Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (9)
- Vortrag (8)
- Zeitschriftenartikel (4)
- Posterpräsentation (3)
Schlagworte
- Distributed acoustic sensing (10)
- C-OTDR (6)
- Structural health monitoring (6)
- Composite structures (4)
- Distributed fibre optic sensors (4)
- Optical backscatter reflectometry (4)
- Optical fibre (4)
- Structural health monitoring (SHM) (4)
- Swept wavelength interferometry (SWI) (4)
- Distributed vibration sensing (3)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (8)
Es werden aktuelle Ergebnisse der quasi-verteilten Faseroptische Sensorik der BAM bzgl. der Diagnostik von Hochspannungskomponenten vorgestellt. Hierbei werden Ergebnisse der akustischen Teilentladungs-Überwachung von Kabelmuffen präsentiert.
Ferner werden Resultate zur Verbesserung der Fasersensoreigenschaften einer Faser durch induzierte Streuer dargestellt.
We have shown that for C-ODTR based DAS two UV-inscribed scattering segments within an optical fiber have a significant influence on the local sensitivity Fading characteristics. This method was experimental proven to be suitable for distributed dynamic strain measurement in a thermally unstable environment. Signal-to-noise ratio analyses for detecting a signal peak within the time-dependent spectra were performed. Results show an increase in SNR and additionally that the occurrence of total loss of sensitivity (SNR <1) could be decreased by a factor of six when compared to an untreated standard fiber.
Glass-fibre-reinforced plastics (GFRP) are commonly used for the construction of pressure vessels and tanks for example in automotive and aerospace industries. Especially for pressure vessels used for the storage of natural gas or hydrogen with operation pressures up to 700 bar, an early material fatigue detection is of great interest. Measuring the distributed strain profile of GFRP structures helps to understand and detect material fatigue. In this article, we demonstrate the great potential of swept wavelength interferometry (SWI) based distributed strain sensing for the monitoring of pressure vessels made from GFRP. A resin transfer molding (RTM) process was used to manufacture GFRP-tube specimens. Commercial optical fibres with polyimid coating were glued to the surface externally in circumferential and axial direction. A cyclic load of up to 150 bar was applied to the samples using a servo-hydraulic test bench. Comparing the loaded and unloaded test conditions, we determined up to 2 % elongation in circumferential direction. We demonstrate reliable distributed strain measurements with sub-centimetre spatial resolution. By monitoring these high-resolution strain profiles, we were able to detect local material degradation that manifested itself as localized strain changes. Crucially, the material Degradation could be detected already after 75 % of dat the fatigue life before a crack appeared that led to leakage.
Fibre-reinforced plastics (FRP) especially carbon-fibre-reinforced polymer (CFRP) and glass-fibre-reinforced polymer (GFRP) are commonly used materials in high pressure vessels and storage units for automotive and aerospace purposes. Optical fibres are suitable to be integrated or directly applied to the surface of FRP components. Using optical fibres it is possible to monitor the distributed strain profiles and changes within the fatigue life of a pressure vessel to ensure the operational safety. Within artificial ageing experiments we used swept wavelength interferometry (SWI) based distributed strain sensing for the monitoring of commercial high-pressure composite cylinder. This artificial ageing was performed using test conditions of 503bar pressure load (service pressure 300 bar) and 89 °C for 100 h. The polyimide coated optical fibres were glued to the surface externally in circumferential and axial direction. Using distributed strain sensing (DSS) material expansion of over 0.5% were monitored with sub-centimetre spatial resolution. Within the circumferential direction we observed up to 10 % local fluctuation compared to the median strain caused by inhomogeneous material expansion, which could cause local material fatigue. In addition, we determined material degradation manifested itself as localized remaining material expansion and/or contraction. Results have been validated by other non-destructive methods like digital strip projection.
Distributed vibration sensing (DVS) based on Rayleigh single pulse optical time-domain reflectometry (C-OTDR) is an attractive and robust method for a variety of sensing applications including geosensing. A key issue for the usability of DVS systems is the signal-to-noise ratio (SNR) and thus the feasibility to demodulate a measured signal, especially in the case of small dynamic strain amplitudes. We present a simple method to locally boost the sensitivity of DVS using pairs of fs-laser-written strongly scattering fiber segments.