoffabhängigen Ergebnisse der E-Modulbestimmung mit statischen Verfahren im Zug- und Biegeversuch zusammen.
The elastic properties of the single-crystal nickel-base superalloy CMSX-4 used as a blade material in gas turbines were investigated by the sonic resonance method in the temperature interval between room temperature and 1300 °C. Elastic constants at such high temperatures are needed to model the mechanical behavior of blade material during manufacturing (hot isostatic pressing) as well as during technical accidents which may happen in service (overheating). High reliability of the results was achieved using specimens of different crystallographic orientations, exciting various vibration modes as well as precise measurement of the material density and thermal Expansion required for modeling the resonance frequencies by finite element method. Combining the results measured in this work and literature data the elastic constants of the gamma and gamma' phases were predicted.
This prediction was supported by measurement of the temperature dependence of the gamma'fraction.
All data obtained in this work are given in numerical or analytical forms and can be easily used for different scientific and engineering calculations.
A test campaign was launched to determine the mechanical properties of the High Luminosity-Large HadronCollider (HL-LHC) 11 T Nb3Sn magnet components. The results can be used to accurately represent the mechanical properties in finite elementmodels that predict the stress and strain distribution in these magnets. Particular attention is paid to anisotropic mechanical behavior of the different magnet materials. Static and dynamic test methods have been applied for determining elastic materials’ behavior, and highly accurate Young’s moduli are obtained with the nondestructive dynamic methods resonance and impulse excitation at ambient temperature and during in situ heat cycles.
Thermal barrier coatings (TBCs) are used to increase the operating temperature of land-, sea-, or air-based turbines. As failure of the coating may result in serious damage of the turbine, reliable estimation of the lifetime is essential. Most experiments to assess the lifetime or to determine parameters for simulations of the behavior of TBCs are done by burner-rig-tests, where the operating conditions are simulated by cyclic heating of the surface and cooling of the backside of a coated sample.
In this work a possibility is presented to do comparable experiments by heating the surface with laser irradiation instead of a burner. For this purpose a Nd:YAG-laser with a maximum output power of 1?kW and a wavelength of 1064?nm is used. The laser spot can be moved by integrated optics across the sample surface to achieve homogeneous heating of the coating. Cooling of the backside is done by air. The temperature of the sample surface is determined by an infrared-camera which also enables the possibility to detect failures in the coating via thermography. Additionally, acoustic sensors attached to the sample holder are used to detect failures in the sample. The investigated ceramic material (yttria stabilized zirconia) has a very low absorption coefficient at the used laser wavelength. Therefore, a pre-treatment of the samples was needed to increase the absorption coefficient to be able to heat up the samples.
In this paper, the experimental setup and first experimental results are presented.
The knowledge of the temperature-induced changes of the superconductor volume and of the thermomechanical behavior of the different coil and tooling materials is required for predicting the coil geometry and the stress distribution in the coil after the Nb3Sn reaction heat treatment. In this paper, we have measured the Young’s and shear moduli of the HL-LHC 11 T Nb3Sn dipole magnet coil and reaction tool constituents during in situ heat cycles with the dynamic resonance method. The thermal expansion behaviors of the coil components and of a free standing Nb3Sn wire were compared based on dilation experiments.