Filtern
Erscheinungsjahr
- 2015 (7) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (3)
- Vortrag (3)
- Posterpräsentation (1)
Schlagworte
- Dielectric spectroscopy (1)
- ESI (1)
- Electrospray ionization (1)
- Ellman's test (1)
- Europium (1)
- Inductively coupled plasma-mass spectrometry (1)
- Layered double hydroxides (1)
- Liquid chromatography at critical conditions (1)
- MALDI (1)
- Matrix-assisted ionization ion mobility spectrometry mass spectrometry (1)
Eingeladener Vortrag
- nein (3)
Nanocomposites based on poly(ʟ-lactide) (PLA) and organically modified MgAl Layered Double Hydroxides (MgAl-LDH) were prepared by melt blending and investigated by a combination of Differential Scanning Calorimetry (DSC), Small- and Wide-Angle X-ray Scattering (SAXS, WAXS), and dielectric spectroscopy (BDS). Scanning microfocus SAXS investigations show that the MgAl-LDH is homogeneously distributed in the matrix as stacks of 6 layers and/or partly exfoliated layers. DSC and WAXS show that the degree of crystallinity decreases linearly with the content of LDH. The extrapolation of the dependencies (DSC and WAXS) to zero estimates a limiting concentration of LDH CCri of ca. 21 wt% where the crystallization of PLA is completely suppressed by the nanofiller. The dielectric behavior of neat PLA show two relaxation regions, a β-relaxation at low temperatures related to localized fluctuations and the α-relaxation at higher temperatures due to the dynamic glass transition. The dielectric spectra of the nanocomposites show several additional relaxation processes compared to neat PLA which are discussed in detail. For the nanocomposites around 260 K (ƒ = 1 kHz) an additional process is observed which intensity increases with increasing concentration of LDH. This process is mainly attributed to the exchanged dodecylbenzene sulfonate (SDBS) molecules which are adsorbed at the LDH layers and form a mixed phase with the polymer close to the layers and stacks. An analysis of this process provides information about the molecular dynamics in the interfacial region between the LDH layers and the PLA matrix which reveal glassy dynamics in this region. In the temperature range around 310 K (ƒ = 1 kHz) a further process is observed. Its relaxation rate has an unusual saddle-like temperature dependence. It was assigned to rotational fluctuations of water molecules in a nanoporous environment provided by the LDH filler. Above the glass transition temperature a further process is observed at temperatures above. It is related to Maxwell/Wagner/Sillars polarization due to the blocking of charges at the nanofiller.
The analytical utility of a new and simple to use ionization method, matrix-assisted ionization (MAI), coupled with ion mobility spectrometry (IMS) and mass spectrometry (MS) is used to characterize a 2-armed europium(III)-containing poly(ethylene glycol) (Eu-PEG) complex directly from a crude sample. MAI was used with the matrix 1,2-dicyanobenzene, which affords low chemical background relative to matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI). MAI provides high ion abundance of desired products in comparison to ESI and MALDI. Inductively coupled plasma-MS measurements were used to estimate a maximum of 10% of the crude sample by mass was the 2-arm Eu-PEG complex, supporting evidence of selective ionization of Eu-PEG complexes using the new MAI matrix, 1,2-dicyanobenzene. Multiply charged ions formed in MAI enhance the IMS gas-phase separation, especially relative to the singly charged ions observed with MALDI. Individual components are cleanly separated and readily identified, allowing characterization of the 2-arm Eu-PEG conjugate from a mixture of the 1-arm Eu-PEG complex and unreacted starting materials. Size-exclusion chromatography, liquid chromatography at critical conditions, MALDI-MS, ESI-MS, and ESI-IMS-MS had difficulties with this analysis, or failed.
The surface modification of nanometer- and micrometer-sized particles and planar substrates with polyethylene glycol (PEG) ligands of varying length is a very common strategy to tune the hydrophilicity and biocompatibility of such materials, minimize unspecific interactions, improve biofunctionalization efficiencies, and enhance blood circulation times. Nevertheless, simple methods for the quantification of PEG ligands are comparatively rare. Here, we present a new concept for the quantification of PEG ligands for maleimide-functionalized PEG molecules and the determination of PEG coupling efficiencies, exploiting the quantitative reaction of maleimide with ʟ-cysteine, and the subsequent determination of the unreacted thiol with the photometric Ellman's test. This is shown for heterobifunctional PEG spacers of varying length and amino-functionalized polystyrene nanoparticles (PS NP) without and with differently charged encoding dyes. The reaction of ʟ-cysteine with the Ellman's reagent was monitored photometrically and with electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) to derive the reaction mechanism and to obtain the stoichiometry factor for ʟ-cysteine quantification. Mass balances and quantification of ʟ-cysteine via its sulfur concentration using elemental analysis and inductively coupled plasma mass spectrometry (ICP-MS) confirmed the accuracy and reliability of this approach that can be extended to other surface groups and ligands.